• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.359-364
• /
• 2003

We propose a novel vertical directional coupler with polarization independent very short coupling lengths using the double-sided deep-ridge waveguide structure which could be implemented using double-sided process to polarization insensitive deep-ridge waveguide structures and investigate the effect of various structure parameters on the coupling length. Variation of coupling length for the variation of the waveguide width is smaller than that for the variation of the core thickness. Coupling length decreases as the inner cladding layer thickness and the core thickness decrease. The waveguide width with the polarization independent coupling length decreases as the inner cladding layer thickness decreases for the same core thickness and the core thickness decreases for the same inner cladding layer thickness.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.12-16
• /
• 2004

We show that the extinction ratio is improved using slight asymmetry in two core refractive indices of polarization independent very short vertical directional couplers with the double-sided deep-ridge (DSDR) waveguide structure. The optimum asymmetry with the maximum extinction ratio and the tolerance of the refractive index of core with the extinction ratio larger 1ha]1 30 ㏈ increase as the thickness of inner cladding layer and the two cores decrease due to the increase of the coupling strength between the two cores. Also, the device length and the tolerance of the device length with the extinction ratio larger than 30 ㏈ decrease as the thickness of the inner cladding layer and the two cores decrease due to the increase of the coupling strength between the two cores. We show that polarization independent vertical directional couplers with the DSDR waveguide structure with the device length less than 100 ${\mu}{\textrm}{m}$ and the extinction ratio larger than 30 ㏈ could be implemented.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.293-298
• /
• 2004

We investigate the effect of the wing width and thickness of a Double-Sided Deep-Ridge(DSDR) vertical directional coupler on the coupling length dependent on the polarization, We have found that the DSDR vertical directional coupler without a wing does not have polarization independent coupling lengths. The variation of the coupling length of TE and TM modes and the difference between the coupling lengths of the two modes are negligible as the wing width increases beyond the specific wing width for the same wing thickness. Thus, we can see that a DSDR vertical directional coupler has a wing width larger than the minimum wing width to obtain the polarization independent coupling length. The minimum wing width increases as the wing thickness increases for the same core thickness and as the core thickness decreases for the same wing width. Also, we have found that the minimum wing thickness is determined by the core thickness and the minimum wing thickness decreases as the core thickness increases.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.2
• /
• pp.73-79
• /
• 2014

The sandwich shell with Egg-box core has been used for the combustion chamber case of air breathing propulsion system. The alteration on pitch length and thickness of Egg-box core was required to be lighter and save manufacturing time and cost of combustion chamber case. In this paper, the finite element analysis method which simulated bending test was used to predict the equivalent shear modulus which affect structural stability of sandwich shell in short time. The result of FE calculation on sandwich panel with homogeneous material, H130-foam core, showed a good agreement with the values available in the reference. The equivalent shear modulus of Egg-box core according to the variation of pitch length and thickness can be obtained.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.599-602
• /
• 2014

FPGA상에 AES 복호화 코어를 FIPS-197사양에 기술된 AES 알고리즘의 복호화부분을 구현하였다. 키값의 길이는 128/192/256비트를 지원하며, 별도의 코어 로직은 FPGA의 6-input lookup table의 이점을 살리도록 설계되었으며, 이결과로 2000개의 lookup table만을 이용하여 256비트 키에서 3Gbps의 처리가 가능하게 되었다. 코어는 난수 및 FIPS-197, SP-800a와 AESAVS사양의 테스트 벡터를 통해서 검증하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.1-10
• /
• 2011

In designing multi-core processors, interconnection delay is one of the major constraints in performance improvement. To solve this problem, the 3-dimensional integration technology has been adopted in designing multi-core processors. The 3D multi-core architecture can reduce the physical wire length by stacking cores vertically, leading to reduced interconnection delay and reduced power consumption. However, the power density of 3D multi-core architecture is increased significantly compared to the traditional 2D multi-core architecture, resulting in the increased temperature of the processor. In this paper, the floorplan methods which change the forms of vertical placement of the core and the level-2 cache are analyzed to solve the thermal problems in 3D multi-core processors. According to the experimental results, it is an effective way to reduce the temperature in the processor that the core and the level-2 cache are stacked adjacently. Compared to the floorplan where cores are stacked adjacently to each other, the floorplan where the core is stacked adjacently to the level-2 cache can reduce the temperature by 22% in the case of 4-layers, and by 13% in the case of 2-layers.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.433-435
• /
• 2008

