• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1053-1058
• /
• 2016

The eLoran(enhanced Long Range Navigation) transmitting antenna is analyzed for co-location with an AM transmitting antenna in an MF transmitting site. To compensate for the loading effect, the umbrella-type loading is applied for eLoran antenna. The validity of the co-location between the MF antenna and the eLoran antenna is verified through the simulation results of the radiation pattern and the return loss. Also, coupling including antenna matching circuit is analyzed to verify the effect of the transmitting circuit. The coupling between the LF and eLoran antenna is -53.3 dB at 100 kHz and -64.8 dB at 1,053 kHz, respectively.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.142-149
• /
• 2019

The coils to transmit the electric energy are necessary to charge an electric vehicle wirelessly. There are several types of coils, from basic circular coils to DD-type coils for enhancing the coupling effect between two coils. However, DD-type coils with a good coupling effect between coils have a disadvantage in use because of the structure complexity of the power conversion device of transmitting and receiving side. In this paper, we propose a method to calculate the inductance value and to design the size of the spiral inductor which is convenient to fabricate when the power is transmitted wirelessly by using two coils in free space. Since the bifurcation phenomenon occurs when the XLm value is similar to the load resistance value in the resonator the XLm value was selected to be equal to the minimum load resistance value to minimize this phenomenon, and the inductance value required for the resonator was calculated. In order to realize the calculated inductance value by the spiral inductor, the relationship between the inductance value and the size, the number of turns, the total coil length of a spiral inductor was investigated. In addition, the change of coupling coefficient k according to the horizontal separation of two coils was examined and an appropriate inductor was selected.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.349-356
• /
• 2018

In this study, the synchronous control system is designed to restrain the speed difference generated between two propellers, namely, synchronous error in a dual electric propulsion system of unmanned surface vehicle, fish finder boat, etc. The control system based on coupling structure is composed of pre-filters and speed controllers for each propulsion system and a synchronous controller cross-coupled between two propulsion systems. The pre-filter and speed controller are designed in order that the propulsion system may follow the speed reference without overshoot and input saturation. And the synchronous controller is designed in consideration of damping and quickness of the synchronous controller system after analyzing effect of the skew disturbance and mismatched dynamic characteristics on synchronous error. Finally, the simulation results show that the designed control system is effective for elimination of synchronous error.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.219-219
• /
• 2010

기존의 플로팅 타입의 메모리는 소자의 소형화에 따른 인접 셀 간의 커플링 현상과 전계에 따른 누설전류의 증가 등과 같은 문제가 발생한다. 이에 대한 해결책으로서 전하 저장 층을 폴리실리콘에서 유전체를 사용하는 SONOS 형태의 메모리와 NFGM (Nano-Floating Gate Memory)연구가 되고 있다. 그러나 높은 구동 전압, 느린 쓰기/지우기 속도 그리고 10년의 전하보존에 대한 리텐션 특성을 만족을 시키지 못하는 문제가 있다. 이러한 문제를 해결 하고자 터널베리어를 엔지니어링 하는 TBM (Tunnel Barrier Engineering Memory) 기술에 대한 연구가 활발히 진행 중이다. TBM 기술은 터널 층을 매우 얇은 다층의 유전체를 사용하여 전계에 따른 터널베리어의 민감도를 증가시킴으로써 빠른 쓰기/지우기 동작이 가능하며, 10년의 전하 보존 특성을 만족 시킬 수 있는 차세대 비휘발성 메모리 기술이다. 또한 고유전율 물질을 터널층으로 이용하면 메모리 특성을 향상 시킬 수가 있다. 일반적으로 TBM 기술에는 VARIOT 구조와 CRESTED 구조로 나눠지는데 본 연구에서는 두 구조의 장점을 가지는 Staggered tunnel barrier 구조를 $Si_3N_4$와 HfAlO을 이용하여 디자인 하였다. 이때 HfO2와 Al2O3의 조성비는 3:1의 조성을 갖는다. $Si_3N_4$와 HfAlO을 각각 3 nm로 적층하여 리세스(Recess) 구조의 트랜지스터를 제작하여 차세대 비휘발성 메모리로써의 가능성을 알아보았다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.7 s.361
• /
• pp.105-111
• /
• 2007

