• Journal of the Korean Geotechnical Society
• /
• v.19 no.3
• /
• pp.5-13
• /
• 2003

The soil nailing is one of the useful support-system in urban excavation because of the presence of other structures in the vicinity Since the soil nailing system was introduced, model experiments and theoretical studies have been performed to investigate behavior of soil nailed wall. However, there are few data in the case of multi-layered soil strata just like Seoul Metropolitan area in Korea. The feed back analyses are carried out using the measured wall displacement data for soil nailing construction sites with multi-layered strata in order to analyze the distance and the coefficients of extension zone of ground behind soil nailed wall. As a result, the distance of extension zone increased with increasing of the final excavation depth and the ratio of the distance to the final excavation depth was shown to be about 94% of the final excavation depth. Also, the coefficients of extension zone increased with enlargement of soil layer thickness and converged into constant value of 1.05. On the other hand, the maximum vertical displacements by the feed back analysis and Caspe's method were shown to be approximately 80%, 150~280% of the maximum horizontal displacement respectively.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.247-256
• /
• 2009

This research was conducted to analyze the behavior of PTCP (Post-Tensioned prestressed Concrete Pavement) under tensioning by performing field tests when the experimental PTCP slab was being constructed. The displacements in the slab under the environmental loading and tensioning were measured using temperature measurement sensors and displacement transducers. Tensioning was performed three times and appropriateness of tensioning could be determined by investigating the relationship between temperature and displacement, behavior of transverse crack, and daily change in displacement. The results of this study showed that under the first tensioning at very early age, large displacements were observed only near the joints because of the friction between slab and underlying layer and concrete inelasticity. Under consecutive tensioning, displacements were clearly observed all over the slab, but still affected by the friction. In addition, appropriate tensioning ensured the one-slab behavior of the PTCP slab even though cracks existed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.151-151
• /
• 2020

표면영상유속측정법은 영상을 이용한 비접촉식 유속 측정 방법으로 카메라 외에 별도로 고가의 장비를 구매할 필요가 없을 뿐 아니라 현장 상황을 영상으로 확인할 수 있기 때문에 현장조사인력이 필요 없어 경제적이고, 안전하다는 장점을 갖고 있는 하천 유속 측정 방법이다. 표면영상유속측정법은 일반적으로 상호상관법을 이용하여 수표면을 촬영한 연속된 두 영상에서 입자군의 명암값 분포를 계산하여 입자군의 변위를 계산하고 이를 두 영상 사이의 시간 간격으로 나누어 입자군의 이동 속도를 산정하는 방법이다. 따라서 표면영상유속측정법으로 산정한 유속의 정확도를 높이기 위해서는 영상 내 두 입자군의 변위를 정확하게 계산하는 것이 무엇보다 중요하다. 즉, 분석하고자 하는 영상의 물리거리를 정확하게 계산할 수 있어야 한다. 카메라를 이용하여 실제 하천 영상을 촬영한 영상은 카메라 렌즈에 의한 왜곡이 필연적으로 발생하게 되고 이는 영상 내의 변위 산정 시에도 영향을 미친다. 특히 드론을 활용하여 넓은 하천 영역을 촬영할 경우 카메라 렌즈에 의한 왜곡은 실제 물리 변위 계산 정확도에 큰 영향을 미치게 된다. 이에 본 연구에서는 카메라 왜곡이 영상 내 변위 산정 결과의 정확도에 미치는 영향을 분석하였다. 연구 결과 카메라 렌즈 왜곡은 영상 중심에서 방사방향으로 점점 크게 발생하고 왜곡 정도는 비선형적으로 나타났으며, 변위 측정 오차는 영상의 중앙부에서는 거의 차이가 없었으며, 영상 외곽부에서 최대 오차가 발생하는 것으로 나타났다. 그리고 카메라 렌즈 왜곡 보정을 실시하게 되면 영상 전체적으로 변위측정 오차는 모두 제거할 수 있는 것으로 확인하였다. 따라서 카메라 렌즈 왜곡 보정을 실시하여 표면영상유속 측정 결과의 정확도를 개선할 수 있는 것으로 나타났다. 향후 카메라 렌즈 왜곡 보정을 실시한다면 하천의 표면유속을 보다 정확하게 측정할 수 있을 것으로 기대한다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.359-364
• /
• 1996

