• Journal of the Korean Geotechnical Society
• /
• v.25 no.4
• /
• pp.91-103
• /
• 2009

Slope failure depends upon the climatic features related to related rainfall, structural geology and geomorphological features as well as the variation of the mechanical behaviors of soil constituting a slope. In this paper, among many variables, effects of soil layer thickness on the slope failure process, and variations of matric suction and volumetric water content were observed. When the soil layer is relatively thick, the descending wetting front decreases matric suction and the observed matric suction reaches to "0" value. When the wetting front reaches to the impermeable boundary, the bottom surface of steel soil box, ascending wetting front was observed. This observation can be postulated to be the effects of various sizes of pores. When macro size pores exist, the capillary effects can be reduced and infilling of pore will be limited. The partially filled pores would be filled with water during the ascending of the wetting front, which bounces from the impermeable boundary. This assumption has been assured from the observation of variation of the volumetric water contents at different depth. When the soil layer is thick (thickness = 20 cm), for granular material, erosion is a cause triggering the slope failure. It has been found that the initiation of erosion occurs when the top soil is fully saturated. Meanwhile, when the soil layer is shallow (thickness = 10 cm), slope slides as en mass. The slope failure for this condition occurs when the wetting front reaches to the interface between the soil layer and steel soil box. As the wetting front approaches to the bottom of soil layer, reduction of shear resistance along the boundary and increase of the unit weight due to the infiltration occur and these produce complex effects on the slope failure processes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.82-91
• /
• 2003

Experiments to investigate the mixing performance of unlike doublet impinging jets are conducted. Reynolds number of simulants used in this study rages from 1.0 to 1.5 Cold flow test is performed to investigate the hydrodynamic effect and spray of the impinging jets are collected locally and calculated by using Rupe's mixing efficiency equation. Momentum exchanges and relative velocity ratio between two jets are taken as the main parameter to represent the effect of enlargement of the orifice diameter. As diameter ratio increases, the corresponding momentum ratio where maximum mixing efficiency occurs and relative velocity at the maximum mixing efficiency ranges 0.6 to 0.7, respectively. Penetration depth can be taken as a prominent parameter to estimate the mixing efficiency.

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.81-89
• /
• 2018

In the present study, a numerical investigation was conducted to analyze the effect of the distance between the adjacent injectors on the characteristics of flow structure, fuel penetration, and air/fuel mixing. Numerical results were validated with experimental data using a single injection. Subsequently, the same injector geometry and properties were applied on a non-reacting flow simulation with multiple injectors. Total pressure loss, penetration height, and mixing efficiency were compared with the distance between the injectors. The results showed that each injected gas merged into a single stream, resulting in the 2D-like flow fields under the condition of short distance and lower mixing efficiency along with higher total pressure loss. When the distance between the injectors increased, total pressure loss reduced and mixing efficiency increased due to the weakening of interactions between the injected gases.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.159-170
• /
• 2003

In this study, the mixed design of grout with hish strength.high permeation.high durability and environmental stability as the state of the art in material field was performed. Also, the subjects of grouting, grouting effects for ground conditions, and environmental effects were analyzed. According to these results, the fundamental data will be suggested as a design of grouting in the field application. The physical, mechanical and chemical characteristics with particle shape of the grouts were analyzed. Then, the gel-time of grouts, which is essential for workability and permeation range, were controlled. Also, the laboratory model grouting tests were performed to find the characteristics of solidification, permeation and durability with grouts. The ordinary portland, slag and microcement which have been used in the construction field were evaluated fur the environmental effects. To find the leaching of $Cr^{6+}$characteristics in cement grouts, $Cr^{6+}$ leaching tests were performed for the raw materials. Also, the results of leaching test were shorn by surrounding environment. Then, the unconfined compression strength tests were performed with the homo-gel samples, and the amount of changed $Cr^{6+}$ was measured by curing solution.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.25-31
• /
• 2020

Experimental investigations were conducted to examine the combustion characteristics of a swirl-stabilized double cone premixed burner nozzle used for industrial gas turbines for power generation. Several variants with different fuel injection patterns are tested to compare the combustion characteristics such as NOx and CO emissions, stability, and wall temperature distributions. Main results show that NOx emissions and stability are decreased either when the fuel hole diameter is decreased with the same number of fuel holes, or when the number of fuel holes is reduced with the same total area of fuel holes, both of which are due to a higher penetration of fuel into the air stream. Not only is NOx reduced but also stability is enhanced when the fuel hole diameter varies in an alternating manner with the same total area of fuel holes, showing that NOx reduction is due to a higher penetration of mean fuel injection path while stability enhancement is due to a lowered penetration of minimum fuel injection path.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.344-344
• /
• 2022

