• Journal of Veterinary Clinics
• /
• v.32 no.5
• /
• pp.440-444
• /
• 2015

The purpose of this case report was to present the treatment of continuous renal replacement therapy (CRRT) in dogs with end-stage CKD with uncontrolled uremia. Hemodialysis were carried out 6 patients who failed to improve clinical status with conventional management for CKD. Four dogs with urea reduction ratio (URR) range of 57-72% and 1 dog with URR of 37.3% showed good outcome with decreasing tendency of pre-dialysis Therefore, we suggest that CRRT could be recommended for use in CKD dogs with uncontrolled azotemia or uremia and should be monitor carefully throughout the CRRT.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.771-776
• /
• 2020

In this study, the flexural/shear behavior characteristics of perfobond FRP-concrete composite beams using an FRP plate with perforated webs as formwork and reinforcement are analyzed through an analytical method. Compared with the existing experimental results, we have proved its usefulness and use it in future practice. When the nonlinearity is very large in this case, the nonlinear finite element analysis by an explicit method will be effective. The concrete damage plasticity (CDP) model adopted in this study is considered to be able to adequately simulate the nonlinear behavior of concrete, and the determination of several variable factors required in the model is compared with the experimental results and values used in the study. This recommendation will require review and adjustment for more diverse cases. The effect of the perfobond of the composite beam with perforated web is considered to be somewhat effective in terms of securing the initial stiffness, but in the case of the apex, it is considered that the cross-sectional loss and the effect of improving the bonding force should be properly arranged. The contact problem, such as slipping of the FRP plate and concrete, is considered to be one of the reasons that the initial stiffness is slightly larger than the test result, and the slightly difference from the experimental results is attributed to the separation problem between concrete and FRP after the peak.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.375-386
• /
• 2008

Recently, development paradigm of information system is turning into object oriented and component based, and this methodology is leading the software industry. To acclimatize aptly to this trend, users demand the assessment of software expenses to change with the appropriate model of computing costs of the environment, and some people are actually studying the concept of Object Oriented Function Point and UCP method. Especially, Object Oriented Function Point Measurement Process has good points in overcoming the bound of LOC and the existing the Function Point Measurement Process because Object Oriented Function Point Measurement Process is applicable to the early stage of development project mainly with the used cases, and valid to the life long period as the each stage of software products develops, and always understandable to communicate with users by the UML mark rules. Accordingly, this research is to measure Functional Point at ROFP and AOFP in accordance with the development project of information system by the national defense CBD methodology procedures and UML Interrelation Analysis that are recently and widely used in the developmental environment of object oriented information system. Furthermore, this study suggests the measurement method to obtain Functional Point, and identifies service function and object/class function in the correlation analysis of use case and class based on the products and UML modeling via traditional FPA model and object oriented FPA model. Above all, this study is to demonstrate the improvement of traditional Function Point Measurement Process, IFPUG-CPM and software cost basis, and reveal Function Point Measurement Process, which is appropriate to the development of object oriented information system, and suggest the evaluation results of the compatibility through case studies.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.101-101
• /
• 2011

