• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3B
• /
• pp.265-276
• /
• 2011

Precipitation data and groundwater level data were collected for Korean peninsular and Jeju island. The relationship between precipitation and groundwater level and the correlation between the moving average of precipitation and goundwater level were analyzed. Critical infiltration, which is the spatially averaged maximum daily infiltration depth over interested region, is considered when the precipitation data was modified for moving average process and correlation between the moving average of modified precipitation and groundwater level. High correlation regions, which have greater than 0.6 correlation coefficients, were selected after the analysis with ciritical infiltration. Twenty-six regions were selected for high correlation regions. If we divide the regions by administrative district, there are nine regions for Gyungsang-Do, five regions for Chunchung-Do, four regions for Gyunggi-Do and Gangwon-Do, three regions for Jolla-Do, and one region for Jeju island. The groundwater level data for high correlation regions shows obvious response after precipitation event and there are few cases with abrupt change in groundwater level without precipitation-related event.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.179-190
• /
• 2003

The grout based on solution type makes it difficult to get the improvement of ground strength and the effefct of water curtain because it has lower strength and durability than suspension type. Nowadays, the technology of particle acceleration, that enhance the material permeability, such as grout based on solution type, and inexpensive grout, is being required. For these reasons, in this study, using wet milling system, we evaluated physical properties of manufactured factors such as water-cement ratio of particles before being milled, optimum milling capacity by controlling milling time and rpm, viscosity of materials, permeation coefficient, and unconfined compressive strength. Also, using micro wet milling apparatus which could manufacture ordinary Portland cement and high speed shear mix which could forcefully separate conglomerate particles in situ, we performed electrical resistivity investigation and falling head permeability tests to analyze differences of grouting effects. From these results, we found that the permeability of the applied equipment was much superior, and in the case of using high speed shear mixer, particles of grout material were well separated.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.465-465
• /
• 2011

강우가 발생하거나 관개를 함에 따라 농경지의 토양침식물, 잔류 비료나 농약 등의 비점오염원은 지표 및 지하 유출과 함께 거동함으로써 지표수 뿐 아니라 지하수 수질에도 영향을 미칠 수 있다. 특히, 최근 고부가가치 농산물 수요의 증가로 전국적으로 시설재배 농업이 확대되고 있으나 시설재배 내에서의 비점오염원 유출특성에 관한 연구는 미흡하다. 따라서 시설재배 농업과 관행농업의 비점오염원의 거동 및 지하침투 오염부하를 비교 평가하고 비점오염원을 저감하기 위한 적절한 방안 마련이 필요하다. 따라서 본 연구에서는 시설 및 관행재배 지역의 지하침투 오염부하량을 평가하기 위하여 주변 영향이 배제되어 시설재배와 관행재배의 비교 평가 가능한 포장 및 광역 단위 시험포장을 선정하고 모니터링 시스템을 구축하였다. 먼저 필지 단위와 광역 단위 단위에서의 모니터링 시스템을 설계하고, 수문 및 수질 분석 항목을 설정하였다. 이를 바탕으로 관행재배지에서의 물수지 모니터링을 위하여 기상 및 강우량, 지하수위, 토양수분, 관개 및 배수량을 측정하기 위한 장비를 설치하고, 토양수 및 지하수의 물질 수지 분석을 분석하기 위한 토양수, 지하수, 논담수 등의 수질 샘플망을 구축하였다. 또한 시설재배지에서의 물수지 모니터링을 위하여 기상, 지하수위, 토양수분 및 관개량을 측정하기 위한 장비를 설치하고, 토양수 및 지하수의 물질 수지 분석을 분석하기 위한 토양수, 지하수, 관개용수 등의 수질 샘플망을 구축하였다. 향후 본 시험 포장에 대한 지속적인 모니터링과 샘플링 실시하여 다양한 항목에 대한 조사 및 분석이 이루어진 다면 시설재배지 비점오염원 모니터링 및 정량화 기술개발을 통해 시설재배지에서의 비점오염에 대한 정량적 자료구축이 가능할 것으로 판단되며, 기초적인 자료를 제공함으로써 국내 농업비점오염총량 추정 기술에 기여할 수 있을 것으로 판단된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.5
• /
• pp.66-74
• /
• 2016

The objective of this study is the investigation of the influence of carbonation on the penetration of chloride ions in reinforced concrete sections for different mix proportions and environmental conditions. A comprehensive numerical model based on the change of the pore structure and the chemical equilibrium was used for this combined action of carbonation and chloride ingress. The empirical formulae of some parameters in this model are estimated according to numerous experimental data. And, a set of data analysis is carried out to simplify the estimation of model variables to reduce the computational cost. A coupled simulation of the transports of carbon dioxide, chloride ions, heat and moisture is carried out. Then, the parametric analysis is given and the numerical results show that the effect of carbonation of the free chloride ingress is significant and depends on the binder types and concrete mix proportion.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.117-126
• /
• 2011