최근 기후변화에 따른 집중호우, 태풍의 규모 및 빈도가 증가하고 있다. 도시지역은 전통적인 배수체계가 한계에 도달함에 따라 기후변화에 대한 취약성이 다른 지역에 비하여 더욱 크게 나타나 기후변화에 효과적으로 적응하기 위한 방안으로 도심녹지, 빗물정원, 투수포장 등 그린인프라 확충의 중요성이 부각되고 있다. 본 연구에서는 도시하천 유역 내 그린인프라 확충에 따른 강우유출특성의 변화를 살펴보고자 하였다. 그린인프라의 확충은 불투수층을 투수층으로 변화시켜 물순환 건전화에 기여한다. 본 연구에서는 부산의 대표적인 도시하천 유역인 온천천유역을 대상으로 강우유출모형인 HSPF를 적용하여 유역 내 투수층 증가에 따른 유출특성의 변화를 살펴보았다. 온천천 유역을 세 개의 소유역(온천천 상류, 세병교, 온천천 하류)으로 구분하고 현재 상황(불투수면적비 각각 90.98, 92.96, 94.25%)에서 불투수면적을 10%씩 감소시켜가며 유역 내 지표유출량, 침투량의 변화를 살펴보았으며, 온천천 유량(갈수량, 저수량, 평수량, 풍수량, 홍수량)의 변화를 분석하였다. 분석 결과 유역 내 불투수면적 감소에 따라 강수의 침투가 증가하고 이에 따른 지표유출이 감소함을 확인할 수 있었다. 유역 내 불투수층이 감소함에 따라 지표유출량은 최대 32%까지 감소하고 침투량은 최대 71%까지 증가하는 것으로 나타났다. 또한 온천천의 갈수량, 저수량, 평수량, 풍수량은 증가하는 반면, 홍수 시의 유량을 의미하는 홍수량은 최대 15% 이상 감소하는 것을 알 수 있었다. 이는 유역 내 불투수층의 감소를 통해 평상시에는 추가적인 하천유량 확보가 가능하며, 홍수 시에는 반대로 홍수량을 저감시킴으로써 이에 따른 피해를 줄일 수 있음을 의미한다. 본 연구를 통해 그린인프라가 하천유량 확보 및 홍수량 저감을 통해 유역의 물순환 건전화에 긍정적인 영향을 미치는 것을 알 수 있었다. 따라서 효과적인 기후변화 적응을 위해 도시하천 유역의 그린인프라 확충을 위한 노력을 기울일 필요가 있다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.485-500
• /
• 2018

The behavior of cement-based permeation grouting is divided into three different groups depending on the grain size distribution of the soils: (1) zone of cement-based permeation grouting not feasible; (2) zone of cement-based permeation grouting feasible; and (3) zone in which an accelerating agent should be added to limit the penetration depth. In the cement-based permeation grouting feasible zone, the concept of a representative pore radius was proposed. The ratios of the representative pore radius to the mean pore radius were obtained by performing laboratory test and comparing with clogging theory; these values were in the range of 1.07 and 1.35 depending on the grain size distribution of the soils. In addition, a functional relationship between the lumped parameter (${\theta}$), the representative pore radius and the w/c ratio were derived by comparing and matching experimental results with predictions from theory. In the zone in which the accelerating agent should be added, the controlling process of gel time to limit the penetration depth was experimentally verified. The test results matched well with those obtained from theory utilizing the developed grout penetration program on condition that the viscosity increasing tendency of grout suspension with time is properly taken into account.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.10
• /
• pp.69-80
• /
• 2011

In this study unsaturated seepage analysis of 8 large rockfill dam managed by Korea Water Resources Corporation, were carried out, and the seepage rate of rockfill dam was analyzed by changing reservoir water level, shape, saturated and unsaturated seepage properties of core zone to present an equation to estimate steady-state seepage rate of rockfill dam. This equation considers unsaturated seepage flow and is applicable to domestic large scale Rockfill dam with the height of more than 50m. Estimated values by the proposed equation are greater than those by the method of Sakamoto (1998), which does not consider unsaturated seepage flow. The difference of estimated values increases with the lower reservoir water level and decreases with the higher reservoir water level. We can be sure that the comparison between the measured seepage rate and the estimated seepage rate by the proposed equation for the existing rockill dam was well-matched. The proposed equation is close to the actual phenomenon compared with the existing equations (Sakamoto, 1998; Chapuis and Aubertin, 2001) because it is based on the results of unsaturated seepage analysis of dams, has upstream and downstream slopes in the range of 1Vertical: (0.2~0.3)Horizontal.

