• Information Display
• /
• v.23 no.1
• /
• pp.20-28
• /
• 2022

• Journal of the Korean Electrochemical Society
• /
• v.7 no.1
• /
• pp.32-37
• /
• 2004

The charge/discharge capacity of natural graphite anode in lithium secondary batteries was examined as a function of charge/discharge rate. When the natural graphite anode was galvanostatically cycled in the range of 0.0-2.0V $(vs.\;Li/Li^+)$, the charging capacity decreased with an increase in the charging rate, which is caused by an earlier approach to the charging cut-off (0.0 V) before the complete charging that is in turn caused by an ever-increasing overpotential at higher rates. Even if the overpotential of discharging reaction also increased at higher discharge rates, the discharging reaction took place in the range of 0.0-0.3 V that is far below the discharge cut-off (2.0 V). As a result, the discharge capacity was not affected by the discharge rate because all the lithium ions once intercalated are fully discharged even at high current condition. As the overpotential of lithium deposition reaction also increased at high current condition, the charge capacity of natural graphite could be enlarged by lowering the charging cut-off voltage below 0.0 V, There is, however, a limitation for the lowering of cut-off voltage because the resistance for lithium deposition is smaller than that of lithium intercalation into graphite. When the charge cut-off voltage was lowered down to -0.04 V under IC condition, lithium ions were inserted into graphite without lithium deposition such that the discharge capacity could be raised up to $11\%$.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.3
• /
• pp.37-42
• /
• 2010

This study investigated on details of flow characteristics of a multi-blade fan for domestic ventilation. Experiments and analysis were carried out to describe on flow pattern with variations of cut-off angle near the scroll housing throat, which were performed by PIV measurement for the flow field and by total pressure probes. The stagnation point at cut-off region of the fan moves to the exit of the scroll housing as the cut-off angle increases. The movement of stagnation point and the variation of throat area of the scroll housing influence to the distribution of velocity magnitude at the exit of the fan. Furthermore, a large distortion of the velocity distribution at the scroll exit causes to increase mixing loss along the flow path.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.365-370
• /
• 2001

In order to minimize unstable flow occurred at a multiblade fan/scroll system, optimal angle and shape of cut-off was determined by using two-dimensional turbulent fluid field analyses and neural network. The results of CFD analyses were used for learning as data of input and output of neural network. After learning neural network optimization process was accomplished for design variables, the angle and the shape of cut-off, in the design domain. As a result of optimization, the optimal angle and shape were obtained as 71 and 0.092 times the outer diameter of impeller, respectively, which are very similar values to previous studies. Finally, it was verified that the fluid field is very stable for optimal angle and shape of cut-off by two-dimensional CFD analysis.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.618-620
• /
• 2023

최근 자연어처리 분야에서 의미론적 유사성을 반영하기 위한 대조 학습 (contrastive learning) 관련 연구가 활발히 이뤄지고 있다. 이러한 대조 학습의 핵심은 의미론적으로 가까워져야 하는 쌍과 멀어져야 하는 쌍을 잘 구축하는 것이지만, 기존의 손실 함수는 문장의 상대적인 유사성을 풍부하게 반영하는데 한계가 있다. 이를 해결하기 위해, 이전 연구에서는 삼중 항 손실 함수 (triplet loss)를 도입하였으며, 본 논문에서는 이러한 삼중 항을 구성하기 위해 대조 학습에서의 효과적인 토큰 컷오프(cutoff) 데이터 증강 기법을 제안한다. BERT, RoBERTa 등 널리 활용되는 언어 모델을 이용한 실험을 통해 제안하는 방법의 우수한 성능을 보인다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2003.08a
• /
• pp.198-198
• /
• 2003

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.02a
• /
• pp.124-124
• /
• 2004

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.5
• /
• pp.82-90
• /
• 2018

The nuclear structures are composed of large diameter bars over No.36. If the hooked bars are used for anchorage of large diameter bars, too long length of the tail extension of the hook plus bend create congestion and make an element difficult to construct. To address those problems, headed bars were developed. Provisions of ACI 318-08 specify the development length of headed bars and ignore the effect of transverse reinforcement based on the background researches. However, if headed bars are used at the cut-off or lap splice, longitudinal reinforcements, which are deformed in flexural members, induce tensile stress in cover concrete and increase the tensile force in the transverse reinforcement. The object of this research is to evaluate the effects of transverse reinforcement on the anchorage capacity of headed bar so anchorage test with variable of transverse rebar spacing was conducted. Specimens, which can consider the behavior at the cut-off, were tested. Test results show that failure of specimen without transverse reinforcement was sudden and brittle with concrete cover lifted and developed stress of headed bars was less than half of yield strength of headed bars. On the other hand, in the specimen with transverse reinforcement, transverse rebar directly resist the load of free-end so capacity of specimens highly increased.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.621-623
• /
• 2022

본 논문은 FEC (Fog Edge Computing) 환경의 모바일 장치에서 요구되는 서비스의 구현 모듈을 에지 서버에 부분 오프로딩하기 위하여, 서비스 구현 모듈의 DAG 토폴로지에 포함된 분기구조의 분할 방법을 제안한다. 제안 방법은 최소-컷 문제를 적용하여 분기구조들의 오프로딩 여부 결정, 부분 모듈들의 실행위치 결정 및 최적 실행경로 추출에 유용하게 사용된다.

• Vacuum Magazine
• /
• v.4 no.2
• /
• pp.10-14
• /
• 2017

In this paper, I present the introduction of cutoff probe in plasma diagnostics. This paper shows the whole progress for the cutoff probe including how to start to develop the cutoff probe in the initial period, what idea has been included during the development, how to evolve the probe during ten years.