• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.2
• /
• pp.179-186
• /
• 2017

Because facial asymmetry is caused by various causes, the cause analysis is important and quantitative index is needed to the evaluation. In this study, we applied the Nottingham Grading System that was used as a quantitative index to evaluate the facial paralysis by tracking the markers through the image processing and calculating the distance between the markers with images obtained by using the webcam, to evaluate facial asymmetry. The existing Nottingham Grading System has a problem of causing a measurement error in the specific case because the left and right are compared by summing the distance change between the feature points of the face part according to the change of the facial expression. We compared the case of the facial asymmetry and case of normal subject by using the existing Nottingham Grading System and the improved Nottingham grading system. In the existing Nottingham Grading System, case of facial asymmetry and case of facial symmetry were 99.0% and 95.0% respectively in the normal range, but the improved Nottingham Grading System showed facial asymmetry case was 74.0% and facial symmetrical case was 93.2%. The results of experiment show that the improved Nottingham Grading System allows detailed evaluation of each site and improved the problem of the Nottingham Grading System for specific cases.

• Journal of Life Science
• /
• v.26 no.9
• /
• pp.999-1006
• /
• 2016

This paper studies an infection of norovirus and astrovirus in outbreaks in Korea. In March 2016, gastroenteritis outbreaks occurred in Busan. 522 students of three departments at university D had meeting at a restaurant near the university. Some of them had symptom such as diarrhea, vomiting. Epidemiological, laboratory and environmental investigations were performed to identify the agents of the outbreaks. Fecal specimens were collected from 35 students and 7 food handlers to identify causative viral agents. Norovirus genogroup GI and GII were detected from diarrhea patients. Astrovirus was also detected from some of them. In particular, these outbreaks were the first occurrence associated with astrovirus in Busan. Total of 42 samples were collected, and 24 samples resulted in positive to norovirus (16 cases) and astrovirus (8 cases). To identify the molecular genetic information of norovirus, we carried out sequences analysis of the detected strains. Norovirus genotypes were classified into GI.3, GI.4, GII.4, GII.13, GII.17 and GII.21. Astrovirus genotypes were seven astrovirus type 5 and one astrovirus type 2. We performed environmental investigation about water at the kitchen, but norovirus and astrovirus were not detected. The statistical analysis was conducted to evaluate the association between illness and risk factors. The results of this study may contribute to accumulate more the epidemiological data and develop the public health and hygiene.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.489-494
• /
• 2015

This research focused on minimizing the response of fixed cylindrical offshore structures to a ship impact considering the seawater fluid part. A collision between a ship and offshore structure is generally a complex problem and it is often impractical to perform rigorous finite element analyses to include all the effects and sequences during the collision. The structural behavior of a fixed cylindrical type offshore substructure with a seawater fluid part has a simpler response and small deformation due to the dissipation of impact energy. Upon applying the impact force of a ship to the cylindrical structure, the maximum acceleration, internal energy, and plastic strain are calculated for each load cases using Ls-dyna finite element software. In the maximum cases 2.0 m/s velocity, the response result for the structure was carried out to compare between having a fluid region and no fluid region. Fluid-structure interaction analysis was performed using the ALE method, which make it possible to apply a fluid region on the impact problem. The case of a fixed cylindrical type offshore structure without a seawater fluid part can be a more conservative design.

• Investigative Magnetic Resonance Imaging
• /
• v.17 no.3
• /
• pp.200-206
• /
• 2013

Purpose : To assess the effect of applying an automated heart model based measurements of left ventricle (LV) and compare with manual and semi-automated measurements at Cardiovascular MR Imaging. Materials and Methods: Sixty-two patients who underwent cardiac 1.5T MR imaging were included. Steady state free precession cine images of 20 phases per cardiac cycle were obtained in short axis views and both 2-chamber and 4-chamber views. Epicardial and endocardial contours were drawn in manual, automated, and semi-automated ways. Based on these acquired contour sets, the end-diastolic (ED) and end-systolic (ES) volumes, ejection fraction (EF), systolic volume (SV) and LV mass were calculated and compared. Results: In EDV and ESV, the differences among three measurement methods were not statistically significant (P = .399 and .145, respectively). However, in EF, SV, and LV mass, the differences were statistically significant (P=.001, <001, <001, respectively) and the measured value from automated method tend to be consistently higher than the values from other two methods. Conclusion: An automatic heart model-based method grossly overestimate EF, SV and LV mass compared with manual or semi-automated methods. Even though the method saves a considerable amount of efforts, further manual adjustment should be considered in critical clinical cases.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.1
• /
• pp.1-14
• /
• 2020

