• Journal of the Korean Home Economics Association
• /
• v.38 no.12
• /
• pp.249-256
• /
• 2000

본 연구는 유방절제수술을 받은 여성들이 착용하는 브래지어와 보정물의 중량을 결정하는데 필요한 예비자료를 수집하기 위하여 중년여성 12명을 대상으로 31항목에 대한 인체계측 및 석고법에 의한 유방용적측정을 실시하고 얻어진 유방관련 항목자료와 각 치수별 무게자료를 비교.분석하였다. 그 결과는 다음과 같다. 1.유방용적 측정결과 모든 피험자에 있어 오른쪽과 왼쪽 유방용적에 차이가 있는 것으로 나타났다. 2. 브래지어 컵 치수는 가슴둘레와 밑가슴둘레간의 차이로 결정되는 것이므로 유방용적과 브래지어 치수의 크기가 일치하지 않는 것으로 나타났다. 3.절반 이상의 피험자가 자신의 브래지어 치수를 잘못 선택하고 있는 것으로 나타났다.

• Journal of the Korean Home Economics Association
• /
• v.49 no.5
• /
• pp.1-10
• /
• 2011

To provide the basic data to manufacture superior brassiere, this study was analyzed the evaluation of wear sensation of brassiere and the satisfaction of breast type by breast circumference and volume of 182 twenties-aged women. The results were as follows: First, it was reliable to set up the cup size of brassiere by using the breast circumference. Hemispherical breast was the same as cone-shaped breast in breast classification by breast circumference and volume. Second, the breast sizes were able to classify into under 200cc, 200~300cc, 300~400cc, and over 400cc by volume, but measuring the volume was more difficult than measuring the breast circumference. Last, there were correlations between breast circumference and breast volume by breast type. And there were differences on improvement, brassiere size, and the satisfaction of breast type by breast circumference and volume. This results will give basic informations for brassiere design that reflects breast type according to breast circumference and volume for functional brassiere.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.1
• /
• pp.67-78
• /
• 2010

This paper analyzes how to measure breast volume and the change in breast volume after wearing a brassiere. Measurement using a breast replica is used to measure the breast volume of 41 women in their twenties. The rate of persons having flat and hemispherical breast are high. The majority of subjects are size 75A, 80A, and 75B, and their under-bust size is 70. The current size specification should be refined for fitting according as the girth under bust decreases. The correlation between breast volume and the circumference of the breasts was high. It was more reliable to set up the cup size of a brassiere using the breast circumference. The mean breast volume is 263.68cc (nude) and the total volume wearing brassiere is 342.05cc. The volume difference according to wearing a brassiere is 78.37cc, which is less than the brassiere volume itself. The results show, the less breast volume of a subject, then the greater volume in wearing a brassiere.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.7
• /
• pp.857-864
• /
• 2016

In the present work, vibration analysis of high speed rotary bell cup model for paint atomizer application is carried out through numerical simulation. At first, eight bell cup models, considering four different cup shapes and two different cup diameters, are proposed and corresponding dynamic characteristics are investigated. To evaluate the operating stability, critical speed analysis is conducted using Campbell diagram and separation margin between operating speed and critical speed is identified. Unbalance vibration responses are also studied according to operating speed and balancing quality grade of G. Finally, the stability and adequacy of the proposed bell cup models are discussed for field application.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.220-224
• /
• 2004

하천유량은 이수${\cdot}$치수${\cdot}$환경 관련 사업에서 매우 중요한 기초자료이다. 현재까지는 평${\cdot}$저수시에는 점유속계, 홍수시에는 부자를 이용하여 유량을 측정하고 있다. 이러한 방법에는 많은 측정인원과 비용 및 시간이 소요되고 홍수시에는 안전사고의 발생 가능성도 있다. 이를 해결하기 위하여 고정식 초음파유속계를 이용하는 유량측정법의 적용성 및 타당성을 검토하였다. 초음파유량계의 유량을 검증하기 위하여 프라이스컵 유속계, 마그네틱 유속계 및 이동식 초음파유량계 (ADCP) 등 기존 유량측정법으로 유량을 측정하여 서로 비교하였다. 그 결과, 약간의 차이는 있지만 서로 잘 일치하고 있음을 알 수 있었다. 향후 고정식 초음파유량계를 이용한 하천유량측정의 실용화가 가능한 것으로 판단되었다.

• Transactions of Materials Processing
• /
• v.24 no.2
• /
• pp.115-120
• /
• 2015

Deep drawing of cylindrical cups is one of the most fundamental and important processes in sheet metal forming. Circular cups are widely used in industrial fields such as automobile and electronic appliances. Some of these cups are formed by a one-stage process, others such as battery cases and beverage cans are made by a multi-stage process. In the current study the multi-stage deep drawing of aluminum sheet metal is examined. The process consists of two deep drawing operations followed by two ironing operations. The press die, which can be used for the four-stage forming process, was manufactured allowing punch and die components to be easily changed for various experiments. The rolling direction of both the sheet and the drawn cups was always positioned toward the horizontal x-direction on the die face to minimize experimental errors during the progressive forming. The dimensional accuracy of the cylindrical cups formed at each stage and the earing defect due to the anisotropy of sheet were investigated. The influence of anisotropy on the thickness distribution was also examined. Both the thickness and the outer diameter of the cups were measured and compared for each set of experimental conditions. It was found that the dimensional accuracy of cups rapidly improves by employing the ironing process and also by increasing the amount of ironing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.3
• /
• pp.280-291
• /
• 2013

This paper analyzes desirable breast types using measurements from 31 selected female subjects based on the ratio of breast in works of art and to design a brassiere cup design according to the breast type of 182 female subjects in their 20s. The subjects selected for this paper are somewhat larger than a previous study on aesthetically perfect breasts of foreigners according to chest breadth, center neck point to breast point, breast circumference, and breast volume. However, the aesthetic breasts of foreigners are larger than the subjects selected for this study according to chest depth, under-bust circumference, and bust point to bust point. Comparing various breasts types and aesthetic breasts, padding is necessary to complement the form of flat breasts to increase the volume and diameter. Brassiere cups for cone-shaped breasts should be designed to increase breast volume through an increase in nipple height. Hemisphere breasts should be designed to increase the overall volume-leaving diameter. Protrusion breasts should enhance the functions of aggregating and supporting without any increase or decrease of the breast volume. Drooping breasts require the ability to support a large volume to stabilize the breast. Subjects were selected depending on the ratio of breast silhouette as works of art and who have large breasts in disproportional to a slender trunk. Three items, the circumferential length of breast, height of the nipple, and the depth of inner breast using the anthropomorphic measurements of 182 subjects were measured through regression equations for breast volume. Breast volume = -394.86 + 27.52 ${\times}$ (the circumferential length of breast) + 18.73 ${\times}$ (height of the nipple) + 12.85 ${\times}$ (the depth of inner breast). Regression equations to extract the aesthetic breast volume in measurements irrelevant to breasts using the anthropomorphic measurements of 31 subjects were as follows. Aesthetic breast volume = -611.30 + 17.67 ${\times}$ (bust circumference) -24.29 ${\times}$ (under-bust circumference) + 16.31 ${\times}$ (neck point to breast point to waistline) + 22.83 ${\times}$ (bust breadth) + 12.22 ${\times}$ (waist depth) -8.34 ${\times}$ (interscye- front). This prediction equation is useful to develop a breast type brassiere pattern, complement breast enhancement surgery, or minimize the effect a mastectomy.