• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1301-1307
• /
• 2001

Video retrieval system must offer representation frame list to do to do play from point that user wants. Representation frame list can get though cut detection point exactly. This paper dismembers frame to fixed block to cut detection point, and compare same block histogram cost of next time frame. If result that compare does not exceed thresold, detect next frame to cutting.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.507-510
• /
• 1998

다양한 분야에서 중요하게 사용될 수 있는 뉴스 비디오 데이터베이스를 구축하기 위해서는 비디오 색인의 자동화에 관한 연구가 필연적이다. 본 논문에서는 뉴스 비디오 색인을 자동화하는 방법으로, 이전에 제안한 컷 추출 방법을 이용하였다. 컷에 의해 추출된 키 프레임에서 앵커 인식 알고리즘으로 앵커 프레임을 자동으로 추출하여 색인을 부여하는 방법으로 비디오 스트림에 대한 색인을 자동화하였다. 구성되는 색인 구조의 형태는 앵커 프레임들이 시간에 따른 사건의 연결이 되고, 앵커 프레임 내에서는 종속되는 키 프레임들을 중심으로 원형을 형성한다. 이들 각각을 논리적으로 통합하면 사용자의 관점에 따라 여러 가지 방법으로 브라우징되며, 사용자가 원하는 뉴스 비디오 씬들을 쉽게 선택하여 볼 수 있는 특징을 제공하는 장점을 부여한다. 또한, 색인화 된 비디오 스트림을 이용하면 자동적으로 비디오 편집을 수행 할 수 있는 비디오 저작도구의 기반을 제공할 수 있다.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.3
• /
• pp.37-42
• /
• 2010

This study investigated on details of flow characteristics of a multi-blade fan for domestic ventilation. Experiments and analysis were carried out to describe on flow pattern with variations of cut-off angle near the scroll housing throat, which were performed by PIV measurement for the flow field and by total pressure probes. The stagnation point at cut-off region of the fan moves to the exit of the scroll housing as the cut-off angle increases. The movement of stagnation point and the variation of throat area of the scroll housing influence to the distribution of velocity magnitude at the exit of the fan. Furthermore, a large distortion of the velocity distribution at the scroll exit causes to increase mixing loss along the flow path.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.4
• /
• pp.100-107
• /
• 2015

Recently, high-efficiency machining in the production of high-value products with a complex shape has constantly been required with the need for hybrid machining. In this study, in addition to the wire-cut E.D.M. and vibration used to present the possibility of a hybrid process by carrying out the aluminum alloy experiment, the hybrid process determines the nature of the surface. The selected experimental parameters are horizontality, waveform, amplitude, peak current, and frequency. The experimental results give guidelines for selecting reasonable machining parameters. The surface roughness was improved by about 20% with increases in the amplitude of the vibration.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.39-45
• /
• 2012

Currently, the aircraft industry, aircraft parts as well as airframe have been developed in producing, the aircraft parts and fuselages have been produced the product by cutting rather than forging and casting because of the residual stress and stress concentration. In this study, the aircraft is being used in many parts of aluminium alloy 2024 in wire-cut E.D.M. The selected experimental parameters are peak current, no-load voltage, off time and feed rate. It is found that cutting mountain part on surface roughness of the curve 0.3mm than 0.25mm diameter wire electrode is stable in many uniform distribution.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.14-18
• /
• 1996

From the experimental study of Wire-Cut EDM of die-material(SKD-11), machining characteristics such as machining rate, surface roughness and hardness have been observed and evaluated under the conditions varing pulse on time, pulse off time, peak voltage after fixing other conditions. It was found that various operating conditions have significant influences on machining rate, surface roughness. Hardness of workpiece was unaffected by operating conditions.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.365-370
• /
• 2001

In order to minimize unstable flow occurred at a multiblade fan/scroll system, optimal angle and shape of cut-off was determined by using two-dimensional turbulent fluid field analyses and neural network. The results of CFD analyses were used for learning as data of input and output of neural network. After learning neural network optimization process was accomplished for design variables, the angle and the shape of cut-off, in the design domain. As a result of optimization, the optimal angle and shape were obtained as 71 and 0.092 times the outer diameter of impeller, respectively, which are very similar values to previous studies. Finally, it was verified that the fluid field is very stable for optimal angle and shape of cut-off by two-dimensional CFD analysis.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.01a
• /
• pp.51-53
• /
• 2011

최근에는 텍스트정보 보다 동영상정보를 다루는 일이 많아졌고 그에 따라 동영상 데이터의 분할, 색인, 검색 등을 위해 장면 전환 검출이 필요하게 되었다. 장면 전환 검출 기술은 비디오 데이터의 장면 변화가 발생하는 경계를 검출하는 기술이다. 본 논문에서는 에지 이미지를 이용한 장면전환 검출과 이를 위한 임계값 설정, 그리고 결과에서 중복된 이미지와 오 검출 된 이미지를 줄여줄 수 있는 구현에 대하여 실험결과를 바탕으로 설명한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.929-932
• /
• 2002

As 3-D solid modeling systems have been widely used in product design recently, dedicated design systems for molds of the products have been developed and introduced to mold manufacturers. These mold design systems provide solid modeling capabilites for mechanism to free undercuts. This paper describes an algorithm for slide design capability that has been developed based on a commercial CAD system, Unigraphics. Since the relationship between slide parts were investigated and predefined using parameters in the system, the dimensions and locations of the parts are modifed automatically when a part is modified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.6
• /
• pp.511-514
• /
• 2004

Punch and die plate which are press die parts can be made using machine tool or using both machine tool and W-EDM. When machine tool is used, the die life is 2,000,000 to 230,000 strokes. But with W-EDM, the die life is 700,00 to 800,000 strokes. This can be caused by the process deformation layer after W-EDM. SEM pictures of processed section before and after W-EDM are taken to see if the process deformation layer appeared. Also the elimination method is studied.