현재 국내에서 시행되고 있는 '4대강 살리기 사업'은 하천에서 발생하는 홍수 및 가뭄재해방지를 위한 다양한 공학적 노력을 시도하고 있다. 특히 안정적인 수위 및 유량확보와 홍수방지를 위한 보(weir)가 4대강 유역에 16개 설치되고 있다. 이러한 보 구간에는 고정보와 가동보가 복합적으로 설치되고 있으며 가동보는 그 형상과 운영방식에 따라 다양한 설계방안이 적용되었다. '4대강 살리기 사업' 중 낙동강 23공구의 강정보 공사 구간에는 원호형태의 측면 형상을 갖는 라이징 섹터게이트(Rising sector gate)가 적용되었다. 라이징 섹터게이트는 구조물의 높이가 낮고 수문의 개폐장치가 수문피어 구조물 내에 설치되어 경관이 우수하며, 구조가 간단하여 비체와 수류의 안정성이 뛰어나기 때문에 4개의 공사구간에 적용되었다. 따라서 본 연구에서는 강정보의 가동보 구간 2문 중 1문을 1/100 축척으로 제작하여 가변경사 개수로에 설치하고, 홍수 빈도별 상류 유량 조건과 하류단 수위조건으로 케이스를 정하여 실험을 수행하였다. 본 실험에서 사용한 개수로 장치는 너비 0.6 m, 높이 0.8 m, 그리고 길이 15.0 m(측정가능 구간, 헤드탱크와 테일게이트 부제외)의 개수로 실험장치이다. 측부는 모두 강화유리로 되어 육안관찰 및 계측 시 용이하게 제작되었으며, 순환식 유량 공급장치를 구축하여 수로의 하부에 설치된 유량탱크로부터 계속적으로 순환하도록 설계되었다. 또한 수로 하단으로부터 상단방향으로 약 33 m 지점에 전동 유압식 Jack screw 2기가 설치되어 경사도를 조절할 수 있도록 제작되었다. 유량조절용 판넬의 제어기판에는 디지털 경사계가 설치되어 있기 때문에 보다 정확한 경사도의 조절이 가능하다. 보 모형의 총연장은 53 cm이며 폭은 45 cm이다. 섹터게이트의 게이트부분은 직경 15 cm로 설계하였다. 문주부분을 포함한 모든 모형은 아크릴로 제작하며 레이저의 주사를 방해하지 않으며 투과율을 최대로 할 수 있도록 고강도의 아크릴을 가장 얇게 하여 중공형태를 채택하였다. 실험조건은 우선 보의 운영방안에 따라 게이트의 4가지 개방도를 설정하였고, 특히 평수위조건에서는 보의 상류부에 퇴적된 퇴적물의 세척을 위한 flushing 운영개방도 포함되어 있다. 홍수시에 대한 유량조건은 2년 빈도에 해당하는 유량을 수문의 비율과 상사법칙에 따라 설정하였으며 하류단 수위조건도 동일한 조건에 대한 값을 채택하여 적용하였다. 유동장의 해석을 위해서는 비접촉식 계측방법인 PIV(Particle Image Velocimetry) 시스템을 채택하여 2차원(x-z 방향) laser sheet를 생성하고 주입된 particle에서 반사된 변위(displacement) 정보를 상호상관(cross-correlation)기법으로 유동장을 계산하였다. 또한 수리모형과 동일한 지형격자를 구축하여 3차원 CFD 프로그램인 FLOW-3D로 계산하여 결과를 비교하였다. 특히 flushing 운영방안에 대한 게이트부의 개방도를 세가지(30, 45, $60^{\circ}$)로 구분하여 모의하였고, 적절한 개방도를 제안하고자 하였다. 실험결과는 우선 4가지 운영방안에 대한 가동보 주변에서의 유속장을 파악하였고, 최대유속의 발생위치의 변화를 확인할 수 있었다. 그리고 이에 따른 보의 바닥에서 최대유속이 발생할 경우, 하상보호공 위치와 거리 등에 대해서 분석하였다. 이를 통해 가동보 운영에 따른 다양한 유속구조를 파악할 수 있게 되며 구조적 안정성 확보를 위한 검증자료로 활용될 수 있을 것으로 예상된다. 향후, 가동보 운영방안 중 수세효과(flushing effect)에 대한 효과분석을 위해 게이트부 상류구간에 적절한 입경과 비중의 퇴적물질을 설치하는 연구와 상류부에서의 유입유사농도 및 시간변화에 따른 퇴적에 관한 연구를 수행할 계획이다.

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.3-14
• /
• 2018

For satisfying consumer needs, commercial facilities require a variety of sale-related space expressions and eye-catching product arrangements; space composition can also be a direct marketing strategy. The human eye is the sensory organ that acquires the largest amount of information, and an analysis of visual information helps in understanding visual relations between . However, the existing studies are mostly focused on analysis of still frames in experimental images, and there is a lack of studies analyzing gaze information based on mobile images of commercial spaces. Therefore, this study analyzed emotional responses through gaze information of space users in reality using a video of a movement route through a commercial facility. The analysis targeted straight sections of the moving route; based on the data acquired, sectional characteristics of five gaze intensity ranges were examined. As a result, section A, the starting point of the route, had a low gaze intensity, while section B had the highest gaze intensity. This indicates that, starting in section B, the subjects explored the space in a stable way and needed time to adapt to the experimental video. In relation to space characteristics of the gaze-concentrated area, display formats of the right stores in 4 of 6 sections received greater attention. The gaze of consumers was mostly focused on props, and big gaze information was revealed in showcase display formats of the stores. In conclusion, this analysis method can provide highly useful direct design data about merchandise display and merchandise component arrangement based on consumer visual preference.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.19-24
• /
• 2020

The interest in renewable energy is increasing due to the depletion of fossil fuels. In particular, active research on wave power, which is highly predictable and abundant, is being conducted. The coaxial accelerator-type wave power generator used in this study was designed to improve the power generation efficiency by converting bidirectional linear motion into a rotational force. In an offshore engineering basin, waves were generated, and case tests were performed according to the wave period and wave height. The experimental results were verified by the theoretical method related to the frequency response, and the overall trend was confirmed to be consistent. These results are expected to be useful in estimating the power of wave generators and designing parameters to improve the efficiency of wave energy in the design stage before manufacturing. In addition, the manufacturer can predict the wave energy efficiency of wave generators, which can reduce the development time and cost by preventing trial and error processes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.672-680
• /
• 2018