월성 2, 3, 4호기(중수로형 원자로) 원자로빌딩에 대한 지진절연 베어링의 효과를 예측하기 위해 해석적 연구를 수행하였다. 이를 위해 월성 원자로빌딩이 lumped-mass로 모델링되고 0.2g 설계 기준지진(DBE)을 적용하여 지진절연 베어링을 사용한 모델과 사용하지 않은 모델이 비교되었다. 지진절연 베어링을 사용하지 않은 원자로빌딩의 1차 고유진동수는 5.4Hz였고, 지진절연 베어링을 사용한 것은 0.7Hz까지 낮아 졌고 원자로빌딩 높이에 따라 거의 일정한 가속도로 나타났다. 지진절연 베어링을 사용하지 않은 원자로빌딩의 최대변위는 7mm였고 지진절연 베어링을 사용한 것의 변위는 106mm였다. 그러므로, 지진절연 베어링을 사용함으로써 지진하중은 크게 감소시키는 반면 큰 변위를 수용하기 위한 부가적설계가 수반되어야한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.419-420
• /
• 2020

본 논문에서는 불법복제 영상 판단을 위한 RGB 변위값 측정을 통한 360도 영상 식별 기준 키 프레임 선정 방법을 제안한다. 방송 프로그램이나 영화 등과 같은 콘텐츠는 인터넷들을 통하여 국내뿐만 아니라 해외로도 대량 불법 유통됨으로써 국가적으로 큰 손실이 발생하고 있다. 본 논문에서는 이러한 불법복제 여부를 빠른 속도로 판단하기 위한 방법으로 360도 영상에서 추출된 각각의 프레임에서 RGB 변위값을 측정하여 동일한 장면으로 인식되는 프레임을 하나로 묶어 해당 장면의 키 프레임으로 선정한다. 본 논문에서 제안한 방법은 불법복제 영상의 판단 시간을 단축시키고 판단 정확도를 향상시킬 수 있는 효과가 있다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.4
• /
• pp.594-606
• /
• 1996

This study was intended to perform the relationships between mandibualr lateral deviation in facial asymmetry patients and morphology of the cranial vault. In 30 patients(males 14, female 16) using submento-vertical cephalograms that were taken in the pre-operaticve state and posteroanterioir cephalograms that were taken in centric occlusion before, immediate and long term after surgery. 1. Mean mandibular deviation was about $-3.12^{\circ}$and mean of absolute measurement was about $2.50^{\circ}$on the submento-vertical cephalograms. 2. On the submento-vertical cephalograms, there was no significant difference between non-deviation and deviation side but it had tendency that deviation side was larger than non-deviation side on the frontal portion of cranium(Y10 to Y6) and deviation side was smaller than non-deviation on the temporal portion of cranium(Y5, Y-1 to Y-5). 3. Mean mandibular deviation was about $1.40^{\circ}$and mean of absolute measurement was about $3.95^{\circ}$on the posteroanterioir cephalograms. 4. There was statistical significance on the influence of surgical change(PT2A-PT1A) to the relapse(PTLA-PT2A)(p<0.05). The more increasing of the change, the more relapse on the posteroanterioir cephalograms. 5. There was no statistical significance on the influence of degree of mandibular deviation to morphology of the cranium on the submento-vertical cephalograms. But it had tendency that the more mandibular deviation, the larger the non-deviation side on the anterior cranium and deviation side on the posterior cranium(p>0.05). 6. There was statistical significance on the influence of the degree of mandibular deviation on the posteroanterioir cephalograms to the difference between non-deviation and deviation side. The more increasing of mandibular deviation, the larger the non-deviation side on the Y4 to Y-6(p<0.05). 7. There was no statistical significance on the influence of difference between non-deviation and deviation side to the relapse on the posteroanterioir cephalograms. But it had tendency that the more increasing of the differece between non-deviation and deviation side, the more increasing the relapse on temporal of cranium.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.1-9
• /
• 2024

