• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1116-1120
• /
• 2006

하천주변 저지대에 주택이나 공장 등의 시설물 집중과 산지의 개발 및 인구 집중으로 인한 도시화 지역의 증가로 홍수 피해는 더욱 커지고 있다. 특히, 상습침수지구의 주민들은 항상 재해로부터 위험을 느끼고 있으므로 새로운 재해관리체계를 구축하여 이에 대한 확고한 대책이 필요하다. 최근 인터넷 사용의 증가로 많은 사용자들이 웹을 통해 다양한 데이터를 공유하고 있으며, 이러한 추세는 더욱 더 증가할 것이다. 인터넷은 다양한 정보를 네트워크를 통해 사용자에게 실시간으로 제공하고 있으며, 통신기술의 발전, 네트워크 통합화 속에서 그 내용과 방식이 더욱 다양해지고 있다. GIS분야에 있어서도 인터넷 네트워크를 이용하여 분산되어 있는 많은 조직이나 사용자들에게 그 기능과 서비스를 제공하는 추세로 바뀌고 있다. Internet GIS는 원격 지리정보 데이타에 대한 접근, 전송, 분석 및 GIS를 표현하는 수단으로 인터넷을 이용하는 특별한 GIS 도구이다. Internet GIS는 전통적인 GIS 소프트웨어가 가지고 있는 대부분의 기능은 물론 인터넷 및 그와 관련된 WWW 및 FTP 프로토콜의 장점을 가지는 부가적인 기능들을 포함할 수 있다. 이들 부가적인 기능은 원격 데이타 및 응용 프로그램의 교환, 지역 컴퓨터에 GIS 응용 프로그램 없이 GIS 분석 기능을 수행, 인터넷상에서 상호작용하는 지도 및 데이타를 표현하는 기능들을 포함한다. Internet GIS는 객체지향적이고 상호운영적이며, 분산적이라는 주요한 특징을 갖는다. 인터넷에서 각각의 GIS 데이타 및 기능성은 하나의 객체로서 서로 다른 서버에 위치하며 필요시 조합 또는 통합되어 운영된다. Internet GIS를 이용한 상습침수지구 지역정보 제공사이트를 구축하기 위해서는 인터넷으로 서비스 할 수 있는 인터넷용 상습침수지구 GIS기본도를 구축이 필요하다. 인터넷 서비스를 위한 상습침수지구 기본도는 또 다른 형태의 주제도라고 볼 수 있으며, 이를 구축하기 위해서는 자료변환 및 가공이 필요하다. 즉, 각 상습침수지구에 필요한 지형도는 국립지리원에서 제작된 1:5,000 수치지형도가 있으나 이는 자료가 방대하고 상습침수지구에 필요하지 않은 자료들을 많이 포함하고 있으므로 상습침수지구의 데이터를 인터넷을 통해 서비스하기 위해서는 많은 불필요한 레이어의 삭제, 서비스 속도를 고려한 데이터의 일반화작업, 지도의 축소.확대 등 자료제공 방식에 따른 작업 그리고 가시성을 고려한 심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.175-184
• /
• 2005

PDA(Personal Digital Assistants) and laptop computer that are small sized mobile implements are typical devices which capable of using wireless internet. They seem to have a tendency to possess multi-function as well as to miniaturize in accordance with taking advantage of today's digital convergence circumstance. It should be considered that the pointing input device of these mobile computer that have PDA size and laptop's performance has to be added to something very small instead of 4-button, 5-button navigator and with the electric pen. The basic framework for this study is to investigate the usability of the two input devices Trackpoint and Touchpad which regarded as a alternative pointing device for small sized mobile computer. 14 novice subjects compared a Trackpoint to a Touchpad across five curser-control tasks. The study found that subjects executed not more slowly with a Trackpoint input device than with the Touchpad. Observation shows that learning for Trackpoint appears to have had more than for the Touchpad. Subjects expressed preference for the Trackpoint in general work.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.243-249
• /
• 2007

