• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.672-676
• /
• 2005

To improve the application of polymeric dental restorative composite (PDRC) for the posterior and anterior restoration, silica bridged with siloxane unit was firstly prepared by heat-treating a silica filler at various temperatures. Degree of conversion (DC), depth of cure, and dynamic volumetric polymerization shrinkage values of PDRC filled with silica bridged with siloxane unit were investigated to study the effect of heat-treated silica on the polymerization behavior of PDRC. From the experimental result, it was found that depth of cure was decreased with an increase of heat treatment temperature. on the other hand, both DC and polymerization shrinkage values were uniformly enhanced with increasing the heat treatment temperature. This phenomenon can be explained from the study that showed decrease of average particle size of silica resulted in the increase of relative amount of resin matrix in PDRC.

• Journal of the Korean School Mathematics Society
• /
• v.11 no.1
• /
• pp.19-30
• /
• 2008

Cavalieri is chiefly remembered for his work on the problem "indivisibles." Building on the work of Archimedes, he investigated the method of construction by which areas and volumes of curved figures could be found. Cavalieri regarded an area as made up of an indefinite number of parallel line segments and a volume of an indefinite number of parallel plane areas. He called these elements the indivisibles of area and volume. Cavalieri developed a method of the indivisibles which he used to determine areas and volumes. We call this Cavalieri's principle which states that there exists a plane such that any plane parallel to it intersects equal areas In both objects, then the volumes of the two objects are equal. Cavalieri's principle and method of the indivisibles are very important to understand of volume of a pyramid for gifted students.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.107-113
• /
• 2015

The effects of silica-silane in CIIR vibration isolation compound were investigated regarding mechanical and dynamic properties. Addition of silica-silane in the compound resulted in higher tear resistance strength and elongation at break than the control, which was increased by 13% and 14%, respectively. Other values such as tensile strength and hardness did not show significant changes. Viscoelastic property results supported that the improvement of tear resistance strength and elongation at break resulted from the formation of 3-dimensional network structure between silica and CIIR. The mechanism of the tear resistance strength and elongation at break improvement was discussed.

• Resources Recycling
• /
• v.24 no.1
• /
• pp.3-11
• /
• 2015

Soluble silica generated from acid leaching process is very difficult to filter and deceases the purity of products, and thus becomes one of hot issues in hydrometallurgy. This paper reviewed the dissolution and reactivities of silicates in acid solution, and the methods for treatment of soluble silica. Removal of silica with alkaline pre-treatment, crystallization to $SiO_2$ and precipitation behaviour of silica with coagulation under acid conditions were briefly described.

• Elastomers and Composites
• /
• v.49 no.1
• /
• pp.66-72
• /
• 2014

Carbon coating on silica particles is done by grafting expanded graphite on the silica aggregates. Successful coating of carbon is corroborated using FT-IR, TGA, XPS and TEM. Crystalline nature of coated graphite is corroborated using XRD. Influence of carbon coated silica particles on rheometric and mechanical properties of SBR composites are investigated. Carbon coated silica particles showed significant improvement in rheometric and mechanical properties, when compared to pristine silica filled system corroborating higher polymer-filler adhesion. This fact was further supported by bound rubber content and equilibrium swelling ratios of unvulcanized and vulcanized SBR composites.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.159-162
• /
• 2004

플라즈마 공정 모델 개발에 역전파 신경망이 가장 많이 응용되고 있으나, 관여하는 다수의 학습인자로 인해 그 최적화가 매우 어렵다. Radial basis function network (RBFN)은 관여하는 학습인자의 수가 적어 그 최적화가 상대적으로 용이하지만, 두인자의 다양한 조합에 의해 RBFN의 예측성능이 상당히 영향을 받을 수 있다. 본 연구에서는 학습인자 상호간의 작용을 유전자 알고리즘 (genetic algorithm-GA)을 이용하여 최적화하는 기법을 소개한다. 제안하는 알고리즘을 광도파로 제작을 위해 수행한 실리카 식각공정 데이터에 적용하여 평가하였다. 평가에 이용된 식각 응답은, 실리카 식각률, aluminum (Al) 식각률, Al 선택비, 그리고 실리카 프로파일 각도이다. 최적화한 모델은 종래의 모델과 비교하였으며, 그 향상도는 실리카 식각률, Al 식각률, Al 선택비, 그리고 실리카 프로파일 각도에 대해서 각 기 0.8%, 32.4%, 20.3%, 1.3% 등이었다. Al 식각률과 선택비에 대해서 예측성능은 상당이 향상되었다.

• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.183-187
• /
• 2007

$SiO_2/TiO_2$ core-shell particles with controlled shell thickness were prepared using large silica particles. The thickness of titania coating layer was varied from 8 nm to 38 nm depending on the number of coating steps from 1 to 3 times. After titania coating, the core-shell particles showed textured surface due to the titania coating layer, resulting in 3~25 times increase of specific surface areas. The properties of titania coated silica particles were characterized by FE-SEM, Zeta potential meter, BET, and XRD.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.182-185
• /
• 2008

최근 새로운 천연가스 수송/저장법으로 가스 하이드레이트 형성법이 주목받고 있다.본 연구에서는 천연가스의 저장 매체로 다공성 매질인 실리카 젤을 사용하였다. 다공성 실리카 젤을 사용할 경우 물과 기체의 접촉면적을 극대화 시킬 수 있어 가스하이드레이로의 전환율을 높일 수 있다. 본 연구에서는 천연가스 주성분인 에탄과 프로판 기체를 사용하였으며, 기공의 직경이 각각 6.0 nm, 15.0 nm, 30.0 nm, 100.0 nm의 다공성 실리카 젤을 사용하였다. 에탄은 270 $\sim$ 285 K의 온도범위와 9 $\sim$ 25 bar의 압력범위, 프로판은 260 $\sim$ 280 K의 온도범위와 1.8 $\sim$ 2.8 bar의 압력범위에서 기공 크기의 분포를 고려하여 하이드레이트(H)-물($L_W$)-기상(V)의 3상 평형점을 측정하였다. 측정 결과 기공의 크기가 작아질수록 각각의 벌크 상태의 에탄 및 프로판 하이드레이트에 비해 하이드레이트의 평형조건이 온도는 낮아지고 압력이 높아지는 저해효과가 커짐을 알 수 있었다. 천연가스 수송/저장으로서 응용을 고려할 경우 저해효과가 적은 100.0 nm이상의 다공성 실리카 젤을 사용하는 것이 적절할 것으로 사료된다. 본 연구에서 얻어진 결과는 천연가스 수송/저장뿐만 아니라 심해저 천연가스 개발, 이산화탄소 심해저장 등의 가스 하이드레이트 용용 연구에도 유용한 기초 자료가 될 것이다.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.754-761
• /
• 2017

UV-curable hydrophilic coating solutions were prepared by mixing colloidal silica dispersed in alcohol with an acrylic monomer, pentaerythritol triacrylate (PETA). Hydrophilic coating films were also prepared by spin coating the hydrophilic coating solutions on PC substrates and UV curing for 10 minutes subsequently. The effect of the amount of colloidal silica in the coating solutions, which was varied from 10 g to 50 g, was investigated on the hydrophilic properties of UV-cured coating films. The results showed that the amount of colloidal silica had a great influence on the hydrophilic properties of UV-cured coating films and the coating film prepared with 30 g of colloidal silica showed a lowest contact angle of $37^{\circ}$ and an excellent pencil hardness of H.

• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.487-493
• /
• 2004

The distribution of particles, in the mixture of poly(ethyl acrylate-co-t-butyl acrylate) (PEB) emulsion polymer and silica nanoparticles, was determined mainly depending on the pH of the mixture. The weak interfacial interaction was responsible for the severe coagulation of silica particles and the irregular dispersion for these nanocomposites. Methacryloxypropyltrimethoxysilane (MPS) was used to modify both the polymer and the silica. The nanocomposites which were prepared with these modified components had finer dispersion of silica nanoparticles and core-shell morphology due to the strong interfacial interaction. The strong hydrogen bonds were identified for these nanocomposites with FT-IR. The nanocomposites having strong interfacial interaction showed the increased glass transition temperature, the decreased ΔC$_{p}$ , and the increased decomposition temperature of the polymer chains. polymer chains.