본 연구에서는 MR 유체를 특징으로 하는 대시포트형 마운트를 제안하고, 자극 형상의 변화가 MR유체 마운트의 감쇠력에 미치는 영향에 대하여 고찰하였다. 제안된 MR유체 마운트의 코어부에 발생하는 자기 특성에 대하여 살펴보기 위하여 자극(Magnetic pole)의 유효길이와 코어 중심부의 구조를 달리하여 대시포트를 제작하였다. 등가자기회로를 이용한 대략적인 계산방법에 의한 결과 자극의 유효길이가 증가할수록 자기저항은 감소하는 경향을 나타내지만, 그 밖의 설계인자들의 영향은 작게 나타났다. 상용해석프로그램을 이용하여 등가자기회로 결과와 비교를 하였으며, 대시포트 마운트를 제작하여 자극의 유효길이 변화에 대한 감쇠력의 변화를 실험적으로 비교하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.240-241
• /
• 2007

연자성 분말의 독특한 특성은 3D 등방성 강자성체 이며, 이 때문에 3차원적 자속(flux)를 활용할 수 있어 전기 강판(sillicon steel)에 비해 3차원 성형시 유리한 장점을 가지고 있다는 점이다.[1] 따라서 본 논문에서는 연자성 분말 (Soft Magnetic Composites)의 3차원 성형시 각 성형 형태에 따른 압분 시료의 전기적, 기계적 특성에 대한 연구를 하였다. 연자성 분말의 코어 형상을 크게 ' '형으로 구분하여 압분 코어를 만든 후 압분 코어의 Overhang 각도 및 코어 Teeth의 길이에 따른 파라미터에 변화를 주어 철손 및 경도, 밀도를 측정 하였다. 이 논문에서 우리는 3차원 코어 성형시 전기적, 기계적 특성이 가장 우수한 코어 성형 조건을 연구해 낼 수 있었다.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.800-806
• /
• 2013

The purpose of this study was to evaluate the marginal fitnesses on the effect of span length of bridge and the marginal gaps within the clinically allowed range. The samples were fabricated with zirconia core using CAD/CAM system. The test groups were divided by four groups, single crown, 2-units bridge, 3-units bridge and 4-units bridge and 10 zirconia cores per each group. The results of mean marginal gaps were $42.95{\pm}6.93{\mu}m$ in the single crown, $43.53{\pm}5.27{\mu}m$ in 2-unit, $53.43{\pm}13.38{\mu}m$ in 3-unit, and $50.85{\pm}8.25{\mu}m$ in 4-unit on each. The marginal gap of mesial and distal surfaces were statistically significant differences between single, 2-unit group and 3-unit, 4-unit group (p<.05) and this results was effected by the span length. The buccal and lingual surfaces were no statistically significant differences within all groups(p>.05). From this results the span length of the zirconia core may have influence on marginal fitness and the marginal gaps were within the clinically allowed range.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.205-212
• /
• 2010

This paper describes a core generator (FCore_Gen) which generates Verilog-HDL models of 640 different FFT/IFFT cores with selected parameter value for OFDM-based communication systems. The generated FFT/IFFT cores are based on in-place single memory architecture and use a hybrid structure of radix-4 and radix-2 DIF algorithm to accommodate various FFT lengths. To achieve both memory reduction and the improved SQNR, a conditional scaling technique is adopted, which conditionally scales the intermediate results of each computational stage. The cores synthesized with a $0.35-{\mu}m$ CMOS standard cell library can operate with 75-MHz@3.3-V, and a 8,192-point FFT can be computed m $762.7-{\mu}s$, thus the cores satisfy the specifications of wireless LAN, DMB, and DVB systems.