• Journal of the Korean Chemical Society
• /
• v.47 no.6
• /
• pp.667-670
• /
• 2003

• Resources Recycling
• /
• v.19 no.4
• /
• pp.29-34
• /
• 2010

Distribution diagram of $CoCl_2$ and $MnCl_2$ was obtained by analyzing ionic equilibria of the two metals in HCl solution. In the HCl concentration range of 4 and 10 M, most of cobalt exists as $CoCl_2$, whereas Mn exists $MnCl_{3}^-$ and $MnCl_2$. Extraction isotherm of Co(II) and Mn(II) was calculated by using the equilibrium constant for the solvent extraction of the two metals by Alamine336. Although the equilibrium constant for the solvent extraction of Mn was higher than that of Co, extraction isotherm indicated that cobalt could be extracted more efficiently than manganese at the same initial extraction conditions.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.21-28
• /
• 2022

The smelting reduction of spent lithium-ion batteries results in metallic alloys of cobalt, nickel, and copper. To develop a process to separate the metallic alloys, leaching of the metallic mixtures of these three metals with H₂SO₄ solution containing 3% H₂O₂ dissolved all the cobalt and nickel, together with 9.6% of the copper. Cyanex 301 selectively extracted Cu(II) from the leaching solution, and copper ions were completely stripped with 30% aqua regia. Selective extraction of Co(II) from a Cu(II)-free raffinate was possible using the ionic liquid ALi-SCN. Three-stage cross-current stripping of the loaded ALi-SCN by a 15% NH₃ solution resulted in the complete stripping of Co(II). A process was proposed to separate the three metal ions from the sulfuric acid leaching solutions of metallic mixtures by employing solvent extraction.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.3
• /
• pp.183-189
• /
• 2010

It is of importance to separate Ni(II) and Co(II) from Mg(II) in solution which was leached from nickel laterite ore. In order to investigate the possibility of separating Ni(II) and Co(II) from Mg(II), adsorption behavior of the three metals from individual and mixed sulfate solutions was investigated by using Diphonix resin. The concentration of each metal in solution was fixed at 100 ppm and the pH of the sulfuric acid solution was changed from 5 to 7. At ambient temperature, the adsorption behavior of the three metal ions followed Langmuir adsorption isotherm. The loading capacity of Diphonix resin for the three metal ions was obtained from the Langmuir isotherm. Since adsorption behavior of the three metal ions from the mixed solution was similar to each other, it was found to be difficult to separate Ni(II) and Co(II) from Mg(II) by using Diphonix resin.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.341-345
• /
• 2011

The Schiff base cobalt(II) complex, bis[4-chloro-2-((E)-(isopropylimino) methyl) phenol]cobalt(II), has been prepared and characterized by single-crystal X-ray diffraction analyses. The phenomenological, kinetic and mechanistic aspects of the cobalt (II) complex have been studied by TG/DTG techniques. On the basis of the experimental data, the kinetic parameters such as activation energy, pre-exponential factor and entropy of activation were computed, and then the most probable mechanism function was estimated as $g({\alpha})={\alpha}^2$ 2. Hence the rate controlling process at all stages of decomposition is onedimensional diffusion (Parabolic model).

• Resources Recycling
• /
• v.29 no.5
• /
• pp.55-63
• /
• 2020

In order to investigate the separation of Co(II) and Ni(II) by ionic liquids from weak hydrochloric acid solutions, extraction experiments were performed by changing the type and concentration of ionic liquids and the initial pH of the aqueous phase. Two kinds of ionic liquids based on Aliquat 336 were employed in this work; one was synthesized by reacting organophosphorus acids(D2EHPA, PC88A, Cyanex 272, Cyanex 301) with Aliquat 336 and the other was prepared by exchanging the chloride ion of Aliquat 336 with SCN^-. The three types of ionic liquids (ALi-D2, ALi-PC, and ALi-CY272) showed better extraction of Co(II) than Ni(II), and the equilibrium pH was higher than the initial pH. In the case of ALi-CY301, the selectivity of Co(II) and Ni(II) depended on the extraction conditions. In addition, the effect of the addition of TBP to the ionic liquid on the extraction of two metals was also investigated. Employment of ALi-SCN as an extractant resulted in selective extraction of Co(II) and complete separation of the two metal ions was possible.

