• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1170-1174
• /
• 2014

추진기에서 캐비테이션이 발생되면 효율이 저하되고 진동과 소음이 발생한다. 소음은 캐비테이션이 처음으로 발생되는 시점부터 크게 증가되므로 캐비테이션 초생속도(CIS)를 가능한 높이는 것이 중요하다. 본 논문에서는 가변추진기의 캐비테이션 초기발생 현상을 확인하기 위하여 처음으로 캐비테이션 실선관측을 수행하였다. 관측 결과 가변추진에서 캐비테이션 초기발생은 볼트 캐비테이션으로 확인되어 볼트부위를 개선한 새로운 형상의 가변추진기를 제안하였다. 개선된 가변추진기에서는 볼트 캐비테이션이 전혀 발생되지 않았으며, CIS는 개선 전 가변추진기 보다 약 4.5 노트 향상된 것을 확인하였다. 본 연구 결과는 향후 저소음 가변추진기 개발과 CIS 성능 향상에 매우 유용한 자료로 활용될 것이다.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.259-264
• /
• 2014

Tip vortex cavitation (TVC) is important for naval ships and research vessels that require raising the cavitation inception speed to maximum possible values. The concepts for alleviating the tip vortex are summarized by Platzer and Souders (1979), who carried out a thorough literature survey. Active control of TVC involves the injection of a polymer or water from the blade tip. The main effect of such mass injection (both water and polymer solutions) into the vortex core is an increase in the core radius, consequently delaying TVC inception. However, the location of the injection port needs to be selected with great care in order to ensure that the mass injection is effective in delaying TVC inception. In the present study, we propose a semi-active control scheme that is achieved by attaching a thread at the propeller tip. The main idea of a semi-active control is that because of its flexibility, the attached thread can be sucked into the low-pressure region closer to the vortex core center. An experimental study using a scale model was carried out in the cavitation tunnel at the Seoul National University. It was found that a flexible thread can effectively suppress the occurrence of TVC under the design condition for a model propeller.

• 대한조선학회논문집
• /
• 제48권1호
• /
• pp.1-7
• /
• 2011

Cavitation is the formation of vapour bubbles of a flowing liquid in a region where the pressure of the liquid falls below its vapor pressure. Various types of cavitations are generated on the propeller blades. As cavity bubbles passing the blade are forced to oscillate in size or shape and come to collapse, they cause very strong local acoustic waves in the fluid and radiate noise. Comparing the Sound Pressure Level(SPL) before and after cavitation, SPL increases 2dB per 1 knot increase in ship speed above the cavitation inception speed(CIS). Consequently, the CIS is an important criteria to design silent propellers. In this work, experimental measurements of radiated noise according to various types of cavitations from the model propeller are carried out in a large cavitation tunnel and their acoustical characteristics are extensively investigated.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.505-513
• /
• 2017

Cavitation is a phenomenon caused by vapour cavities that is produced in rapid pressure changes. When the cavitation happened, the sound pressure level of a underwater radiated noise is increased rapidly. As a result, it can increase the probability of the identification or classification of a our warship's acoustic signature by an enemy ship. However, there is a problem that it is hard to precisely detect the occurrence of a cavitation noise. Therefore, this paper presents recent improvements in terms of the cavitation noise measurement by using continuous wavelet transform and DEMON(Detection of Envelope Modulation on Noise) signal processing. Then, we present that the suggested scheme is more suitable for detecting the cavitation than existing algorithms.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.770-775
• /
• 2010

As considerable interests in noise emission from the ships have been increased, control of the propeller cavitation generating vibration and radiating noise is looming large. In general, the tip vortex cavitation is first produced in case of full scale propellers, and noise levels rise dramatically from that moment. In order to reduce induced noise from the tip vortex cavitation and hence increase the cavity inception speed, we propose the mass injection method. Water injected from the propeller tip decreases rotating speed of the tip flow, and it restrains growing the tip vortex cavity. Experimental investigations of the model tests carried out in a large cavitation tunnel show that the tip vortex cavitation is effectively controled by water injection from the propeller tip.