• Distribution Business Review
• /
• no.3
• /
• pp.155-170
• /
• 2003

본 연구는 기본적으로 온라인과 오프라인의 통합마케팅을 절명하고 이에 관한 경험적 사례를 개발하기 위한 목적으로 진행되었다. 앨범서비스 영역의 공생적 기반 위에 전개되는 온 -오프라인의 경험적 사례를 개발하고 바람직한 마케팅방향 방향을 제시하였다. 본 연구는 문헌연구와 사례연구를 병행하여 연구를 진행하였다. 사례는 인터넷 기반의 앨범서비스를 제공하기 위한 (주)와이드스쿨이다. 온-오프라인의 협력적 통합마케팅의 전략을 전개하기 위해서는 무엇보다도 온 -오프라인의 뚜렷한 목표를 절정하고 성장방향에 대한 비전을 공유하고 나아가 온 -오프라인의 사명을 감당하는 것이다. 즉, 실천적으로는 \circled1 항상 고객 (customer)기반의 의사결정을 이루며 \circled2 철저한 협력적 돕는 경쟁(competition) 의식과 \circled3 구성원 자신의 일에 대한 자신감(confidence)을 지니고 \circled4 실천을 위한 용기(courage)를 가지고 \circled4 혁신하여 변화(change)를 선도하는 것이다. 온라인(on line)으로 표현되는 인터넷환경은 모든 영역에 변화를 요구하고 있다. 온라인에 관한 연구는 크게 온라인시장의 경쟁(competition)에 관한 연구와, 온라인 소비자(consumer)에 관한 연구 그리고 온라인 시장 참가기업(company)에 관한 연구로 구분된다(이석규 ; 2001). 이중 기업에 관한 연구의 중심에는 e-biz의 수익모텔에 관한 연구가 주류를 이루고 았다(David et al, 1999) 특히 오프라인기업의 경우 어떠한 형태방법으로 온라인 환경에 부응하며 기존의 마케팅활동과 연계할 것인가는 매우 중요한 문제다. 즉 기존의 오프라인기업이 온라인도구변화에 적응하고 이를 전략적으로 활용하기 위해서는 무엇보다도 오프라인과 온라인의 통합에 관한 형태와 전략 등을 명확히 이해하고 적용하는 것이 중요하다. 개수가 감소하는 것과는 상당히 다른 분포이다. 따라서 우리의 관측 결과는 2001년 사자자리 유성우의 극대 시간 전후 2시간에 적어도 0등급 이하의 밝은 유성이 상대적으로 많이 발생하였을 것으로 해석된다. 이런 밝은 유성의 빈도는 유성우 특성 연구에 중요한 의미를 가진다. 그러나 표준성만을 이용해 결정된 유성 등급은 유성의 지속 시간에 대한 불확실성과 전천 카메라 감응도의 비선형성에 의한 불확실성을 내포하고 있음을 지적해 둔다.umn chromatography)를 사용하였고 일련의 정제 과정을 통하여 배양액 중의 L-lactic acid 정제 수율은 약 85% 정도로 나타났으며 HPLC로 분석한 결과 99.7%의 순도를 확인할 수 있었다.경향을 나타내며 유입휫수와 $Dst_{min}$ 사이에는 높은 상관관계(0.83)가 있었다. 둘째, 주상기간 중 자기폭풍의 크기가 클수록 플럭스 비 ($f_{max}/f_{ave}$는 대체로 증가하는 경향을 나타냈다. 그리고 75~113keV 에너지 채널에서의 $Dst_{min}$ 값과 플럭스 비의 상관계수는 0.74로서 가장 높았으며 나머지 에너지 채널 역시 비교적 높은 상관관계를 나타냈다. 셋째, 주상기간 중 총 에너지 유입률 지수와 $Dst_{min}$ 사이에 높은 상관관계가 확인되었다. 특히 환전류를 구성하는 주요 입자의 에너지 영역(75~l13keV)에서 가장 높은(0.80) 상관계수를 기록했다. 넷째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의 발달과 밀접한 관계가 있음을 시사한다.se that were all low in two aspects, named "the Nonsignificant group".

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.490-496
• /
• 2013

The board using recycled wood waste chip tends to decrease in terms of physical and mechanical properties. The reasons are notably different shape of chips, components of used adhesive and impurity content, which bring the irregular quality and downgrading of board. More over, the board has higher emissivity of formaldehyde than regular board, because recycled chip contains adhesives that were used to make previous products. This low quality of products weakens the price and quality competitiveness, and it led to bringing the issue of problem in Korean board industry. For these reason, in this study, boards using byproducts of plywood were made to evaluate physical and mechanical properties according to manufacturing conditions. As a result, The board was consists of 4~16 mesh chips for core layer and veneer on both face and they were combined using EMDI, and its' bending strength was 57.7 $N/mm^2$ which is 215% higher than that of OSB (26.8 $N/mm^2$). Moreover, the emissivity of formaldehyde was 0.7 ppm, this board seems to substitute OSB for rated sheathing.

