• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.57-63
• /
• 1993

Spectrophotometric determination of cobalt by flow injection method is described. 2-(5-Bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino) aniline rapidly forms a water-soluble complex with cobalt in $NH_3-NH_4Cl$ buffer solution at pH 10.5. The absorption maxima of this complex is at 545 nm with molar absorptivity of $58000L\;mol^{-1}\;cm^{-1}$. The calibration curve of cobalt is linear over the range of 0.1 to 0.6ppm and the detection limit is 25ppb. The relative standard deviation is ${\pm}0.72%$ for 0.5ppm and the sampling rate is $60samples\;hr^{-1}$. The interfering effect of some cations and anions was investigated. Ni(II), Cu(II), Fe(III) and $CN^-$ interfered severely. The interfering effect of these matallic ions could be decreased by adding $1.0{\times}10^{-3}M$ EDTA solution to the carrier stream.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.60.2-60
• /
• 2002

• Journal of Radiation Protection and Research
• /
• v.10 no.1
• /
• pp.3-13
• /
• 1985

The sorption behavior of some typical fission products such as Cs-137, long-lived radionuclide; Ce-144, rare-earth element; and Co-60, corrosion product on zeolite A, zeolite F-9 (faujasite) and amorphous zeolite was determined with the salt concentrations, 0.01 M- to 2.0 M- nitric acid and ammonium nitrate, and the shaking time, 15 minutes interval from 15 minute to 90 minute. Kd values were obtained through the batch experiment. In conclusion, the optimal conditions for isolation and removal of the typical radionuclides are as following: zeolite, amorphous zeolite; concentration, $0.01\;M-HNO_3\;and\;0.1\;M-NH_4NO_3$; pH4; shaking time, one hour; the most effective species, Cs-137.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.404-409
• /
• 2018

The integration of organic and inorganic building blocks into hierarchical porous architectures makes potentially desirable catalytic material in many catalytic applications due to their combination of dissimilar components and well-constructed reactant transport path. In this study, we prepared the hierarchical porous $Co_3O_4@graphene$ 3D gel by hydrothermal method to achieve high catalytic performance in PET glycolysis reaction. Obtained $Co_3O_4@graphene$ 3D gel consisted of interconnected networks of $Co_3O_4$ and graphene sheets, providing large number of accessible active sites for efficient catalytic reaction. These structural merits from synergistic effect of $Co_3O_4$ and graphene gave a high performance in the PET degradation reaction giving high conversion yield of BHET, fast degradation rate of PET, and remarkable stability.

• Radiation Oncology Journal
• /
• v.11 no.2
• /
• pp.449-454
• /
• 1993

The skin sparing effect associated with high energy x-ray or gamma ray beams may be reduce or lost under certain conditions of treatment. Current trends in using large fields. Shield carrying trays, compensating filters, and isocentric methods of treatment have posed problems of increased skin dose which sometimes become a limiting factor in giving adquate tumor doses. We used the shallow ion chamber to measure the phantom surface dose and the physical treatment variables for Co-60 gamma ray, 4MV and 10 MV x-ray beam. The dependence of percent surface dose on field sizes, atomic number of the shielding tray materials and its distance from the surface for 4, 10MV x-rays and Co-60 gamma ray is qualitatively similar. The use of 2 mm thick tin filter is recommended for situations where a low atomic number tray is introduced into the beam at distances less than 15 cm from the surface and with the large field sized for 4 MV x-ray beam. In case of Co-60 gamma ray, the lead glass tray is suitable for enhancement of skin sparing. Also, the filter distance should be as large as possible to achieve substantial skin sparing.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.25-31
• /
• 2021

Smelting reduction of spent lithium-ion batteries results in the production of metallic alloys in which reduced cobalt, nickel and copper coexist. In this study, we investigated the leaching of the metallic alloys containing the above three metals together with iron, manganese, and silicon. The mixture of hydrochloric acid and hydrogen peroxide as an oxidizing agent was employed, and the effect of the concentration thereof, the reaction time and temperature, and pulp density was investigated to accomplish the complete leaching of cobalt, nickel, and copper. The effect of the hydrogen peroxide concentration and pulp density on the leaching was prominent, compared to that of reaction time and temperature, especially in the range of 20 to 80℃. The complete leaching of the metals present in metallic alloys, except silicon, was accomplished using 2 M HCl and 5% H₂O₂ with a pulp density of 30 g/L for 150 min at 60℃.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1976.10a
• /
• pp.187.2-187
• /
• 1976

시판 고추가루에서 미생물을 분리하여 세균 5종과 곰팡이 13종을 동정하였고 코발트-60 감마선에 대한 이들 균주의 치사율 (D$_{10}$ 값)을 조사하였다. 또한 고추가루에 0-1,000 krad의 감마선을 처리하고 저장중 미생물의 증식여부를 관찰한 결과 세균의 발육감소를 가져왔다.

