• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.67-74
• /
• 2023

A large number of concrete structures are built and used around the world. To ensure their safe and continuous use, these structures require constant inspection and maintenance. While man-powered inspection and maintenance techniques are efficient, they can only provide intermittent status checks at the time of on-site inspection. Therefore, there is a growing need for a system that can continuously monitor the condition of the structure. A study was conducted to detect cracks and damage by installing a conductive coating on the surface of a concrete structure. A parallel resistance pattern that can monitor the occurrence and progression of cracks was developed by reflecting the structural characteristics of concrete structure. An empirical study was conducted to veryfy the application of the proposed method. The crack detection pattern was installed on the reinforced concrete beams, and the crack monitoring method was verified through applying a load on the beams.

• Magazine of the Korea Concrete Institute
• /
• v.3 no.2
• /
• pp.77-86
• /
• 1991

철근 콘크리트 부재의 부착거동은 철근 콘크리트 구조물을 역학적 거동을 규명하는데 매우 중요한 요소가 된다. 본 논문에서는 이러한 철근 콘크리트의 부착거동을 서술할 수 있는 이론모델을 유도하여 제시하였다. 본 해석모델은 철근 콘크리트부재의 위치에 따라 다랄지는 국부 부착응력과 부착슬립의 관계를 나타내주고 있으며, 이에 대한 실험결과를 잘 설명하고 있음을 보여주고 있다. 본 부착해석모델은 철근콘크리트 구조물의 좀더 정확한 해석과 설계를 가능케 할 것으로 사료된다.

• Magazine of the Korea Concrete Institute
• /
• v.1 no.1
• /
• pp.87-94
• /
• 1989

철근콘크리트 뼈대구조와 같이 설계변수가 과다하고, 제약조건식이 복잡한 구조물의 최적화를 위하여는 구조물을 여러개의 부분구조물로 분할하여 최적해를 구하는 분할법이 많이 사용되고 있다. 그러나 기존의 분할법에 의한 최적화는 구조해석과정과 고정된 부재력에대한 단면설계변수의 부분최적화 과정만으로 이루어지기 때문에, 최적해를 구하려면 반복적인 재해석과정만을 수행하지 않으면 안된다. 따라서 본 연구에서는 다단계분할법에 의하여 철근콘크리트 뼈대구조의 최적화 문제를 3단계로 형성하고, 분할된 부분최적화문제의 최적화시 전체구조의 강성 및 부재력 변화가 반영되어 부분 구조물의 결합을 유지시킬 수 있는 최적화 알고리즘을 제안하였다. 최적화 문제에서 설계변수로는 단면의 크기, 철근량, 모멘트 재분배율등을 취하고,목적함수는 경비함수, 제약조건으로는 강도설계법에 의한 부재강도, 시방서의 요구사항등을 고려하여 문제를 형성하였다. 본 연구에서 개발한 다단계 최적화과정의 첫째 단계에서는 탄성해석에 의하여 재분배모멘트의 설계공간을 형성한다. 이 때 부재력변화량추정(forece approximation technique)에 의하여 단면치수의 변화에 따른 부재력의 변화를 제약조건식 내에 포함시킬 수 있도록 하였다. 둘째 단면에서는 첫째 단계에서 구한 부재력변화량추정이 포함된 제약조건식 내에서 무제약최소화기법에 의하여 단면치수를 최적화하도록 하였다. 셋째 단계에서는 재분배 모멘트를 최적화하였으며, 이 때 재분배모멘트의 변화에 따른 단면설계 변수의 변화는 둘째 단계에서 구한 설계민감도(design sensitivity)를 이용하여 반영시키도록 하였다. 제안된 알고리즘을 1층 2경간 및 2층 1경간 뼈대구조에 적용하여 알고리즘의 타당성과 효율성을 입증하였다. 따라서 본 연구의 알고리즘은 철근 콘크리트 뼈대구조의 최적설계에 안정성있게 적용할 수 있을 것으로 판단된다.

• Journal of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.541-550
• /
• 2011

Many researches have been performed on concrete with fly ash and bottom ash. However researches on concrete with pond ash (PA) and its application to RC (Reinforced Concrete) structure are limitedly carried out. This paper presents an applicability of PA concrete in construction of real size structure. Referring to the previous study, 2 domestic PA samples with normal performance are selected and 2 replacement ratios (25% and 50%) to fine aggregate are considered for 5 PA concrete structures consisting of column, slab, and wall. In order to evaluate the property of fresh concrete, several tests including air content, slump, and setting time are performed. Using cored out samples from hardened PA concrete structure, tests for strength, resistance to carbonation and chloride penetration are carried out and compared with control samples. Additionally, tests for rebound hardness, drying shrinkage, and hydration heat are performed for PA concrete structure. The test results showed that PA concrete has reasonable strength and durability performances compared to those of normal concrete. Therefore, its potential application to RC structure is promising. The PA aggregate can be more actively used for RC structures with better quality control for content of fly ash, bottom ash, and unburned carbon.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.4
• /
• pp.141-148
• /
• 2005