This study proposes a multi-scale template matching technique with image pyramids (TMI) to measure structural dynamic displacement using a vision sensor under atmospheric turbulence conditions and evaluates its displacement measurement performance. To evaluate displacement measurement performance according to distance, the three-story shear structure was designed, and an FHD camera was prepared to measure structural response. The initial measurement distance was set at 10m, and increased with an increment of 10m up to 40m. The atmospheric disturbance was generated using a heating plate under indoor illuminance condition, and the image was distorted by the optical turbulence. Through preliminary experiments, the feasibility of displacement measurement of the feature point-based displacement measurement method and the proposed method during atmospheric disturbances were compared and verified, and the verification results showed a low measurement error rate of the proposed method. As a result of evaluating displacement measurement performance in an atmospheric disturbance environment, there was no significant difference in displacement measurement performance for TMI using an artificial target depending on the presence or absence of atmospheric disturbance. However, when natural targets were used, RMSE increased significantly at shooting distances of 20 m or more, showing the operating limitations of the proposed technique. This indicates that the resolution of the natural target decreases as the shooting distance increases, and image distortion due to atmospheric disturbance causes errors in template image estimation, resulting in a high displacement measurement error.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.302-309
• /
• 2008

We present the precise visual measurement method of rotational displacements using two different moire fringes simultaneously generated by repeated sinusoidal gratings. We investigate the variation of moire fringes depending on rotational displacements through computer simulation and experiment using a rotator in detail. The moire fringes are composed of the wide linear fringe part with a long period and the narrow linear fringe part with a short period. These parts are superior to the angle detection of more than 12 degrees and less than 12 degree, respectively. Additionally, the method can be visually used in the determination of the rotational direction by observing the moire fringe's direction.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.93-113
• /
• 2019

The behavior of the 3 hinged precast arch structure was investigated by comparing field measurements with numerical analyses performed for precast lining arch structures, which are widely used for the open-cut tunnel. According to the field measurements, the maximum vertical displacement occurred at the crown with upward displacements during the backfilling up to the crown of the arch and downward displacements at the backfill height above the crown. The final crown displacement was 19 mm upward from the original position. The horizontal displacement at the sidewall, which had a maximum horizontal displacement, occurred inward of the arch when compacting the backfill up to the crown and returned to the original position after completing the backfill construction. According to the analysis of displacement measurements, economical design is expected to be possible for precast arch structures compared to rigid concrete structures due to ground-structure interactions. Duncan model gave good results for the estimation of displacements and deformed shape of the tunnel according to the numerical analyses comparing with field measurements. The earth pressure coefficients calculated from the numerical analyses were 0.4 and 0.7 for the left and the right side of the tunnel respectively, which are agreed well with the eccentric load acting on the tunnel due to topographical condition and actual field measurements.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.11
• /
• pp.99-107
• /
• 2007

The linear curve fitting methods such as the Hvorslev method and the Bouwer and Rice method provide a rapid and simple means to analyze slug test data for estimating in-situ hydraulic conductivity (k) of geologic material. However, when analyzing a slug test in a relatively compressible aquifer, these methods have difficulties in fitting a straight line to the semi-logarithmic plot of the test data that shows a concave-upward curvature because the linear curve fitting methods ignore the role of the compressibility or specific storage ($S_s$) of an aquifer. The comparison of the Hvorslev method and the Bouwer and Rice method is made far a partially-penetrating well geometry to show analytically that the Hvorslev method estimates higher hydraulic conductivity than the Bouwer and Rice method except that the well intake section locates very close to the bottom of the aquifer. The effect of fitting a straight line to the slug test data is evaluated along with the dimensionless compressibility parameter (${\alpha}$) ranging from 0.001 to 1. A modified linear curve fitting method that is expanded from Chirlin's approach to the case of a partially penetrating well with the basic-time-lag fitting method is introduced. A case study for a compressible glacial till is made to verify the proposed method by comparing with a type curve method (KGS method).