• Journal of the Korean Institute of Gas
• /
• v.23 no.4
• /
• pp.46-64
• /
• 2019

Technical practice code, KGS GC101 2018, for explosion hazard area selection and distance calculation of gas facility was enacted and implemented from July 12, 2018. This code includes whole contents of IEC60079-10-1 2015 (Explosive atmospheres Part 10-1: Classification of areas - Explosive gas atmospheres), and clarifies the interpretation of ambiguous standards or adds guidelines for standards. KGS GC101 is a method for classifying explosion hazard place types: (1) Determination of leak grade (2) Determination of leakage hole size (3) Determination of leakage flow (4) Determination of dilution class (5) Determination of ventilation effectiveness, finally (6) Determination of danger place (7) Explosion The range of dangerous places can be estimated. In order to easily calculate this process, the program (KGS-HAC v1.14, C-2018-020632) composed by Visual Basic for Application (Excel) language was produced by Korea Gas Safety Corporation. We will discuss how to use codes and programs to select and set up explosion hazard zones for field users.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.446-452
• /
• 2021

As a higher standard for food consumption is required, the consumption of chicken meat that can satisfy the subdivided food preferences is increasing. In March 2003, the quality criteria for chicken carcasses notified by the Livestock Quality Assessment Service suggested quality grades according to fecal contamination and the size and weight of blood and bruises. On the other hand, it is too difficult for human inspection to qualify mass products, which is key to maintaining consistency for grading thousands of chicken carcasses. This paper proposed the computer vision algorithm as a non-destructive inspection, which can identify chicken carcass parts according to the detailed standards. To inspect the chicken carcasses conveyed at high speed, the image calibration was involved in providing robustness to the side effect of external lighting interference. The separation between chicken and background was achieved by a series of image processing, such as binarization based on Expectation Maximization, Erosion, and Labeling. In terms of shape analysis of chicken carcasses, the features are presented to reveal geometric information. After applying the algorithm to 78 chicken carcass samples, the algorithm was effective in segmenting chicken carcass against a background and analyzing its geometric features.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.1
• /
• pp.10-15
• /
• 2021

'Gwangyoung', a winter forage triticale cultivar (X Triticosecale Wittmack), was developed at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2018. The cultivar 'Gwangyoung' has leaves of wide width, medium length, and green color, and spikes of medium length and yellowish-brown color, and a large grain of yellowish-brown color. The heading date of the cultivar 'Gwangyoung' was April 22 which was similar to check cultivar 'Shinyoung'. Its tolerance or resistance to cold, lodging, wet injury powdery mildew, and leaf rust were also similar to those of the check cultivar. The leaf blade ratio of 'Gwangyoung' (27.5%) was higher than that of 'Shinyoung' (21.2%). The average forage fresh and dry matter yield of cultivar 'Gwangyoung' at milk-ripe stages were 50.0 and 17.6 MT ha-1, respectively, which were higher than those (47.7 and 17.1 MT ha-1) of the check cultivar. The silage quality of 'Gwangyoung' was lower than that of the check cultivar 'Shinyoung' in crude protein content (5.3%) and total digestible nutrients (61.3%), while was higher than the check cultivar in neutral detergent fiber (58.2%) and acid detergent fiber (34.9%). 'Gwangyoung' showed the silage of 1 grade and a grain yield of 6.03 MT ha-1.

• Journal of agriculture & life science
• /
• v.50 no.5
• /
• pp.111-120
• /
• 2016

The objective of this study was to provide basic information for selecting the right timing and the right place of erosion control of stream on Gyeongsangnam-do. In order to achieve this objective, a total of 526 erosion control dams and 230 mountains stream conservation facilities on the constructed places and construction planned places for the erosion control were investigated on site, forest physiognomy, and hydrologic conditions. The erosion control dams and mountain stream conservation facilities were mostly constructed in the area, which has the sedimentary rock, 200-400m of altitude, a slope of 21~30°, and II of landslide hazard map. Among the forest environmental factors, it was only similar to the construction frequency in the areas that have small diameter class, III age class. Also, we investigated the hydrological environmental factors that determine the size and numbers of erosion control dam. The places constructed to the highest frequency were below 50ha in the area, 2.1~4.0km/㎢ of drainage density, longitudinal water system, 61~90mm of maximum precipitation per hour, and 201~300mm of day maximum precipitation. As the results, the sites and floodgate conditions between the constructed places and stream conservation facilities for the erosion control showed to be very similar. Therefore, these results indicate that the erosion control of the stream of the areas, which have the disruption of mountain peaks and the high erosion risk areas, should be used on both the erosion control dam and stream conservation facilities.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.1
• /
• pp.6-11
• /
• 1989

