• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.179-180
• /
• 2009

자동화 컨테이너 터미널의 생산성을 향상시키기 위해서는 안벽크레인의 작업 지연 시간을 최소화하는 것이 중요하다. 안벽크레인의 작업 지연 시간은 이송 차량들이 효율적으로 주행하여 제 시간에 필요한 위치에 컨테이너를 운반함으로써 단축이 가능하다. 이송차량의 주행 경로는 사전에 결정된 레이아웃에서 최단 거리, 최단 시간 경로 등의 라우팅 방법을 통해 결정된다. 주행 경로 레이아웃은 안벽크레인의 작업이 진행됨에 따라 안벽 크레인의 위치, 작업 물량 및 병목지점이 변화하므로 동적으로 조정한 필요가 있다. 본 논문에서는 안벽 크레인의 위치 변화에 따라 주행 경로 레이아웃을 동적으로 최적화하는 방안을 제안한다. 제안방안의 효율성은 시뮬레이션 실험을 통해 검증하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.1
• /
• pp.237-246
• /
• 2015

In this paper, Improved productivity models of container terminal are provided by utilizing a simulation considering Tandem-lift Quay Crane and transport vehicle of container's high productivity 'Alternative ship-to-yard vehicles.' Feature of this method is deriving the data of tandem-lift Quay Crane and Alternative ship-to-yard vehicles, estimating the productivity model of tandem-lift Quay Crane by using regression analysis. Tandem-lift Quay Crane is equipment of loading and unloading to increase productivity approximately by 2 time existing (single, twin) Quay Crane by dealing with four 20ft containers or two 40ft containers at the same. Alternative ship-to-yard vehicles can transfer containers(4TEU) more than existing Yard Tractor. This paper is deriving the optimal combination showing the highest productivity by using simulation considering Tandem-lift Quay Crane and Alternative ship-to-yard vehicles on container terminals and developing estimating model of productivity by using regression analysis using data of simulation.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.747-753
• /
• 2005

In this paper, as an anti-sway control strategy of container cranes, we investigate a variable structure control in which the moving load follows a given trajectory, whereas both the trolley and hoist controllers achieve their positioning problems. It is crucial, in an automated container terminal, that collisions should be avoided during the transference of containers from one place to another. It is also necessary, in the case of a quay crane, to select suitable loading and unloading trajectories of containers, so that possible collisions with surrounding obstacles are avoided. After a brief introduction of the mathematical model, a robust control scheme (i.e., a second-order sliding mode control that guarantees a fast and precise transference and a suppression of the resulted swing) is presented. Despite model uncertainties and unmodeled actuators dynamics, the swing suppression from the given trajectory is obtained by constraining the system motion on suitable sliding surfaces, which include both the desired path and the swing angle. The proposed controller has been tested with a laboratory-size pilot crane. Experimental results are provided.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.152-157
• /
• 2002

본 연구에서는 컨테이너 터미널의 자동화 설비 중 안벽용 크레인(Quay Crane: QC)과 장치장용 크레인(Automated Transfer Crance: ATC)간의 컨테이너 이송을 담당하는 AGV(Automated Guided Vehicle)의 운영에 관한 시뮬레이션을 수행할 수 있는 전용의 시 뮬레이터를 개발하는데 목적은 두고 수행하였다. 자동화 컨테이너 터미널의 처리 능력은 선석의 QC 능력에 의해서 결정되지만, QC의 능력을 최적화하기 위해서는 컨테이너 터미널 내에서의 AGV의 운영 효율이 결정적인 역할을 한다. 또한 AGV의 운영 효율에는 장치장의 ATC 작업시간이 영향을 준다. 연구결과, AGV의 운영 효율 평가를 위한 시뮬레이터를 개발하였으며, 이를 이용하여 QC의 작업시간과 ATC의 작업시간에 따른 AGV의 적정대수를 산출하였다. 본 시뮬레이터는 실제 컨테이너 터미널의 운영 상대와 유사한 시뮬레이션을 수행할 수 있고, 컨데이니 터미널의 운영 능력을 산출하는데 적합하도록 개발되었다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.379-384
• /
• 2014

This article describes the dynamic behaviors of a rubber tired gantry crane(RTGC) under typical load conditions which are used in the design of gantry cranes. In order to investigate the dynamic characteristics of an RTGC, we developed a finite element crane model for its huge structure. The finite element model was validated with the modal test results, e.g., natural frequencies and normal modes. And other components of RTGC were converted into detailed 3D CAD models and finally transformed to rigid body models in a dynamic simulation program ADAMS. The load conditions considered in this paper were a normal operating condition(OP1) and container hanging condition with no external loads. As a result, we could find there was large influence of crane's vibration owing to its structural stiffness and deformation. And the vibration of crane could made the movements of RTGC, which occurs crash or malfunction of crane works.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.829-835
• /
• 2008