In this paper we introduce a system that assists news reporters to easily edit source video anywhere, and transfer the result from a remote site to the station. Presently reporters are bothered to edit source materials, compress and transfer using several separate tools. Moreover such tools have lots of too complicated features to use only for news production. We have integrated file sending and video editing functions together for seamless workflow. News programs usually need promptness in production. For this reason our system is designed to make it possible the one-stop production of news items outside the TV station. Also the system reflects the demands of field workers, that is, easy usage for the beginner and features for speedy news production. One of the most focused is that the reliability of the system is guaranteed in the process of transfer. To achieve this end, we have implemented several error-resilient schemes for unexpected network errors. Our system consists of remote laptop editing terminals and a newsgathering server. DV-format based editing and analog-to-DV converting device are adopted to capture video from not only lightweight DV camcorders but also old-fashioned ENG cameras into laptop computers. We expect that news reporters and cameramen can take terminals anywhere the Internet is available and both editing and sending will be done on the spot. This will help increase the competitive power of our news production.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.3
• /
• pp.243-250
• /
• 2020

In this paper, we propose an effective software education scheme for universities. The key idea of this software education scheme is to analyze software curriculum of QS world university rankings Top 10, SW-oriented university, and regional main national university. And based on the results, we propose five improvements for the effective SW education method of universities. The first is to enhance the adaptability of the industry by developing courses based on the SW developer's job analysis in the curriculum development process. Second, it is necessary to strengthen the curriculum of the 4th industrial revolution core technologies(cloud computing, big data, virtual/augmented reality, Internet of things, etc.) and integrate them with various fields such as medical, bio, sensor, human, and cognitive science. Third, programming language education should be included in software convergence course after basic syntax education to implement projects in various fields. In addition, the curriculum for developing system programming developers and back-end developers should be strengthened rather than application program developers. Fourth, it offers opportunities to participate in industrial projects by reinforcing courses such as capstone design and comprehensive design, which enables product-based self-directed learning. Fifth, it is necessary to develop university-specific curriculum based on local industry by reinforcing internship or industry-academic program that can acquire skills in local industry field.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.407-414
• /
• 2007

Using the MPI (Moldflow Plastics Insight) software from Moldflow Co., the optimum conditions for producing the upper part of the automobile air cleaner were obtained for 20% talc filled polypropylene (PP). The analysis was carried out to solve the cracking problem between upper and lower parts and the improved process was proposed using the flow balance. The comparative results between the conventional process, CASE-1, with one-pin gate and the new process (CASE-2) comprising two-pin gate system are the followings. In the case of CASE-2, the shorter filling time and reduced cycle time induced an improved production and processibility. In addition, the orientation and volumetric shrinkage are similar to those observed in the lower part, but the assembly, deformation, and physical characteristics are enhanced. The problem induced by the CASE-1 did not originate from the residual stress, but from the difference in the size of the upper part air cleaner after shrinkage. Thus, the orientation problem was expected to improve by optimizing the gate structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.656-664
• /
• 2020

This study obtained basic data for developing human resources with creativity convergence competency by surveying and analyzing the level of creativity convergence competency of university students. The study was conducted from October 1, 2019 to November 10, 2019 on university students attending the departments of computer science, pharmaceutical engineering, physical therapy and dental hygiene. The data from 296 students was finally used for this study, and IBM SPSS/Win statics 23.0 programs were used to analyze the data. Students who graduated from Seoul/Gyeonggi High School or those students with high undergraduate satisfaction were found to have high creativity convergence ability, and these results were statistically significant. Further, the group of students who had experience with Campus/Suburban competition, Global Competency training/ International exchange programs or the Capstone Design/Team Based Project showed high creativity convergence competency, and these results were statistically significant. Thus, this study identified the necessity of developing and operating various extra-curricular programs at education institutes in order to enhance students' creativity convergence capability.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.483-492
• /
• 2019

The culture and education are very active with the active policy and support to form the government's Maker Movement. The purpose of this study is to grasp the current status of the education sector of the domestic maker movement, which is increasing recently, and to propose a plan for activating maker education for the development of a positive direction. To this end, first, the current status and problems of domestic maker training are derived through in-depth interviews with existing maker training operators and participants. Second, based on the contents of the interview script, keyword analysis and its characteristics through the qualitative survey analysis program (NVIVO) are identified. Third, based on the analysis results, we propose a plan and development direction for domestic maker education. Based on the educators who performed maker training and the students involved, professional maker teachers were required for the professionalism of education, and the expansion of maker channels and professional networking of participating students was required. In addition, there was a need for specialized programs and appropriate policy support that reflected the characteristics of maker training. This study aims at contributing to the activation of maker education, which is a major field of maker movement, by helping to improve concrete support methods, training related educators, and educational environment for maker education.