• Resources Recycling
• /
• v.19 no.5
• /
• pp.25-30
• /
• 2010

Leaching of CMSX-4 superalloy was done in hydrochloric acid solutions. The leaching behaviors of main alloy components, such as Ni, Co, Cr, Al, was investigated by controlling acid concentration, temperature, leaching time and pulp density. Increasing acid concentration enhanced the leaching rate till the rate decreased over 3 M acid concentration. Raising temperature increased the leaching amount of the metal components. After the leaching for 60 minutes at $90^{\circ}C$ and 10 g/L pulp density in 4 M acid solution, 93.2% nickel, 89.9% aluminum, 80.4% cobalt, and 79.1% chromium were leached. Nickel and aluminum were preferentially leached out, while the leaching rate of cobalt and chromium were relatively high only after 60 minutes, Increasing pulp density lowered the leaching rate and especially serious on cobalt and chromium, The optimum leaching condition for CMSX-4 was obtained at $90^{\circ}C$, 120 minutes, and less than 125 g/L in 4 M hydrochloric acid solution.

• Resources Recycling
• /
• v.19 no.4
• /
• pp.41-50
• /
• 2010

A fundamental study was carried out to develop a process for recycling tungsten and cobalt from WC-Co hardmetal sludge generated in the manufacturing process of hardmetal tools. The complete extraction of cobalt and simultaneous formation of tungstic was achieved by treating the sludge using aqua regia. The effect of aqua regia concentration, reaction temperature and time, pulp density on cobalt leaching and tungstic acid formation was investigated. The complete leaching of cobalt was attained at the optimum conditions: 100 vol.% aqua regia concentration, $100^{\circ}C$ temperature, 60 min. reaction time and 400 g/L pulp density. A complete conversion of tungsten carbide of the sludge to tungstic acid was however, obtained at the pulp densities lower than 150 g/L under the above condition. The progress of reaction during the aqua regia treatment of the sludge was monitored through the XRD phase identification of the residue. The metallic impurities in the tungstic acid so produced could be further removed as insoluble residues by dissolving the tungsten values in ammonia solution. The ammonium paratungstate($(NH_4)_{10}{\cdot}H_2W_{12}O_{42}{\cdot}4H_2O$) of 99.85% purity was prepared from the ammonium polytungstate solution by the evaporation crystallization method.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.1
• /
• pp.77-84
• /
• 2024

Four children's cosmetic sets were purchased online, labeled for use from 4 years of age, and 81 components of each were analyzed for lead, cadmium, arsenic, antimony, nickel, cobalt, copper, chromium, and mercury by inductive coupled plasma - mass spectrometry (ICP - MS). The average metal concentrations were as follows: 0.82 ㎍/g for lead, 0.03 ㎍/g for cadmium, 0.97 ㎍/g for arsenic, 0.52 ㎍/g for antimony, 2.32 ㎍/g for nickel and 0.01 ㎍/g for mercury which was lower than the acceptable standards for all products. Higher mean values of lead, antimony, cobalt, and copper were detected in imported than domestic products (p < 0.05). There was a statistically significant difference in the average values of heavy metals according to the type of cosmetics (p < 0.05), with eyeshadow showing the highest mean values of arsenic 2.47 ㎍/g, nickel 6.36 ㎍/g, and chromium 11.06 ㎍/g. and the highest mean concentrations were 1.20 ㎍/g for lead, 1.17 ㎍/g for antimony, and 23.60 ㎍/g for copper in blusher. The levels of cobalt in the 81 children's cosmetics were ND ~ 5.23 ㎍/g, copper were ND ~ 379.61 ㎍/g, and chromium were detected ND ~ 36.95 ㎍/g, respectively. Brown colored cosmetics had the highest mean concentrations of nickel and cobalt. Purple-colored cosmetics had the highest mean concentration of lead and chromium.