• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.729-732
• /
• 2010

The present study has been motivated by the development of a reliable numerical methodology for simulation of kerosene/LOx coaxial swirl injectors. To deal with thermodynamic non-ideality and anomalies of transport properties pronounced at supercritical pressures, a set of subroutine libraries has been constructed based on the cubic equations of state, and applied to an existing flamelet analysis code. For computational efficiency, two-dimensional axisymmetric RANS formulation with swirl was adopted and validated successfully against an isothermal coaxial swirling jet. For the actual problem with high pressure combustion, however, numerical results show that the RANS models yield excessive production of turbulence probably due to high density gradient magnitude in the vicinity of mixing layer of swirling film flow, and imply strongly further improvement of the turbulence models.

• Journal of Convergence Society for SMB
• /
• v.3 no.2
• /
• pp.9-17
• /
• 2013

Android applications market has increased rapidly due to the popularity of smart phones. In order to high competitiveness in the application market should be high productivity, reduce cost. And short development cycle is required because of increased the android applications demand. Owing to develop applications in short time, the requirements analysis, design process are able to omitted. But in the case of reuse application at development phase, involved many problems because omit document or design. so target of this paper is android application source code that omit document or design. we propose architecture recovery techniques from android application source code by reverse engineering with identify functions are reused. We expect that increase productivity and reduce development cost, smooth maintain by proposed technique.

• Journal of Radiation Protection and Research
• /
• v.28 no.2
• /
• pp.79-85
• /
• 2003

This study was intended to estimate Hp(10) recommended by the ICRU using the $CaSO_4:Dy,P$ element developed in the KAERI. For the estimation of Hp(10), TL response should be compensated properly through the energy range using filter materials since $CaSO_4:Dy,P$ is of severe photon energy dependent response. Various experiments and computations using Monte Carlo Code were carried out for designing filter satisfying the performance requirements of the ISO related to TL dosimeter. Under the completed filter, the relative response of $CaSO_4:Dy,P$ showed $0.75{\sim}1.0$ for photons in the range of $20{\sim}662keV$. Especially it was possible to reduce the thickness of front filter and simplify the filter combination with rear filter of larger diameter and to considerably improve angular dependence by introducing taper to the filler.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.4
• /
• pp.20-29
• /
• 2014

As construction projects increase their complexity, variety, and scale, various recognition applications (such as RFID, bar-code etc.) have been tried for managing material effectively in construction projects. However, existing recognition applications for construction material management have some limitations that cause additional works (such as attaching RFID tag), additional cost (labor cost, recognition device cost, etc.), and cognitive impairment of workers. Therefore, this study proposed a character recognition technology as an alternative of previous recognition technologies such as RFID, bar-code, etc. The technical feasibility of proposed technology was validated by three recognition tests. Additionally, this study proposed code the structure to manage materials using the character recognition technology. The effects of character recognition technology are presented by comparing with existing RFID-based logistics processes.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1519-1529
• /
• 1992

A stepped specimen which is subjected to step loading is modeled to study the initiation and growth of adiabatic shear band using explicit time integration finite element code. The material model for specimen includes effects of thermal softening, strain hardening and strain rate hardening. Various mesh sizes are tested to check whether they are small enough to model highly localized discontinuous phenomena reasonably well. It is shown that the number of adiabatic shear band depends on impact velocity and it is also shown that the initiation and growth of adiabatic shear band inversely depends on prescribed velocity at the top of specimen.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.270-273
• /
• 1999

Y2k will be able to enormous disaster. The many make an effort to find a solution to problem of Y2k. Problem of Y2k must solution to as follow. First, problem of Y2k solution organization must constructed. Second, in step with each stage-the first, developing and complete stage, stage of Y2k solution must be constructed. Third, solution of Y2k must construct to hierarchy. hierarchy structure constructed form six stage to first stage, first stage is investigation resources, second stage is estimation influence, third stage is planing conversion, fourth stage is working conversion, fifte spot, sixth stage is diffusion on the spot.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.5
• /
• pp.598-606
• /
• 2002

We suggest a distributed communication and management methodology using PC to PC Query multicasting strategy for efficient management of medical images produced by DICOM(Digital Imaging and Communications in Medicine) Modalities. It is absolutely necessary to reduce strict degradation of PACS system due to large sire of medical images and their very high transport rates. DICOM PC to PC Component is composed of a Service Manager to execute requested queries, a Communication Manager to take charge of file transmission, and a DICOM Manager to manage stored data and system behavior Each Manager itself is a component to search for requested file by interaction or to transmit the file to other PCs. Distributed management and transformation of medical information based on PC to PC Query multicasting methodology will enhance performance of central server and network capacity, reducing overload on both. We organize three major components for system operation. Each component is implemented as Agent. Communication between agents uses XML encoded Agent Communication Language.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.443-443
• /
• 2012