The objective of this study is to present the two-step dispatching strategy for the purpose of the transport vehicle with multi-function used in container terminal. The two-step dispatching is a method to save the waiting time between transport vehicle and cranes using real time location control. The first step dispatching is to allocate the destination location based on the real time location information. The second step dispatching is to indicate the specific job such as loading, unloading, and pick-up based on the condition of working area. This two-step dispatching strategy decreases the waiting times of the stevedoring system and will contribute at a productivity improvement in container terminal.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.280-281
• /
• 2010

컨테이너의 효율적인 이송은 작업 시간이 곧 비용으로 연결되는 항만에서 가장 중요한 요소이다. 따라서 1990년대 중반부터 세계항만은 RMGC(Rail-Mounted Gantry Crane), RTGC(Rubber-Tired Gantry Crane)등의 크레인이 개발되어 야드에서 컨테이너를 적재하는데 널리 이용되어 오고 있으며, 특히 최근에는 CCD카메라, 각종 센서 둥을 이용하여 트랜스퍼 크레인의 무인화를 위해 수많은 연구가 진행되었고 실용화 된 많은 기술들이 현장에서 사용되고 있으나, 여전히 많은 부분이 연구를 필요로 한다. 특히 RTGC의 경우 RMGC에 비해 무인 자동화 연구개발은 미비한 수준이다. 따라서 본 논문에서 RTGC의 무인자동화 작업을 위한 가장 기초라고 볼 수 있는 수학적 모델링을 기반으로한 고정밀도 주행제어기를 설계하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.423-428
• /
• 2005

Due to the fast growing rate of the global container trade, every major port is under the pressure of meeting the projected capacity demand. As a result, alternative solutions have been sought for improving capacity and meeting the growing demand for container storage area and terminal capacity. Moreover, material handling process re-engineering is now a critical issue for logistics and supply chain managers of airline, shipping lines, terminal and warehousing enterprises around the world. Therefore, the purpose of this paper is to develop the 3D simulator for executing performance valuation of port transportation systems. The developed 3D simulator system is to measure the effectiveness of the proposed total system and compare it with existing practices. The performance analysis variables are also defined for these comparisons.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.377-382
• /
• 2005

This paper deals with productivity improvement of stevedoring system by pooling opertaions of transport vehicle at automated container terminal. Usually, in traditional container terminals, grouping operations of transport vehicle are applied for container crane because vehicle routing path is simple and vehicle assignment is easy. But this static assignment(SA) operation that arrsign vehicles to container crane ar apron reduces flexibility of vehicles. Therefore, This paper presented 4 dynamic assignment(DA) method to improve efficiency of vehicles. These 4 dynamic assignment method consider present situations of container crane such as sequence(Se), queue time(Qt), productivity(Pr), numeric of vehicle assignment(Nv), numeric of buffer(Nb) at vehicles assignment. At the results, dynamic assignment operation to consider Qt, Nv, Nb is most efficient and by next time, dynamic assignment operation to consider Se is superior more than static assignment operation. but, dynamic assignment operation to consider Pr or Qt of container crane only is inefficient than static assignment operation.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.399-407
• /
• 2014

Due to the increase of container terminals, as the volume of terminals become distributed, the competition of preserving existing volume and inviting new volume are becoming fierce, and various ways for processing terminal volume and inviting volume are being sought. Container terminal efforts to maximize efficiency in order to improve the volume handling capability and productivity by both expansion of the latest equipment and development of the latest terminal system. There are a variety of factors that influence the improvement of productivity at container terminals. Among them, in the case of yard transfer equipment, if it were to convert from the method of a Yard Tractor(YT) being fixed allocated to a certain Gantry Cranes(GC) to a Pooling System that processes in a method that properly distributes and allocates a Yard Tractor(YT) to multiple Gantry Cranes(GC), the terminal productivity and the fusibility of YT may be increased. The KPI which is an indicator for the productivity at container terminals is GC productivity and since GC productivity cannot exceed the speed of physical GC operations, a Pooling System is applied to increase productivity which its meaning and effect is massive. Here in the Report, we produce the Pooling Algorithm system to improve the efficiency of the transported equipments in container terminal which is actually applying for this method and have compared Non pooling system with Pooling system in the fields. By introducing a transfer equipment pooling system and enhancing the productivity compared to other terminals, it may become an essential factor for increasing the continuous service quality and profitability in terms of terminal business.