• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.151-159
• /
• 2023

In the digital age, innovation is at the heart of information technology development. This paper explores the differences of regional innovation capabilities from within the innovation system from a new perspective. By applying the coupling coordination degree model, the coupling coordination degree analysis is conducted for the three systems of innovation (innovation input, innovation output, and innovation environment) in 31 provinces, municipalities, and autonomous regions of China. The results show that: the overall level of coupling coordination degree in China is low, and the number of provinces in good coordination and quality coordination is low number, but they are all distributed in the eastern economically developed regions, showing a high correlation between regional innovation and regional economic development. The overall trend of China's innovation coordination is on the rise. The research results of this paper can provide a new perspective for the evaluation of innovation capability, and also provide an important impact of innovation on promoting the development of ICT industry.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.197-198
• /
• 2009

고분자 전해질막으로 사용할 수 있는 소수성/친수성 랜덤 멀티블럭 공중합체를 합성하였다. 공중합체는 수산화기를 각 말단에 가지고 있는 소수성 올리고머, 친수성 올리고머 및 반응성이 좋은 커플링 단량체로 친핵성 치환 반응을 활용하여 합성 하였다. 높은 반응성의 커플링 단량체의 존재로 비교적 낮은 온도에서 합성이 됨으로서 고온에서의 에테르-에테르 교환반응에 의한 랜덤화를 억제할 수 있었으며, 높은 중합도의 공중합체를 합성 할 수 있었다. 각 수산화기로 같은 말단으로 조정된 올리고머는 투입 비율의 조정으로 쉽게 이온교환용량을 조정할 수 있었다. 솔루션 캐스팅 방법으로 강도를 가지고 잘 휘어지며 투명한 전해질막을 제조할 수 있었다. 전해질막은 이온전도도, 물흡수율, 부피 변화율, 연료 투과성 등의 측정이 되었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.409-410
• /
• 2011

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.91-95
• /
• 1992

현재 대부분의 공작기계에서는 모터의 동력을 주축으로 전달하기 위해서 커플링, 밸트,기어 등을 사용하고 있지 만 주축이 고속회전할 수록 커플링 구동방법에서는 주축과 모터의 미스얼라인먼트에 의한 진동과 소음이 커지고 벨트 구동방법에서는 원심력에 의한 벨트 장력의 증가 및 벨트의 파손현상, 벨트와 풀리간의 미끄럼현상 등이 발생하며, 기거 구동방법에서는 기어간의 금속접촉에 의한 진동과 소음이 증대하게 된다. 본 연구에서는 모터내장형 주축의 동특성을 체계적으로 해석하기 위해서 유한요소모델을 도입하였다. 특히 공작기계 주축은 세장비가 비교적 작기 때문에 Timoshenko보 이론으로 모델화하였고, 여러장의 얇은 철심용 강판들도 적층된 내장형 모터의 회전부(rotor)는 굽힘변형 및 전단변형에 대해서 상당 수준의 강성효과를 나타내기 때문에 질량효과 외에도 그 강성효과를 수학적 모델에서 고려하였다, 또한 진동실험 결과로 부터 모터회전부의 강성특성을 규명하는 방법을 제시하였으며, 제안된 규명방법의 유용성은 모터내장형 주축에 대한 모드매개변수의 이론값과 실험값을 비교함으로써 입증하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.12 s.354
• /
• pp.23-32
• /
• 2006

Fast and accurate power bus design (FAPUD) method for multi-layers high-speed digital boards is devised for the power supply network design tool for accurate and precise high speed board. FAPUD is constructed, based on two main algorithms of the PBEC (Path Based Equivalent Circuit) model and the network synthesis method. The PBEC model exploits simple arithmetic expressions of the lumped 1-D circuit model from the electrical parameters of a 2-D power distribution network. The circuit level design based on PBEC is carried with the proposed regional approach. The circuit level design directly calculates and determines the size of on-chip decoupling capacitors, the size and the location of off-chip decoupling capacitors, and the effective inductances of the package power bus. As a design output, a lumped circuit model and a pre-layout of the power bus including a whole decoupling capacitors are obtained after processing FAPUD. In the tuning procedure, the board re-optimization considering simultaneous switching noise (SSN) added by I/O switching can be carried out because the I/O switching effect on a power supply noise can be estimated over the operation frequency range with the lumped circuit model. Furthermore, if a design changes or needs to be tuned, FAPUD can modify design by replacing decoupling capacitors without consuming other design resources. Finally, FAPUD is accurate compared with conventional PEEC-based design tools, and its design time is 10 times faster than that of conventional PEEC-based design tools.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.71-76
• /
• 1992