In this paper, we designed and fabricated a 3-dB tandem coupler using air-bridge technology for millimeter-wane monolithic integrated circuits, operating at W-band($75{\sim}110\;GHz$) frequency. Tightly edge-coupled CPW line has low directivity due to different even-mode and odd-mode phase velocity. To overcome this disadvantage, a 3-dB tandem coupler which comprises the two-sectional weakly parallel-coupled lines with equal phase velocity was designed at W-band. The proposed coupler was fabricated using air-bridge technology to monolithically materialize the uniplanar coupler structure instead of conventional multilayer or wire bonded structure. From the measurements, the coupling coefficient of $2.9{\sim}3.6\;dB$ and the good phase difference of $91.2{\pm}2.9^{\circ}$ were obtained in broad frequency range of $75{\sim}100\;GHz$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.62-66
• /
• 2010

In this article, a oscillator at X-band with a double H-shape metamaterial resonator (DHMR) based on high-Q is proposed with metamaterial structure to improve Ihe phase noise and output power. The proposed oscillator is required low phase noise and high output power for the high performance frequency synthesizer. DHMR is designed to be high-Q at resonance frequency through strong coupling of E-field. This character makes phase noise excellent. The oscillator using DHMR is oscillated in X-band so as to apply frequency synthesizer of radar systems. The output power is 4.33 dBm and the phase noise is -108 dBc/Hz at 100 kHz offset of carrier frequency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.713-721
• /
• 2001

In this paper, parasitic patches gap-coupled microstrip antenna and stacked microstrip patch antenna combined with parallel coupled lines, which are a kind of wideband impedance matching network, are proposed to get the wider bandwidth. The iterative method using a distributed network is proposed to design the parallel coupled lines as a wideband impedance matching network. Measurements show that the proposed antennas provide wider bandwidths ~1.6 times and ~1.5 times those of conventional parasitic gap-coupled microstrip patch antenna and stacked microstrip patch antenna. In addition, measured radiation patterns show no serious variation of radiation patterns though the parallel coupled lines is added. The antenna gain is, however, lowered about 1 dB and 0.5 dB by the coupling loss in the parallel coupled lines.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1128-1134
• /
• 2010

This paper is about the development of the 300W underwater thrusting system driven by a brushless DC motor (BLDC) for underwater robots. A design of the structure such as the structure analysis on the thrusting system using FEM and the design of the propeller using the fluid analysis has been performed. Also, a new structure such as decoupling and non-gear structure has been explained. The performance test of the designed and developed thrusting system in water and in air was undertaken and its results were compared with an existing product with high performance. The comparison results show that the developed thrusting system has better performance by 16% in forward thrusting force and by 12% in backward thrusting force.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.299-302
• /
• 2008

In this paper, A compact ultra-wideband(UWB) bandpass filter(BPF) with WLAN notched filter has been proposed. H-shaped slot is studied and adopted to tighten the coupling of inter-digital capacitor in order to improve the BPF's performance. Three pairs of tapered defected ground structures(DGS) are formed to assign their transmission zeros towards the out of band signal, thereby suppressing the spurious passband. Also Meander line slot is developed to reject the undesired wireless local-area network(WLAN) radio signals. That's combining these three structures we obtain a small sized UWB BPF.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.1
• /
• pp.33-41
• /
• 2022

This paper describes a planar microstrip patch antenna designed on dielectric substrate. Two types of planar microstrip patch antennas are studied for the 5G wireless applications, one type is conventional microstrip structure, the other type is stacked microstrip structure fed by coaxial probe. Using electromagnetically coupling method, stacked microstrip patch antenna employing a multi-layer substrate structure was designed. The results indicate that the proposed stacked microstrip patch antenna performs well at 5G wireless service bandwith a broadband from 3.42GHz to 3.70GHz. The impedance bandwidth(VSWR≤2) is 360MHz(10.28%) from 3.42GHz to 3.78GHz. In this paper, through the designing of a stacked microstrip patch antenna, we have presented the availability for 5G wireless repeater system.