• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2002년도 하계 학술대회 논문집
• /
• pp.66-71
• /
• 2002

파워시프트는 동력전달의 단속 없이 변속할 수 있는 변속 방식이다. 기어는 동기 물림식으로 되어 있으며, 유압 클러치를 통하여 주행 중에도 동력의 흐름을 제어할 수 있다. 주요 구성 요소는 동력 흐름을 제어할 수 있는 유압 클러치와 동력을 전달하는 기어 조합이며, 유압 클러치는 피스톤, 리턴 스프링, 디스크, 플레이트 등으로 구성되어 있다. 접속 시에는 유압 피스톤이 리턴 스프링을 압축하며 전진하여 플레이트와 디스크에 수직력을 가하고 이를 결합시켜 동력을 전달한다. 해제 시에는 리턴 스프링에 의하여 피스톤이 후퇴하고 동력이 차단된다. 이때 유압 제어 시스템은 최대 견인 부하에서도 변속을 원활하게 하기 위하여, 클러치 압력을 이용해 변속 중 작동 클러치의 토크를 정교하게 제어한다. (중략)

• 드라이브 ㆍ 컨트롤
• /
• 제12권4호
• /
• pp.83-86
• /
• 2015

• 드라이브 ㆍ 컨트롤
• /
• 제17권3호
• /
• pp.47-56
• /
• 2020

As a shift control of automatic transmission was managed with the electronic control unit (ECU), shift quality which is a measure of shift shock during gear change has markedly improved. However, the initial clutch pressure control of the clutch filling phase should continue to rely on the predetermined control input since the input and output speeds are unchanged until the shifting process attains the inertia phase. It is critical to minimize the clutch response time and control the clutch pressure accurately at the end of clutch fill to achieve quick shift response and smoothness. Advanced transmission companies have adopted an auto calibration method which establishes the databases for the clutch piston fill-up attributes and the frictional characteristics of the disks. In this study, a distinctive auto calibration algorithm for forklift transmission under development is proposed and verified with the real-vehicle test. The experimental calibration results showed consistent turbine dynamics at the initial stage of shifts with the properly calibrated clutch-fill control parameters. By using this technique, it is necessary to finalize the shift control for the various operation conditions.

• 드라이브 ㆍ 컨트롤
• /
• 제11권3호
• /
• pp.47-54
• /
• 2014

Clutches are an integral part of the automatic transmission for changing gears. Modern automatic transmissions make extensive use of wet multiple-disc clutches employing hydraulic actuation mechanism with electronic control. Although nowadays, highly advanced shifting algorithm implements the superior shift quality and transmission efficiency, its performance should be based on smooth, reliable engagement with a reasonably durable friction material as well as stable clutch piston dynamics. Particularly, clutch filling control is the crucial part of shifting process because only the open-loop control is available due to the lack of measurement. In this paper, the effect of clutch-fill control parameters on clutch piston dynamics is experimentally investigated by using clutch piston test equipment which enables the clutch piston to actuate similar to real shifting conditions. The experimental analysis results can be expected to be utilized for the calibration of proportional solenoid valve as reference current profile data in vehicle test.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1334-1339
• /
• 2003

An efficient method is developed for the shape optimization of 2-D structures. The sequential linear programming is used for minimization problems. Selected set of master nodes are employed as design variables and assigned to move towards the normal direction. After adapting the nodes on the design boundary, the B-spline curves and mesh smoothing schemes are used to maintain the finite element in good quality. Finally, a numerical implementation of optimum design of an automobile torque converter piston subjected to pressure and centrifugal loads is presented. The results shows additional weight up to 13% may be saved after the shape optimization.

• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.284-294
• /
• 1996

In this paper, dynamic characteristics of an AT clutch system were investigated considering the dynamics of check ball and hydraulic control valves. Dynamic model of a pressure control solenoid valve (PCSV) was obtained by Bondgraph and permeance method. Also, the clutch piston and check ball dynamics were modeled by considering the effect of centrifugal force of the oil entrapped in the clutch chamber. In order to validate the dynamic models obtained, plunger displacement of PCSV and pressure response of the clutch supply lines were compared with the available experimental data, which were in good accordance with the numerical results. Using the dynamic model of the clutch system, simulations were performed to investigate the effect of the rotational speed on the response of clutch cylinder pressure, clutch piston and check ball displacement, and oil flow rate into the cylinder and flow rate out of the check valve.