최근 지구 온난화 및 기후변화로 인하여 국지적 집중호우에 의한 농지 침수 및 유실 피해가 점차 증가 추세에 있으며 가뭄에 의한 물 부족 현상도 심화되고 있다. 이와 같은 홍수 및 가뭄 피해에 대비하기 위하여 농업용 저수지와 수문 그리고 농수로와 같은 농업수리시설물이 신축 운영되고 있으나 이들 시설물은 비교적 규모가 작은 대신에 그 수가 매우 많고 또한 지역적으로 널리 산재해 있기 때문에 관리자가 이들을 효율적으로 운영하고 관리하는데 한계가 있다는 특징이 있다. 더욱이 이들 시설물은 물과 항상 접하는 철근 콘크리트 구조물로 이루어져 있어서 시간이 경과함에 따라 균열발생과 철근부식과 같은 노후화 현상이 뚜렷하게 진전되어 정기적 안전점검이 필요한 실정이다. 이에 따라 농업수리시설을 보다 체계적으로 관리하고 농업용수를 보다 효율적으로 확보 운영하기 위하여 물관리 자동화 사업이 추진되어 많은 개선이 이루어졌으나 아직까지 현장업무가 관리자의 수작업에 의존하고 있으며 농촌 용수의 정확한 정보가 제때에 제공되지 못하는 등 농업수리시설에 대한 다양한 요구를 충족시키지 못하고 있다. 따라서, 농촌수자원의 효율적 관리를 위하여 농업수리시설 가운데 하나인 농수로의 수위 및 유량 정보를 자동으로 측정하며 농업수리시설물의 상태 정보를 입력하고 관리할 수 있는 모바일 App을 개발하였다. 안드로이드 OS 기반의 스마트폰을 활용하였으며 여기에는 시설물 고유정보가 포함된 QR코드 및 Active 태그를 통하여 시설물의 상태정보를 원격에 있는 서버 컴퓨터로 전송할 수 있는 원거리 무선통신 모듈이 구비되어 있다. 특히, 농업수리시설물 관리 어플리케이션은 현장관리자가 기존에 수기방식으로 시설물을 관리해 오던 것을 휴대단말 상에서 보다 효율적으로 관리를 함으로써 시설물 유지관리 업무의 효율성을 향상시키는 특징이 있다.

• Korean Journal of Microbiology
• /
• v.38 no.3
• /
• pp.173-179
• /
• 2002

The functions of riboflavin synthesis genes ( ribI,II,III and IV) found immediately downstream of luxG in the lux operon from Photobacterium species were identified using the biochemical and genetical analysis. The ribI-III gene codes for protein corresponding to that coded by the second (riboflavin synthase), third (3,4-dihydroxy 2-butanone 4-phosphate synthase/GTP cyclohydrolase II) and fourth (lumazine synthase) gene, respectively, of Bacillus subtilis rib operon with the respective gene procuct sharing 41-50% amino acid sequence identity. Unexpectedly, the sequence of the ribIV product of Photobacterium phosphoreum does not correspond in sequence to the protein encoded by the fifth rib gene of Bacillus subtilis. Instead the gene (ribIV) codes for a polypeptide similar in sequence to GTP cyclohydrolase II of Escherichia coli and the carboxy terminal domain of the third rib gene from Bacillus subtilis. Complementation of Escherichia coli riboflavin auxotrophs showed that the function of the gene products of ribII and ribIV are DHBP synthase and GTP cyclohydrolase II, respectively. In addition the experiment, showing that increase in thermal stability of riboflavin synthase coded by ribIon coexpression with ribIII, provided indirect evidence that the latter gene codes for lumazine synthase.

• Journal of KIISE
• /
• v.42 no.8
• /
• pp.1022-1030
• /
• 2015

The context-awareness of mobile applications yields several issues for testing, since mobile applications should be able to be tested in any environment and under any contextual input. In previous studies of testing for Android applications as an event-driven system, many researchers have focused on using generated test cases considering only Graphical User Interface (GUI) events. However, it is difficult to find failures that could be detected when considering the changes in the context in which applications run. It is even more important to consider various contexts since the mobile applications adapt and use the new features and sensors of mobile devices. In this paper, we provide a method of systematically generating various executing contexts from permissions. By referring to the lists of permissions, the resources used by the applications for running Android applications can be easily inferred. To evaluate the efficiency of our testing method, we applied the method on two open source projects and showed that it contributes to improve the statement code coverage.