• Geophysics and Geophysical Exploration
• /
• v.5 no.1
• /
• pp.56-63
• /
• 2002

Tracing the history of study, problems of seawater intrusion are commonly investigated with electrical techniques because seawater saturated zone is indicative of the low resistivity anomaly. There we, however, silt and mud layers in the western and southern coastal areas of Korea, so we may make a mistake in case we determine seawater intrusion only with resistivity survey. Hence, reference IP survey was carried out in Kimje, Jeollabuk-Do and Youngkwang, Jeollanam-Do in order to decide whether or not the area is under the influence of seawater intrusion. With the use of a electric field cable to minimize EM coupling, we obtained more accurate results by appling reference If technique measuring simultaneously wavelet of current as well as potential. With the aid of reference IP technique, it is possible that we can exactly evaluate seawater intrusion by discriminating seawater saturated area (no IP effect) from very highly conductive layer composed of clay mineral (high IP effect).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.461-461
• /
• 2017

기후변화 적응 유역 물순환 개선 기술은 기후변화가 진행 중에 있거나 예상되는 지역에 대하여 강우-유출수를 지연, 저류, 침투시켜 지속가능한 물순환체계를 유지 회복하도록 하는 기술이라 할 수 있다. 본 연구에서는 기후변화에 따른 국내 유역의 특성 및 기후를 반영하기 수월한 물순환 개선 및 평가시스템을 국내 기술로 개발하였다. 개발된 유역 물순환 개선 및 평가시스템은 기존 국가연구개발사업을 통해 개발되고 사업화에 성공한 바 있는 유역 물순환 평가 모형인 CAT(Catchment hydrologic cycle Assessment Tool)을 수정 및 개선하여 기후변화에 따른 영향을 평가하고 적응 대책을 수립하기 위한 실무적인 소프트웨어이다. 침투트렌치, 식생침투트렌치, 습지, 저류지, 빗물탱크 등의 물순환개선시설에 대한 효과를 평가할 수 있도록 개별시설의 제원에 따른 물순환개선 효과를 정량적으로 평가할 수 있다. 본 연구의 대상유역으로는 팔당댐 상류의 경안천 유역을 선정하였다. 경안천 유역의 기후변화에 따른 물순환 개선 기술 적용을 위해서 기후변화 시나리오 자료는 기상청 수원 측후소의 1976~2099년 FGOALS-s2, HadGEM-ES, INM-CM4 RCP8.5 시나리오를 적용하였으며 분석기간은 2020s(2010~2039), 2050s(2040~2069), 2080s(2070~2099)로 구분하였다. Baseline은 수원 측후소 과거 30년 1971~2000년 자료를 이용하였고 각 시나리오별 수문성분 및 구조적 물순환 개선기술 적용에 따른 수문성분을 비교 분석하였다. 물순환 개선기술 시나리오 중 침투시설 시나리오는 도시 면적의 20%, 설계침투량은 일본 우수저류침투기술협회 기준인 단위면적($1m^2$)당 10mm 적용하였고, 빗물저장시설 시나리오의 저장시설의 용량은 수도법시행규칙(2011)의 빗물 이용시설기준(도시면적 ${\times}0.05$)을 적용하였다. 시나리오별 강우량은 HadGEM-ES가 증가폭이 크게 나타났고 INM-CM4는 2080s에서 감소 경향을 보였다. 증발산량은 거의 모든 시나리오에서 대부분 감소하였고, 개선기술 적용에 따라 크게 증가하거나 감소폭이 줄어들었다. 직접유출량 및 중간유출량은 기후변화 시나리오별 강우증가분에 따른 미세한 증가 양상을 보였고, 개선기술 적용에 따라 약간 증가하는 양상을 보였다. 지하수유출량의 경우 침투시설 적용으로 함양량이 크게 증가함에 따라 증가폭이 매우 크게 나타났다.