축정렬이 불량한 경우 축진동이 과도하게 발생하여 출력이 감소하고 소음이 발생하며, 심한 경우 회전체의 파손과 같은 손실을 입을 수 있다. 특히 축 정렬불량으로 인한 진동은 교정이 안되는 것이 특징이므로 근본적으로 진동 을 해결하기 위해서는 축 정렬을 다시 시행해야 한다. 그러나 터빈은 다른 기계 구조물과 달리 분해 점검에 많은 시간과 경비가 요구되므로 축 정렬시 정확한 작업이 요구된다. 본 연구에서는 터빈계통의 축정렬을 수행하는 절차 와 방법에 대해서 검토하였다. 이를 위해 축정렬이 입력데이터로 쓰일 수 있 는 상태측정방법중 커플링 원주와 커플링 면 측정방법이 설명되었으며, 측정 값으로부터 축정렬을 수행하기 위해, 베어링의 이동량 계산과정과 쉼 가감량 의 계산방법을 기술하였다. 축정렬의 원리와 방법의 적용과정을 실제로 알아 보기 위해 평택화력 1,2호기에 대한 축정렬이 수행되었다. 1,2호기는 고압터 빈, 2단계의 저압터빈 및 발전기로 구성되어 있는 다축 시스템으로서, 제작 사측에서 요구하는 정렬 기준값을 감안하여 축정렬에 필요한 베어링 조정량 을 계산하였다. 계산과정은 기준로터로 지정된 저압터빈에서부터 축정렬상태 도를 작성하여 가면서 단계적으로 설명되었으며, 최종적으로 쉼의 가감량까 지를 보여줌으로서 축정렬과정을 완료하였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.479-486
• /
• 2012

This paper presents a high-speed automatic micro-alignment system that is a part of an inspection machine for small-sized molded lenses of mobile phones, palm-top computers, and so on. This work was motivated by the shortcomings of existing highest-grade commercial machine. A simple tip/tilt/Z parallel mechanism is designed based on kinematic couplings, which is a 3-degree-of-freedom (3-DOF) moderate-cost alignment stage. It is used to automatically adjust the posture of each lens on the tray, which is impossible by the conventional instrument. Amplified piezoelectric actuators are used to ensure the accuracy and dynamic response. Forward kinematic analysis and simulation show that the parasitic motion is small enough compared to the actuator stroke. From the workspace analysis of the moving platform, it is clear that the output motion range satisfies the design requirements.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.3
• /
• pp.360-366
• /
• 2008

The initial fuzzy partitions in fuzzy rule-based classification systems are determined by considering the domain region of each attribute with the given data, and the optimal classification boundaries within the fuzzy partitions can be discovered by tuning their parameters using various learning processes such as neural network, genetic algorithm, and so on. In this paper, we propose a selection method for fuzzy partition based on statistical information to maximize the performance of pattern classification without learning processes where statistical information is used to extract the uncertainty regions (i.e., the regions which the classification boundaries in pattern classification problems are determined) in each input attribute from the numerical data. Moreover the methods for extracting the candidate rules which are associated with the partition intervals generated by statistical information and for minimizing the coupling problem between the candidate rules are additionally discussed. In order to show the effectiveness of the proposed method, we compared the classification accuracy of the proposed with those of conventional methods on the IRIS and New Thyroid Cancer data. From experimental results, we can confirm the fact that the proposed method only considering statistical information of the numerical patterns provides equal to or better classification accuracy than that of the conventional methods.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.7
• /
• pp.343-350
• /
• 2005

Conventionally, for transferring the primary power to the secondary one, the high frequency series resonant converter has been widely used for the contactless power supply system. However, the high frequency series resonant converter has the disadvantages such as the low efficiency, the high voltage gain characteristics and deviation of the phase angle in the overall load range. To improve this disadvantages, In this paper, the characteristics of the high efficiency and unit voltage gain as well as in-phase are revealed in the proposed three-level LCLC (Inductor-Capacitor- Inductor-Capacitor) resonant converter. The results are verified on the simulation based on the theoretical analysis and the 4kW experimental Prototype.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1166-1168
• /
• 2004

The high frequency series resonant converter has been widely used for the non-contact power supply system with the large air gap and the increased leakage inductance of the non-contact transformer. However. the high frequency series resonant converter has the disadvantages of high voltage gain characteristics in the overall load range due to the large air gap and the circulating magnetizing current. In this paper, unit voltage gain is revealed in the proposed three-level series-parallel resonant converter. The results are verified on the simulation results and the 5kW experimental prototype.