The opening angle of the duct cap assembly during the operation of a refrigerator ice dispenser was evaluated by transient structural analysis, and an improved design to maximize the opening angle was obtained. The opening angle of the existing design was found to be 78% of the upper limit. Several design modifications were proposed and analyzed to examine the effects of the design factors on the opening angle. As a result of the design modifications, the opening angle was improved by changing the lever material to a material with a high elastic modulus, moving the position of the support to the motor side, or increasing the lever shaft diameter. Considering the manufacturing cost of the new design, the design modification changing only the lever material was found to be the best because it does not require a change in the structure of the ice dispenser case. In conclusion, the opening angle can be improved by up to 95% of the upper limit value if the lever material is changed to an aluminum alloy. The methods and results presented in this study were found to be of great help in designing the duct cap assembly structure to facilitate the discharge of ice.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.187-192
• /
• 2000

The objective of this study was to investigate the problems of soft contact lens wear on the women college students. The results were as follows 1. Almost the purchase of soft contact lens was the optical shop. 2. Almost the motive of soft contact lens use was the discomfort of glasses wear. 3. Almost the good feeling of glasses wear was moderate degree. 4. On the main reason of exchange of contact lens, teens was contact lens damage and tweenths was lifespan of contact lens. 5. On the contact lens wearing time at one day, teens was over 10 hours and tweenths was from 7 hours to 10 hours. 6. On the contact care and treatment, teens was a lens washing and storage and tweenths was a lens washing and disinfectant. 7. On the main difficult of contact lens handling, teens was a lens separation in eye and disinfection of lens case and tweenths was a solution treatment and insertion of contact lens in the eye. 8. On the contact lens insertion in the eye, the most difficult item was hanging of the eyelid and fear thinking in teens and fear thinking in tweenths. 9. On the difficult in separate of contact lens wear, a most subjects were eye opening. 10. On the most inconvenient state in contact lens wearing, the subjects were eye redness, foreign body and eye pain. 11. On the advantage of contact lens wearing, teens was decrease in glasses side effects and twenties was a beauty.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.37-58
• /
• 2011

In general, testing DB applications is much more difficult than testing other types of software. The fact that the DB states as much as the input data influence and determine the procedures and results of program testing is one of the decisive reasons for the difficulties. In order to create and maintain proper DB states for testing, it not only takes a lot of time and efforts, but also requires extensive IT expertise and business knowledge. Despite the difficulties, there are not enough research and tools for the needed help. This article reports the result of research on automatic creation and maintenance of DB states for testing DB applications. As its core, this investigation develops an automation tool which collects relevant information from a variety of sources such as log, schema, tables and messages, combines collected information intelligently, and creates pre- and post-Images of database tables proper for application tests. The proposed procedures and tool are expected to be greatly helpful for overcoming inefficiencies and difficulties in not just unit and integration tests but including regression tests. Practically, the tool and procedures proposed in this research allows developers to improve their productivity by reducing time and effort required for creating and maintaining appropriate DB sates, and enhances the quality of DB applications since they are conducive to a wider variety of test cases and support regression tests. Academically, this research deepens our understanding and introduces new approach to testing enterprise systems by analyzing patterns of SQL usages and defining a grammar to express and process the patterns.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.1-7
• /
• 2012

The main purpose of this research is to evaluate the effect of light quality on the growth and physiological activities of Laurus nobilis plants growing indoors, the L. nobilis seedlings were grown under four types of lighting for 180 days. The seedlings were grown under 4 different treatments((n=9 seedlings per treatment): control, control supplemental UV-B irradiated(+UV), FR reduced(-FR) and simultaneously supplemental UV-B irradiated and FR reduced(+UV-FR)). It was found that UV-B irradiation(+UV) reduced dry weight and leaf area, and increased leaf thickness and the amount of UV-absorbing compounds per unit leaf area. In contrast, a reduction in far-red(FR) light did not affect any of these parameters. Interestingly, however, the elongation growth and net photosynthetic rate of the L. nobilis seedlings grown under simultaneous UV-B irradiation and FR reduction(+UV-FR) were significantly decreased than the control treatment. From these results, it is concluded that the light quality has a large effect on the indoor growth of L. nobilis. This study can suggest basic information for managed in the L. nobilis in indoor using light quality.