The main purpose of this research was to develop upcycled DIY kits made from subway billboard material to make living products. This study was conducted based on the following four stages of design process: research and analyses, DIY kits' design direction establishment, completion of DIY kits, and implementation and evaluation. Through this study, we developed DIY kits for pouches, tissue cases and pencil cases. In the implementation and evaluating stage, we chose to make pouches because it includes zipper attachment process. Implementation was conducted by recruiting four high school students and four female adults. As a result, we found the following: First, the participants were able to make pouches in less than an hour. Second, pouch making has a moderate degree of difficulty. Third, video instructions should be slowed down. Forth, materials need to be improved. Fifth, environmental awareness was improved by using unfamiliar subway billboard materials. The upcycled DIY kits, developed as a result of this study, can be used as eco-friendly education sources for secondary school students as well as for adults' healing hobby.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5C
• /
• pp.429-436
• /
• 2012

In this paper, an RFID system for the automatic preparation system of positron emission tomography (PET) radiopharmaceuticals is developed. Since the preparation system uses radioactive isotope, the preparation system is generally placed in lead-shielded hot-cell. Disposable cassettes including tubes and valves are used in the preparation system, since they are easily contaminated by radioactivity during preparation of radiopharmaceuticals. Currently, a system for preventing re-use of the cassette and managing the information about the preparation precess and result independently from the PC which control the preparation system is highly required for preventing danger from the radiation accident. Since RFID can store and re-write relatively large amount of information, it is suitable for the purpose. However, it is hard to read multiple cassettes' information using antennas installed on the metallic surfaces with current RFID systems. For the problem, we improve RFID system in two directions. First, the interface of the RFID reader is changed then it is possible that multiple readers can be daisy-chained. Also, antenna is tuned while inserting in a metallic coated antenna case, then the effect from the metallic surface of the preparation system is minimized. The test result using the developed system shows that the developed RFID system can read multiple tags using the antennas which are attached on the metallic surface.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.255-258
• /
• 2000

본 연구는 육성돈에 있어 인분해효소인 phytase의 첨가가 환경친화성사료개발을 위한 기초자료로 사용하기 위해 영양소 이용률을 측정하였다. 대조구는 옥수수-대두박의 육성돈 사료이고, 처리구는 대조구 사료에 Phytase의 첨가 수준을 500 unit 및 1,000 unit을 첨가한 구로 3×3 Latin Square 방법으로 실시하였다. 건물과 질소에 대한 소화율에서는 각 처리구간에 유의적인 차이가 없었다(P>0.05). 회분, 칼슘 및 인의 소화율의 경우 phytase 첨가구가 대조구에 비해 높은 수준을 보였다(P<0.05). 돼지가 섭취한 인의 양은 phytase 첨가구가 대조구에 비해 증가하였다. 또한 인의 흡수량에서 phytase 첨가구가 대조구에 비해 높았다(P<0.05) 분과 뇨의 총 인 배설량은 유의적인 차이를 나타내지 않았다. 칼슘의 섭취량은 처리구가 대조구에 비해 높았다. 칼슘의 분 배설량은 각 처리구간에 별 다른 차이를 보이지 않았으나(P>0.05), 뇨의 배설량은 처리구가 대조구보다 적은 양이 배설되었다. 소화된 아미노산 중 cystine, isoleucine, tyrosine, phenylalanine은 처리구가 대조구에 비해 소화율이 현저히 증가된 것을 알 수 있었다(P<0.05). Asparagine, threonine, serine, methionine, leucine의 경우 phytase를 500 unit 첨가한 구가 높은 소화율을 나타내었다(P<0.05). 한편 lysine, histidine, arginine 등의 다른 아미노산은 처리구가 대조구보다 약간의 소화율 증가를 보였으나 통계적 유의차는 나타나지 않았다(P>0.05). 결론적으로 인분해효소 phytase를 사료내 첨가하므로서 분중 영양소를 줄일 수 있는 환경친화성 사료를 개발 가능하다고 사료된다. 체결홈이 형성된 체결부를 갖는 안경집과 이것에 결합되는 체결구가 마련되어 개폐되는 커버가 형성된 케이스로 구성된다.로 금형설계 및 제작기간을 단축하고자 한다.ere demonstrated in rats after i.c.v., intraperitoneally and orally administration, respectively. The antiepileptical effects by the combination of compounds from ginseng; were compared with the iuluence of Rg1, Rb1, Rc and with the well known antiepileptical drugs such as carbamazepine, valproic acid. The base for the research is obtained by using the WAG/Rij strain (Luijtelaar, Coenen, Kuznetcova), an excellent genetic model for human generalized absence epilepsy. The improving action of gensinosides was effectively demonstrated on the model of electrical kindling of amygdala of WAG/Rij rats with genetically determined absences, and the influences of ginsenosides on the slow wave discharges have also been being investigated. The different characteristics of a kindling process exerted in the sex-dif