• Journal of the Korean Chemical Society
• /
• v.19 no.6
• /
• pp.463-467
• /
• 1975

The polymerization of methyl methacrylate(MMA) initiated by cobalt (II) nitrate in tetrahydrofuran (THF) has been studied. From the results of kinetic studies, the overall polymerization rate (Rp) could be expressed as following; $R_p=k\;[cobalt(Ⅱ)\;nitrate]^{0.5}\;[MMA]^{1.5}$ By considering the effects of chelating agent on the polymerization rate, it could be assumed that the monomer, MMA might form a coordination complex with cobalt(II) nitrate. In the presence of radical inhibitor hydroquinone, the inhibition time was observed. And the apparent overall activation energy was calculated to be 14.0 kcal/mole.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.189-198
• /
• 2011

In the present paper two new thiosemicarbazones i.e., 4[N-(4'-ethylbenzalidene)amino]antipyrine thiosemicarbazone (EBAAPTS) and 4[N-(2',4'-dimethylbenzalidene)amino]antipyrine thiosemicarbazone (DMBAAPTS) have been synthesized and characterized. The complexing abilities of these thiosemicarbazones i.e. EBAAPTS and DMBAAPTS towards cobalt(II) and nickel(II) salts have been explored. The reactions of the hot ethanolic solutions of cobalt(II) and nickel(II) salts with EBAAPTS and DMBAAPTS led to the formation of the novel complexes of general composition [$MX_2(L)H_2O$] (M=$Co^{2+}$ or $Ni^{2+}$; X=$Cl^-$, $Br^-$, $NO_3^-$, $NCS^-$ or $CH_3COO^-$; L=EBAAPTS or DMBAAPTS). The newly synthesized complexes have been characterized by elemental analyses, molar mass, molar conductance, magnetic susceptibility, infrared and electronic spectral studies. The molar conductance measurements of the complexes in nitrobenzene correspond to their non-electrolytic nature. All the complexes are of high-spin type. On the basis of spectral studies an octahedral geometry has been assigned for Co(II) and Ni(II) complexes of the type [$MX_2(L)H_2O$]. These complexes were screened for their antibacterial and antifungal activities on different species of pathogens, fungi and bacteria and their biopotency has been discussed.

• Journal of the Korean Chemical Society
• /
• v.53 no.1
• /
• pp.17-26
• /
• 2009

Hydrazones of isonicotinic acid hydrazide, viz., N-isonicotinamido-furfuralaldimine (INH-FFL), N-isonicotnamido-cinnamalidine (INH-CIN) and N-isonicotnamido-3',4',5'-trimethoxybenzaldimine (INH-TMB) were prepared by reacting isonicotinic acid hydrazide with respective aromatic aldehydes, i.e., furfural, cinnamaldehyde or 3,4,5-trimethoxy-benzaldehyde. A new series of fifteen complexes of cobalt(II) with these new hydrazones, INH-FFL, INH-CIN and INH-TMB, were synthesized by their reaction with cobalt(II) salts. The infrared spectral data reveal that hydrazone ligands behave as a bidentate ligand with N, O donor sequence towards the $Co^{2+}$ ion. The complexes were characterized on the basis of elemental analysis, magnetic susceptibility, conductivity, infrared and electronic spectral measurements. Analytical data reveal that the complexes have general composition [Co($L)_2X_2]\;and\;[Co(L)_3](ClO_4)_2$ where L= INH-FFL, INH-CIN or INH-TMB and X = $Cl^-,{NO_3}-,\;NCS^-\;or\;CH_3COO^-.$ The thermal behaviour of the complexes were studied using thermogravimetrictechnique. Electronic spectral results and magnetic susceptibility measurements are consistent with the adoption of a six-coordinate geometry for the cobalt(II) chelates. The antimicrobial properties of cobalt(II) complexes and few standard drugs have revealed that the complexes have very moderate antibacterial activities.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.73-80
• /
• 2020

In order to develop a process for the recovery of valuable metals from spent LiBs, solvent extraction experiments were performed to separate Cu(II) and/or Co(II) from synthetic hydrochloric acid solutions containing Li(I), Mn(II), and Ni(II). Commercial amines (Alamine 336 and Aliquat 336) were employed and the extraction behavior of the metals was investigated as a function of the concentration of HCl and extractants. The results indicate that HCl concentration affected remarkably the extraction efficiency of the metals. Only Cu(II) was selectively at 1 M HCl concentration, while both Co(II) and Cu(II) was extracted by the amines when HCl concentration was higher than 5 M, leaving the other metal ions in the raffinate. Therefore, it was possible to selectively extract either Cu(II) or Co(II)/Cu(II) by adjusting the HCl concentration.