Based on thermodynamics, the mathematical framework governing the hydro-mechanical behavior of partially saturated soil is derived by using balance equations, and the numerical analysis through implementation of various effective stress definitions is performed. Effective stress on partially saturated soil describes the soil strength which is presented by the relationship between water content and soil suction. For the estimation of hydro-mechanical behavior on partially saturated soil, effective stress parameter ${\chi}$ defined from various literatures is especially analyzed to understand the conditions of constitutive equations regarding residual saturation and displacement of soil. As a result, effective stress parameter ${\chi}$ has an influence on the variation of matric suction in soil with an external load and seepage. However it was found that the effect of each parameter ${\chi}$ varies with residual degree of saturation, and that of each parameter ${\chi}$ decreased with decrease in displacement of soil caused by an external load.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.6
• /
• pp.547-556
• /
• 2011

The primary factors affecting concrete sulfate resistance are the chemical composition of the Portland cement, and the chemistry and quantity of mineral admixtures. To investigate the effect of those on the sulfate attack, the testing program involved several different mortar mixes using the standardized test, ASTM C1012. Four different cements were evaluated, including one Type I cement, two Type I-II cements, and one Type V cement. Mortar mixes were also made with mineral admixtures, as each cement was combined with three different types of mineral admixtures. One Class F fly ash, one Class C fly ash, and one ground granulated blast furnace slag (GGBFS) were added in various percent volumetric replacement levels. Expansion measurements were taken and investigated with the expansion criteria recommended by ASTM.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.1
• /
• pp.47-62
• /
• 2001

An experimental study was peformed to provide the numerical models to predict the physical fate of marine debris with the key information concerning their trifling and sinkage on the sea. For hygroscopic materials their floating times in a pseudo ocean environment were measured, and for non-hygroscopic objects their drifting limes in a certain wave condition were measured. For sinking materials or objects became to be sinkable free falling experiment was performed to evaluate their falling speed. Summarized information was condensed into a numerical model to predict the most possible region of a significant marine debris accumulation, and the seas connected to the Han river and the Nak-Dong river were considered for the simulation.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.183-189
• /
• 2020

Developing countries are areas where many problems arise from poor drinking water infrastructure. Developing countries often use groundwater as their primary source of drinking water, which causes problems. Among them, coastal areas are easily exposed to saltwater intrusion due to their geographical characteristics. Groundwater in areas exposed to saltwater intrusion has higher salinity than usual. If you continue to consume high salinity groundwater can cause a variety of fatal effects on the human body. Therefore, various alternatives have been proposed. This study explores the applicability of CDI(Capacitive Deionization) and RO(Reverse Osmosis) for water purification systems in areas where saltwater intrusion has occurred. Therefore, we will evaluate this by conducting water purification experiment. On the other hand, the supply of electricity is also important in the operation of water purification facilities. However, in many areas of developing countries, electricity is often not available. Therefore, this study intends to calculate the power consumption required for the actual use of the filter and to include it in the evaluation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.10
• /
• pp.25-34
• /
• 2002

In this paper, silicidation induced Schottky contact area was obtained using the current voltage(I-V) characteristics of shallow cobalt silicided p+-n and n+-p junctions. In reverse bias region, Poole-Frenkel barrier lowering influenced predominantly the reverse leakage current, masking thereby the effect of Schottky contact formation. However, Schottky contact was conclusively shown to be the root cause of the modified I-V behavior of n+-p junction in the forward bias region. The increase of leakage current in silicided n+-p diodes is consistent with the formation of Schottky contact via cobalt slicide penetrating into the p-substrate or near to the junction area and generating trap sites. The increase of reverse leakage current is proven to be attributed to the penetration of silicide into depletion region in case of the perimeter intensive n+-p junction. In case of the area intensive n+-p junction, the silicide penetrated near to the depletion region. There is no formation of Schottky contact in case of the p+-n junction where no increase in the leakage current is monitored. The Schottky contact amounting to less than 0.01% of the total junction was extracted by simultaneous characterization of forward and reverse characteristics of silicided n+-p diode.

• The Journal of Engineering Geology
• /
• v.18 no.1
• /
• pp.83-92
• /
• 2008

In order to analyze infiltration characteristics of rainfall in soil, two laboratory experiments were conducted using an amplitude domain reflectometry (ADR) sensor and a pore water pressure meter (PWP) in this study. The first experiment is to understand the dependency of volumetric water content and temperature for standard sand and weathered granite soil. The second experiment is a laboratory flume test with changes of rainfall condition. As the results of the dependency experiment, the volumetric water content is increased with increase of the output voltage measured by the ADR sensor in both the standard sands and weathered granite soil. Furthermore, the results also indicate necessity of consideration of the temperature dependency under the condition of high volumetric water contents from 0.15 to 0.45. In the flume test, two measurement devices are detected to the variation of volumetric water content and pore water pressure at the installation point of the flume. In especial, the measured values of ADR4 and PWP3 installed on the lower part of slope are higher than those of the others. It means that the lower part of slope plays a role of a runoff face and a beginning point of slope failure.