• The KIPS Transactions:PartA
• /
• v.12A no.6 s.96
• /
• pp.523-530
• /
• 2005

When a PCI 2.2 bus master requests data using Memory Read command, a target device may hold PCI bus without data to be transferred for long time because a target device needs time to prepare data infernally. Because the usage efficiency of the PCI bus and the data transfer efficiency are decreased due to this situation, the PCI specification recommends to use the Delayed Transaction mechanism to improve the system performance. But the mechanism cann't fully improve performance because a target device doesn't know the exact size of prefetched data. In the previous work, we propose a new method called Prefetch Request when a bus master intends to read data from the target device. In this paper, we design PCI 2.2 controller and local device that support the proposed method. The designed PCI 2.2 controller has simple local interface and it is used to convert the PCI protocol into the local protocol. So the typical users, who don't know the PCI protocol, can easily design the PCI target device using the proposed PCI controller. We propose the basic behavioral verification, hardware design verification, and random test verification to verify the designed hardware. We also build the test bench and define assembler instructions. And we propose random testing environment, which consist of reference model, random generator ,and compare engine, to efficiently verify corner case. This verification environment is excellent to find error which is not detected by general test vector. Also, the simulation under the proposed test environment shows that the proposed method has the higher data transfer efficiency than the Delayed Transaction about $9\%$.

• Journal of Broadcast Engineering
• /
• v.23 no.2
• /
• pp.246-252
• /
• 2018

Hand gestures are attracting attention as a NUI (Natural User Interface) of wearable devices such as smart glasses. Recently, to support efficient media consumption in IoT (Internet of Things) and wearable environments, the standardization of IoMT (Internet of Media Things) is in the progress in MPEG. In IoMT, it is assumed that hand gesture detection and recognition are performed on a separate device, and thus provides an interoperable interface between these modules. Meanwhile, deep learning based hand gesture recognition techniques have been recently actively studied to improve the recognition performance. In this paper, we propose a method of hand gesture recognition based on CNN (Convolutional Neural Network) for various applications such as media consumption in wearable devices which is one of the use cases of IoMT. The proposed method detects hand contour from stereo images acquisitioned by smart glasses using depth information and color information, constructs data sets to learn CNN, and then recognizes gestures from input hand contour images. Experimental results show that the proposed method achieves the average 95% hand gesture recognition rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3071-3080
• /
• 2015

The increased demand on the transport of both passengers and goods through rail systems implies higher traffic intensity and congestion on the railways, resulting in greater likelihood of accidents and also degraded passenger services. To cope with the issues, development of an integrated communication network for rails has attracted great deal of attention lately. GSM-R is such an example developed in Europe, which seems to have restrictions in providing various communication services due to network speed limit. For the reason, an LTE-based approach is under study in Korea. After the network development, operation management of the network is necessary. Design of operation management systems has been studied little and thus is the objective of this paper. To do so, a conceptual design has been carried out based on model-based approach. Specifically, a context model has first been created using the use case diagram. Then, SysML models of operational scenarios were developed for the management system. The SysML models have alternatively been expressed as EFFBD models to simulate and verify them. Consequently, the result of the conceptual system design for the operation management of the integrated wireless network is expected to be used as a basis for the detailed design later.