This investigation was conducted to get basic informations on land consolidation works and soil management for arable land. The characteristics of geometrical features of mapping units in the detailed soil maps of Korea were measured from 70 soil series (565 soil phases) by using a picture analysis system. The results obtained were as follows: 1. The mean values of the mapping units in extent, periphery, diameter of long axis and short axis, roundness and number of acute angles were 22.0ha, 2.267m, 911m, 0.104, and 3.5, respectively. It was suggested that "Simplicity Index of Mapping Unit", $=\frac{Extent\;in\;ara}{Length\;of\;boundary\;periphery\;in\;meter}{\times}\frac{1}{number\;of\;acute\;angle}$ be valuable to judge the complexity degrees of mapping units. 2. The size of mapping unit among physiographyic position was shown in order of Alluvial plains > Fluviomarine plains > Terraces > Hills > Fans > Mt. foot slopes > Valleys, and the simplicity index of mapping units also showed similar order of the extent. 3. The size and the simplicity index of the soils developed on plains with silty textured imperfectly drained were higher than the soils developed on sloped land with loamy textured. As the slopes getting steeper or relatively better in soil drainage, the size and the simplicity index became smaller. 4. The relationship between the simplicity index and the size of the farm unit divides by the land consolidation works was positively correlated. And it was concluded that the parcelling of the farm unit divides by the planning of land consolidation should be based on the soil boundaries of the detailed soil maps for mechanized or collaborated farming.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.05a
• /
• pp.135-143
• /
• 2000

The COCOMO Ⅱ model is well-suited for the new software development life cycle such as non-sequential and rapid-development processes. The traditional regression approach based on the least square criterion is the most commonly used technique for empirical calibration in the COCOMO Ⅱ model. But it has a few assumptions frequently violated by software engineering data sets. It is true that the source data is also generally imprecise in reporting size, effort, and cost-driver ratings, particularly across different organizations. And that the outlier for the source data is a peculiarity and indicates a data pint To cope with difficulties, in this paper, we propose a new regression method for calibrating COCOMO Ⅱ post-architecture model based on the minimum relative erro(MRE) criterion. The characteristic of the proposed method is insensitive to the extreme values of the data in the empirical calibration. As the experimental results, It is evident that our proposed calibration method MRE was shown to be superior to the traditional regression approach for model calibration, as illustrated by the values obtained for standard deviation(^σ), and prediction at level L PRED(L) measures.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.165-165
• /
• 2011

내진 설계규정이 적용되기 이전에 시공되어 사용 중인 교량의 경우 지진 발생시 교각의 파괴 또는 구조적 피해는 교량 전체 시스템의 붕괴를 초래하므로 지진하중에 대하여 피해를 최소화해야 한다. 이를 위해 내진설계규정이 적용되기 이전의 교량 또는 지진취약지역으로 분류된 곳의 교량, 사회적 중요도가 높은 교량에 대해 교각의 내진성능보강을 실시하고 있다. 2007년 말 국토해양부가 관리하고 있는 11,940개 교량 중 지진 발생시 피해가 우려되는 1,342개(일반국도 682개, 고속국도 600개) 교량에 대해 2006년부터 내진보강이 착수되었고 2009년에는 확대 추진하여 일반국도 80개교, 고속국도 100개교에 대한 보강을 실시하였다. 이와 같이 확대 추진되고 있는 정책에 반해, 내진보강 기술 및 제품이 부족하고 새로운 내진보강재 개발이 불가피해지고 있는 것이 현실이다. 소성영역에서의 횡방향 철근은 지진 시 종방향 철근의 좌굴과 콘크리트의 압축강도저하를 방지하며, 전단보강철근으로도 중요한 역할을 하여 교각의 전단강도를 증가시킨다. 그러나 이러한 횡방향 철근은 초기 설계에 의한 시공이 종료된 후 기존의 성능을 증가시키기 위하여 철근량을 증가하거나 단면의 변화를 주기에는 매우 어려운 일이다. 따라서 내진성능을 위한 단면력 증가를 위하여 다양한 재료의 보강재와 형식이 사용되고 있다. 본 연구에서는 원형교각 모델의 구조해석을 이용해 내진성능평가를 선행한 후 실험체를 제작, Helical Bar를 보강하여 준정적 실험을 통해 내진보강성능을 평가하였다. 압축설계강도 $f_{ck}=240kgf/cm^2$를 기준으로 교량등급 2등교인 일반적인 도로교의 1/4축소모형을 설계, 기초부는 $1,200{\times}600{\times}600$ (mm)으로 철근과 콘크리트로 구성하였으며, 기둥부는 직경 400mm, 높이 1,250mm 크기의 철근콘크리트 원형 교각 실험체를 제작하였다. 제작된 실험체는 총 3개로, 분류는 무보강 일반 실험체, Helical Bar 직경에 따른 분류, 보강간격에 따른 분류로 나누어진다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.3
• /
• pp.227-235
• /
• 2004

Tunneling in rock mass produces two types of damages in the vicinity of a tunnel: structural and constructional damages. Structural damage represents the damage induced by the unbalance of geostatic stress caused by the tunneling, and constructional damage is the damage produced during the construction. In this study, formulations of tangential and radial stresses in the elastic and plastic zones near a tunnel, and the calculation of radius of plastic zone surrounding a tunnel are introduced by modifying the Hoek-Brown criterion of 2002 edition, which has capability of considering in situ rock mass characteristics and construction damage. From the parametric study, influences of rock mass quality, uniaxial compressive strength of intact rock, and the dimension of the tunnel on the plastic zone are investigated. The accuracy of the proposed approach is evaluated by comparing with results from the previous study.