• The Journal of Korean Association of Computer Education
• /
• v.5 no.4
• /
• pp.134-145
• /
• 2002

The purpose of this study is to present the functional and technical solutions for text learning of web-based textbook in which each letter has its own focal point. The solutions help learners not to lose the main focus when eye moves to the next letter or line. The text screen of the electronic textbook automatically scrolls the text to up and down or left and right directions which are preassigned by learner. It doesn't need the operation of mouse or keyboard. And learner can change scroll speed and types anytime during scrolling. Automatic text scroll function is a solution for controlling data and screen to reflect the personal favor and ability. It contains the content structure of the text(characteristics, categorizations etc.), the appearance of the text(density, size, font etc.), scroll options(scroll, speed etc.), program control type(ram resident program etc.), and the application of the screen design principles(legibility etc.). To resolve these functional problems, technical 8 phases are provided, which are environment setting, scroll option setting, copy, data analysis, scroll coding, centered focus coding, left and right focus coding, implementation. The learner can focus on text without dispersion because the text focal points stay in the fixed area of screen. 1bey read the text following their preferences for fonts, sizes, line spacing and so on.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.10
• /
• pp.125-137
• /
• 2021

This study was intended to develop a prototype of new Hanbok Cheollik one-piece based on design extracted through a preference survey on new Hanbok Cheollik one-piece. Through this, it was intended to provide information on patterns that are fundamental to the production of new Hanbok Cheollik one piece. The pattern of the experiment was produced by modifying D pattern, which was selected as excellent in the comparison of commercial Cheollik one-piece patterns. The SPSS 26.0 program was used to analyze the appearance evaluation of patterns. As a result of the 1^st evaluation of appearance and garment pressure, the shoulder, sleeve length, skirt length and sleeve width required modification, reducing the sleeve length by 8.0cm and the sleeve width by 1.0cm in total. The length of the skirt was reduced by 5.0cm and the shoulder end point was reduced by 0.5cm on both sides to modify the shoulder width. As a result of the 2^nd evaluation, the waist area, sleeve width, and skirt wrinkles were required to be corrected, reducing 2.0 cm waist width and 1.0 cm sleeve width and removing wrinkles on the front center and side area. The final pattern was highly appreciated. In future studies, it is thought that research should be conducted through study of Cheollik one-piece pattern according to material and age and the actual wearing experiment according to fabric and age.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.3
• /
• pp.178-185
• /
• 2015

Purpose: The purpose of this study was to conduct a comparative assessment on the satisfaction level for the two interfaces of surgical guide system (SimPlant and R2GATE), the design and convenience of manufactured surgical guides and the importance of using the surgical guides thereof by means of survey. Materials and Methods: Hereupon, they simulated the implant surgical process by mounting the two manufactured systems of surgical guide on a dental mold, respectively. The study subjects were instructed to complete the questionnaire as to the satisfaction level upon completion of the simulated surgery. This study summarized the data of each question after collecting the completed questionnaires. Then, this study analyzed the summarized data by utilizing statistical program SPSS 20.0 (IBM). Results: R2GATE had a higher value of the satisfaction level on the design and convenience of manufactures surgical guides. R2GATE group ($7.33{\pm}1.26$) was found to have a higher value in terms of the overall satisfaction level compared to SimPlant group ($6.67{\pm}1.26$) (${\alpha}$ = 0.05). Conclusion: The user satisfaction level on the surgical guide manufactured for R2GATE system was to such an extent as it can be widely used in clinical environment. Moreover, the surgical guide manufactured as R2GATE system can guide both the length and direction of a drill simultaneously. As a result, it is highly recommended for those beginners who do not have a lot of experience in implant placement.