The nonlinear humidity distribution occurs due to the moisture diffusion when a concrete is exposed to an ambient air. This nonlinear humidity distribution induces shrinkage cracks on surfaces of the concrete. Because shrinkage cracks largely affect the durability and serviceability of concrete structures, the moisture diffusion in concrete must be investigated. The purpose of this paper is to propose a model of the moisture diffusion coefficient that governs moisture diffusion within concrete structures. To propose the model, numerical analysis was performed with several experiments. Because the moisture diffusion coefficient is changed with aging, especially at early ages, the proposed model includes aging effect by terms of the porosity as well as the humidity of concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.3-4
• /
• 2009

This study predicts the structural behavior of RC beams using high strength shear reinforcement and evaluates current design codes restricting the strength of shear reinforcement steel. Under the present design codes, the yield strength of shear reinforcement steel is restricted to 400MPa. In case that use high yield strength reinforcement steel, could incure heavily crack and deflection at the members of structure, and have not verified ductility capacity, fatigue resisting capacity, shear and torsion resisting capacity, anchoring capacity and seismic capacity. To this end, we evaluate structural behavior of reinforced concrete beams using high strength shear reinforcement.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.2
• /
• pp.85-92
• /
• 2007

In 1980s, a number of bridges with bare concrete deck were constructed on the Korea highway. After 20 years service, many bare concrete decks are still in good condition without special maintenance activity. Therefore, the application of the bare concrete deck is being reestimated from the view of construction and maintenance. As a part of the program, the characteristic of penetration(surface chloride and apparent diffusion coefficient) of de-icing salt into bare concrete bridge deck was analyzed in order to predict the service life of bridge on Korea highway.

• Magazine of the Korea Concrete Institute
• /
• v.4 no.1
• /
• pp.135-145
• /
• 1992

With the increasing tendency to construct high rise reinforced concrete building~i, it is required to use high strength materIals, smaller member sections, and larger reinforcing bars, I t is generally recognized that under severe seismic loads beam column jomts may become more critical structural components than other structural elements. In a ductile momentresistmg reinforced concrete frame, the connection of bearncolumn must be capable of resistll1g the large lateral forces caused by seismic actions, The purpose of this experimental study is to evaluate and ll1vestigate the earthquake resistant perform ance of beam-colurrm subassemblies constructed with high-strength concrete cast by the concrete of com¬pressive strength of 700kg / cm2 subjected to reversed cyclic loadings. New approaches for moving the plastic hinging zone away from the column face and preventing the di¬agonal crack in the joint region are adopted to advance the earthquake-resistant performance of beam-column subassemblies using high-strengh concrete under severe earthquake-type loading. Exper¬imental results indicate that the modified new details which are introduced by intermediate reinforcement in the beam over a specific beam length adjacent to the joint are able to attain the stable hysteretic behavior and the enhancement of earthquake-resistant performance. Keywords: high strength concrete: beam-column Joints; seirnic loads(reversed cyclic loading) : earth¬quake-resistant performance; plastic hinge zone: diagonal crack: intermediate reinforce¬ment ; closed strirrup: hysteretic behavior: enhancement .

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.6
• /
• pp.191-197
• /
• 2006

This study is to establish a standardization of injection system by inorganic material for crack repair of tunnel concrete structures. For this various surveys and experiments were carried out as followed. The first we surveyed capability of injection and crack pattern of concrete structures in site. and second we analyzed the relationship between crack width and volume of injection, and decided pressure and volume of injection. Finally we evaluated the relationship between crack width and volume of injection with kind of concrete structures, and between required time for injection and crack width with thickness of structure. From these surveys and experiments, we cleared the relationship between crack patterns and injection technologies such as volume, pressure of injection and required time for injection with kind of structure.

• Magazine of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.64-70
• /
• 2002

도시 주민생활에 없어서는 안될 주요한 사회간접자본시설로서 하수도, 하수도처리시설 등의 콘크리트 구조물에 대한 부식열화는 현재 세계 각국에서 급속히 진행되고 있다. 콘크리트 구조물이 반영구적이라는 것으로 인식되어 있으나, 실제로는 사용수명이 급속히 단축되어, 특히 콘크리트가 처해있는 환경 중에 황화수소(H$_2$S) 등의 황산화합물이 다량으로 존재하고 있는 환경에서는 하수관 콘크리트의 부식에 의해 도로가 함몰되는 사례도 보도되는 등 시민생활에 큰 위험성을 동반하는 가능성을 배제할 수 없다.(중략)