• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.7
• /
• pp.643-651
• /
• 2011

An experimental study on the failure of aluminum sandwich joints under shear loading was conducted. A total of 60 specimens including three different insert types and two different potting types were fabricated and tested. The test results showed that the through-clearance type of joint fails at the highest load among insert type joints. The failure load of the potted joints with the dimple washer increased by 10% compared to the simple potted joints. As expected, the shear failure load became higher in accordance with the face thickness increase. It was also found that the upper face in contact with the loading tool is more dominant over the failure load.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.3
• /
• pp.80-85
• /
• 2008

Capsule endoscopes generally use primary cells as a power source due to its limited space. However, the primary cells have several limitations such as high cost, limited power and no reuse. To solve these problems, a new wireless energy transmission method is proposed. The proposed approach uses air-gap transformer concepts and LC resonance to transmit energy from transmitter(primary side) to capsule endoscopes(secondary side). The ferrite core with 3-axis winding is used to increase energy transfer efficiency regardless of direction and location. The experimental results show that the proposed method stably supplies 30mW power to secondary circuit.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.7
• /
• pp.354-360
• /
• 2008

Power-related issues have become important considerations in current generation microprocessor design. One of these issues is that of elevated on-chip temperatures. This has an adverse effect on cooling cost and, if not addressed suitably, on chip reliability. In this paper we investigate the general trade-offs between temporal and spatial hot spot mitigation schemes and thermal time constants, workload variations and microprocessor power distributions. By leveraging spatial and temporal heat slacks, our schemes enable lowering of on-chip unit temperatures by changing the workload in a timely manner with Operating System (OS) and existing hardware support.

• Journal of KIISE
• /
• v.43 no.2
• /
• pp.186-195
• /
• 2016

This paper proposes a vehicle license plate detection method in real road environments using 8 bit-MCT features and a landmark-based Adaboost method. The proposed method allows identification of the potential license plate region, and generates a saliency map that presents the license plate's location probability based on the Adaboost classification score. The candidate regions whose scores are higher than the given threshold are chosen from the saliency map. Each candidate region is adjusted by the local image variance and verified by the SVM and the histograms of the 8bit-MCT features. The proposed method achieves a detection accuracy of 85% from various road images in Korea and Europe.

• Journal of Korean Association for Spatial Structures
• /
• v.5 no.3 s.17
• /
• pp.101-107
• /
• 2005

An analytic study on the bond stress between steel tube and concrete in concrete filled steel(CFT) tublar column is presented in this paper. Recently buildings need members which are enhanced durability and ductility. Concrete filled tublar column system is proposed as alternative plan. In this paper, ABAQUS/Standard Version 5.8 which is identified as usefulness for finite element analysis and has various element library is used. The variables in this study are the location and type of shear-connector. The modeling ell contact problem practiced by Contact Pair and Contact Pressure method. In the step of physical bond, it is practiced by Change friction option. After yielding of models, analytic results is less than that of experimental results.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.2 s.24
• /
• pp.83-90
• /
• 2007

Buildings become high and large. CFT(Concrete Filled steel Tube) columns have been developed to manage effectively that loads which columns support and cross sections of columns are increased. Because CFT column is the composite structure made of two different materials, many researches have been performed to look into mechanical behaviors. This study is an analytic study about bond stress on interface between concrete core and steel tube in circular and rectangular CFT columns. ABAQUS/Standard Version 5.8 is used to analyze bond stress by bond form and position of shear-connector, and improved analystic method about mechanical characters on interface is suggested.

• The KIPS Transactions:PartC
• /
• v.13C no.7 s.110
• /
• pp.905-912
• /
• 2006

Depending on the location of the rendezvous point (RP), the network efficiency is determined in the core based tree (CBT) or protocol independent multicast-sparse mode (PIM-5M) multicasting protocol to provide the multicast services based on the shared tree. In this paper, a new algorithm to allocate the RP using the estimated values of the total cost and the size(number of entries) of the routing tables is proposed for efficiently controlling the cost and the number of routing table entries. The numerical results show that the proposed algorithm reduces the total cost in 5.37%, and the size of routing tables in 13.35% as compared to the previous algorithm.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.595-597
• /
• 2005

현재 IP 멀티캐스트의 도입의 지연으로, 기존의 유니캐스트 망 기반 멀티캐스트의 필요성이 대두되어 오버레이(Overlay) 멀티캐스트 관련 연구가 진행 중이다. 특히, 확장성 제공과 작은 오버헤드 등으로 효율적인 CBT(Core Based Trees) 기반의 오버레이 멀티캐스트에 대한 연구가 활발히 진행 중이다. 그러나 기존의 거리 매트릭(Metric) 기반의 CBT로 오버레이 트리를 구성하는 경우, 특정 라우터에 패킷이 집중되는 현상으로 인하여 혼잡이 발생하여 멀티캐스트 성능 저하뿐만 아니라 네트워크 전체 성능을 저하시킬 수 있다. 본 논문에서는 이를 해결칠기 위하여. 코어 노드를 기준으로 이웃하는 두 노드 간의 패킷 중계 방향성을 계산하는 알고리즘을 제안하고. 이 결과값을 이용하는 새로운 매트릭 기반의 CBT를 구성하고자 한다. 실험 결과, CBT 상의 자식 위치에 있는 종단 노드로 패킷을 중계하는 과정에서 중복되는 패킷 전송 경로를 최소화하여 CBT를 구성함으로써 특정 라우터에 집중되는 트래픽을 줄이거나 다른 라우터로 트래픽을 분산함으로써 혼잡 발생 가능을 낮추어 보다 안정적인 통신을 기대할 수 있다.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.1
• /
• pp.17-24
• /
• 2022

Currently, the construction trend of high-rise structures is changing from a cube-shaped box to a free-form. In the case of free-form structures, it is difficult to predict the behavior of the structure because it induces torsional deformation due to inclined columns and the eccentricity of the structure by the horizontal load. For this reason, it is essential to review the stability by considering the design variables at the design stage. In this paper, the position of the weak vertical member was analyzed by analyzing the behavior of the structure according to the change in the core position of the twisted high-rise structures. In the case of the shear wall, the shear force was found to be high in the order of proximity to the center of gravity of each floor of the structure. In the case of the column, the component force was generated by the axial force of the outermost beam, so the bending moment was concentrated on the inner column with no inclination.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.1065-1071
• /
• 2023

In this paper discuss with research developing an LSTM model for classifying the behavior of occupants within a residence. The multi-sensor consists of an IAQ (Indoor Air Quality) sensor that measures indoor air quality, a UWB radar that tracks occupancy detection and location, and a Piezo sensor to measure occupants' biometric information, and collects occupant behavior data such as going out, staying, cooking, cleaning, exercise, and sleep by constructed an experimental environment similar to the actual residential environment. After the data with removed outliers and missing, the LSTM model is used to calculate accuracy, sensitivity, specificity of the occupant behavior classification model, T1 score.