• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.151-159
• /
• 2023

In the digital age, innovation is at the heart of information technology development. This paper explores the differences of regional innovation capabilities from within the innovation system from a new perspective. By applying the coupling coordination degree model, the coupling coordination degree analysis is conducted for the three systems of innovation (innovation input, innovation output, and innovation environment) in 31 provinces, municipalities, and autonomous regions of China. The results show that: the overall level of coupling coordination degree in China is low, and the number of provinces in good coordination and quality coordination is low number, but they are all distributed in the eastern economically developed regions, showing a high correlation between regional innovation and regional economic development. The overall trend of China's innovation coordination is on the rise. The research results of this paper can provide a new perspective for the evaluation of innovation capability, and also provide an important impact of innovation on promoting the development of ICT industry.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.326-327
• /
• 2018

본 논문에서는 단상전력변환시스템에서 발생하는 고유의 2차 리플 전력 문제를 해결하고 dc 캐패시터의 저감을 위한 능동 전력 디커플링 회로의 설계방법을 제시한다. 일반적인 수동 전력 디커플링 방법, 벅-타입 방법 및 커패시터 분할 타입 방법의 능동 전력 디커플링 회로들에서 필요한 최소의 커패시턴스를 계산하는 방법을 제시하고, 같은 조건에서 리플 전력 디커플링 성능을 분석한다. 도출된 최소한의 커패시턴스를 적용한 디커플링 회로의 성능은 MATLAB 시뮬레이션 결과를 통해 비교 분석하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.49-57
• /
• 2002

Including RF Package inductance, substrate coupling through conductive silicon(Si)-substrate is modeled and quantitatively characterized. 2-port substrate coupling model is extended for the characterization of multi-port substrate coupling between digital circuit block and analog/RF circuit block. Furthermore, scalable parameter extraction model is developed. Multi-port substrate coupling can be investigated by linearly superposing a frequency-dependent 2-port substrate coupling model using scalable parameters. In addition, Substrate coupling including RF package inductance effect is quantitatively investigated. It is shown that package effect increases substrate coupling and shifts a characteristic frequencies(i.e., poles) to the higher frequency range. The proposed methodology can be efficiently used to the mixed-signal circuit performance verification.

• 한국가스학회:학술대회논문집
• /
• 2003.05a
• /
• pp.121-126
• /
• 2003

LPG차량이 연료충전중에 운전자 부주의로 오발진하는 경우 설비파손 방지를 위해 자동차와 디스펜서의 설치한 세이프티커플링의 주요 사고원인은 안전장치인 커플링이 분리되지 않아 발생하고 있으며, 사고로 설비파손으로 인한 부수적인 위험도가 크다 따라서 본 고에서는 세이프티커플링이 분리되지 않는 원인을 파악하기 위하여 노후시료의 분리하중, 열화물질의 분석 및 기구적 원인을 분석하였으며, 특히 커플링이 각도에 의해 분리가 되지 않는 조건을 각 부정합 손상으로 정의하고 안전장치로서 제 기능을 수행할 수 있는 방법에 대하여 고찰하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.171-172
• /
• 2010

It includes that the evaluation of the degree of coupling between the shear walls and the coupling beams. It is demonstrated through a review of theoretical investigations of coupling beam behavior.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.239-244
• /
• 2014

Reaction between silica and silane coupling agent without solvent was investigated using transmission mode Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). Bis[3-(triethoxysilylpropyl) tetrasulfide] (TESPT) was used as a silane coupling agent. After removing the unreacted TESPT, formation of chemical bonds was analyzed using FTIR and content of reacted TESPT was determined using TGA. Content of the coupling agent bonded to silica increased with increase in the coupling agent content, but the oligomers were formed by condensation reaction between coupling agents when the coupling agent was used to excess. In order to identify bonds formed among silica, coupling agent, and rubber, a silica-coupling agent-BR model composite was prepared by reaction of the modified silica with liquid BR of low molecular weight and chemical bond formation of silica-coupling agent-BR was investigated. Unreacted rubber was removed with solvent and analysis was performed using FTIR and TGA. BR was reacted with the coupling agent of the modified silica to form chemical bonds. Polarity of silica surface was strikingly reduced and particle size of silica was increased by chemical bond formation of silica-coupling agent-BR.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.68-70
• /
• 2015

The four-port coupler circuit consists of input port, isolation port and two output ports. When it inserts a signal at the input port and the isolation port, the magnitude and phase of the output signal at two output ports are decided by the magnitude and phase of the input signal. This paper analyzes the output signal characteristic of two output ports due to the input signal magnitude and phase of two input ports using the typical 4-port coupler circuit, Branchline hybrid coupler and Ring-hybrid coupler. And, it studies about new way to use branchline hybrid coupler and ring-hybrid coupler on the basis of the this information.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.9
• /
• pp.5-15
• /
• 2015

In this study, rainfall-induced slope stability and coupling effect are investigated using hydro-mechanical finite element model. This model is developed by formulating constitutive and coupled balance equations and is verified by comparing the numerical results with field matric suction. The homogeneous soil layer (soil column) and soil slope are modeled by this model, and the results of variation in matric suction, mean effective stress, porosity, displacement, factor of safety are compared with those of staggered analysis. It is found that the vertical and horizontal displacement from coupling analysis considering change in porosity is larger than that of staggered analysis. The displacement and matric suction from coupling analysis by rainfall infiltration can affect slope instability, which shows a progressive failure behavior. The lowest factor of safety is observed under short-term rainfall. This results confirm the fact that coupling analysis is needed to design soil slope under severe rain condition.

• Journal of KIISE:Software and Applications
• /
• v.36 no.11
• /
• pp.891-900
• /
• 2009

The priority of software maintenance researches has been increasing, since the lengths of software lifecycle are more increasing. Measuring couplings among software entities provides a good quantitative source for analyzing source code and point out candidate refactoring positions. Logical-coupling measures how strongly two software entities are related with each other from the evolutionary point of view. The researches on logical-coupling have been focusing on improving the correctness and explaining more aspects that are hiding by measuring logical-coupling among finer-grained entities. However, existing researches on logical-coupling fails to consider characteristics of developers and projects reflected in transactions. The research proposes a logical-coupling measurement method based on transaction time, size and expertise of developer to improve the correctness by considering characteristics of developers and projects reflected in transactions. The method has been validated by applying it to three open-source projects.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.4
• /
• pp.635-650
• /
• 2017

Acoustic emission (AE) sensors have broadly used to monitor the damage of underground structures and tunnels. The reliability of measured signal is determined by the coupling condition of the AE sensors which are embedded in the target underground structure. To secure the reliability of health monitoring results, it is important to understand the characteristics of the coupling materials. In this study, laboratory tests were performed using portland cement, micro cement, and gypsum as coupling materials in order to verify the bleeding characteristics. The effective parameters for bleeding were determined to be water-cement ratio, material type, curing time, and injected volume of coupling materials. As a results of the experimental study, the bleeding rate increases with an increase in a water-cement ratio and an injected volume; for portland cement, water-cement ratio and injected volume effects are larger than the micro cement. However, curing time is not much effective for occurrence of the bleeding phenomenon. It is anticipated that this study may be useful for the selection of suitable coupling materials for installation of acoustic emission sensors.