• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.2
• /
• pp.15-23
• /
• 2019

High temperature superconducting (HTS) generators for wind power systems are attractively researched with the advantages of high efficiency and smaller size compared with conventional generator. However, the HTS generators have high Lorentz force problem, which acts on HTS field coils due to their high current density and magnetic field. This paper deals with characteristic analysis of the modularized HTS field coil for a 750 kW superconducting wind power generator according to field coil structure. The modularized HTS field coil structure was designed based on the electromagnetic and mechanical analysis results obtained using a 3D finite element method. The electromagnetic force of the module coil was also analyzed. As a result, the perpendicular and maximum magnetic fields of the HTS coils were 2.5 T and 3.9 T, respectively. The maximum stress of the supports was less than the allowable stress of the glass-fiber reinforced plastic material, and displacement was within the acceptable range. The design specifications and the results of the HTS module coil structure can be effectively utilized to develop large-scale superconducting wind power generators.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.147-155
• /
• 2005

In this paper, we propose that three uniform coplanar waveguides(CPWs), such as a conventional, finite grounded(FG), and grounded(G) CPWs, can be coupled with a $TE_{01{\delta}}$ mode dielectric resonator(DR) for a parallel resonant characteristic as a microstrip line coupled with the DR. Coupling characteristics have been investigated by placing the DR on a dielectric support above the CPWs and by moving the DR away from the center of a slot of the CPWs to the ground plane. FEM simulation(HFSS) results in terms of S-parameters agree well with measurement results. Finally, unloaded Q values of the DR coupled with the three uniform CPWs are compared with those of the DR coupled with a microstrip line. The comparison shows that the DR coupled with the three CPWs has higher unloaded Qs than that coupled with a microstrip line and that the GCPW case has the highest unloaded Qs.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.571-577
• /
• 2018

Bicycle riders complain of many inconveniences when wearing glasses, sunglasses and masks. The disposable fine dust mask has been developed to resolve such inconveniences of bicycle riders. The scope of research is limited to the fiber which generates one-time static electricity and the shape of the mask due to the characteristic of fine dust mask. The purpose is to design and make the fine dust mask with a simple production process. The new disposable fine dust mask has secured enough space of the mask in front of the mouth by longitudinal folding and minimized stuffiness by maintaining the shape of the folded part to prevent touching the mouth even by heavy breathing. The streamlined sponge is attached at the part of nose support and the area of the cheek has been expanded to be about 2.5cm wider than ordinary masks to improve tight seal at the side. In addition, a new disposable fine dust scarf mask has been developed to block ultraviolet rays for the face and neck while filtering fine dust with the tight fine dust mask.

• Journal of Industrial Convergence
• /
• v.20 no.6
• /
• pp.83-92
• /
• 2022

This study is to investigate the factors affecting post-traumatic stress disorder (PTSD) symptoms among hospital nurses during the COVID-19 pandemic in Korea. Cross-sectional, descriptive design is used in this study. Data collection was completed through an online self-administered survey from December 2020 to January 2021 among 180 registered nurses dealing with COVID-19 patients at hospitals. This survey includes socio-demographic questions, including a 22-item PTSD questionnaire, a 14-item type D personality questionnaire, a 25-item resilience questionnaire, and a 23-item Social Support Scale questionnaire. 56.1% of the subjects in this study were at risk of PTSD. In the high-risk group for PTSD, resilience and social support were lower than those in the low-risk group for PTSD. But there was no statistically significant difference in both variables (resilience t=0.21, p=.836, social support t=1.07, p=.287). However, education (OR = 2.23, p= .041) and type D personality (OR = 3.67, p < .001) were significant factors for PTSD symptoms. The results of the study can be utilized to recognize PTSD in nurses by identifying factors influencing PTSD during epidemics such as COVID-19, and to apply management systems such as psychological programs to help overcome them.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.359-367
• /
• 2009

This study was conducted to provide useful information for the scientific training of spikes and instruction, by analyzing all kinematical variants including time, distance, velocity, angle factors in spike movements of volleyball matches. The subjects were 4 foreigner players, who participated in the V-League of 2008-2009. The conclusion from this study is as follows. Time for a jumping step was .33s, and Angelko had a bit longer takeoff time than other players. In Angelko and Anderson who were leading in attack power, the whole distance of a spike motion was relatively short, less than 4m. The moment when the center of gravity reached the lowest point was when the right foot bearing weight in the jumping step was passing the left foot, and the highest point of gravity was 2.30m, which appeared just before the impact. The horizontal speed of the center of the gravity was highest as 4.19m/s at the beginning of a jumping step, and lowest at the stance phase of the fore foot just before takeoff. The vertical speed of the center of the gravity was lowest after the right foot touched the ground, and highest after the takeoff of the fore foot. Impact was 3.22m, and the highest ball speed was 28.18m/s.