• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.100-109
• /
• 2002

Significant damage to concrete results from the intrusion of corrosive solutions, for example, dissolved chlorides corrode reinforcing steel and cause spatting. Effectively blocks the penetration of these solutions will eliminate or greatly reduce this damage and lead to increased durability. This study is to investigate the effects of pozzolanic admixtures, fly ash and silica fume, and a blast furnace slag on the chloride ion penetration of concretes. The main experimental variables wore the water-cementitious material ratios, the types and amount of admixtures, and the curing time. And it is tested for the porosity and pore size distributions of cement paste, chloride ion permeability based on electrical conductance, and 180-day ponding test for chloride intrusion. The results show that the resistance of concrete to the penetration of chloride ions increases as the w/c was decreased, and the increasing of curing time. Also, concrete with pozzolans exhibited higher resistance to chloride ion penetration than the plain concrete. The significant reduction in chloride ion permeability(charge passed) of concrete with pozzolans due to formation of a discontinuous macro-pore system which inhibits flow. It is shown that there is a relationship between chloride ion permeability and depth of chloride ion penetration of concrete, based on the pore structure (porosity and pore size distributions) of cement paste.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.461-461
• /
• 2017

기후변화 적응 유역 물순환 개선 기술은 기후변화가 진행 중에 있거나 예상되는 지역에 대하여 강우-유출수를 지연, 저류, 침투시켜 지속가능한 물순환체계를 유지 회복하도록 하는 기술이라 할 수 있다. 본 연구에서는 기후변화에 따른 국내 유역의 특성 및 기후를 반영하기 수월한 물순환 개선 및 평가시스템을 국내 기술로 개발하였다. 개발된 유역 물순환 개선 및 평가시스템은 기존 국가연구개발사업을 통해 개발되고 사업화에 성공한 바 있는 유역 물순환 평가 모형인 CAT(Catchment hydrologic cycle Assessment Tool)을 수정 및 개선하여 기후변화에 따른 영향을 평가하고 적응 대책을 수립하기 위한 실무적인 소프트웨어이다. 침투트렌치, 식생침투트렌치, 습지, 저류지, 빗물탱크 등의 물순환개선시설에 대한 효과를 평가할 수 있도록 개별시설의 제원에 따른 물순환개선 효과를 정량적으로 평가할 수 있다. 본 연구의 대상유역으로는 팔당댐 상류의 경안천 유역을 선정하였다. 경안천 유역의 기후변화에 따른 물순환 개선 기술 적용을 위해서 기후변화 시나리오 자료는 기상청 수원 측후소의 1976~2099년 FGOALS-s2, HadGEM-ES, INM-CM4 RCP8.5 시나리오를 적용하였으며 분석기간은 2020s(2010~2039), 2050s(2040~2069), 2080s(2070~2099)로 구분하였다. Baseline은 수원 측후소 과거 30년 1971~2000년 자료를 이용하였고 각 시나리오별 수문성분 및 구조적 물순환 개선기술 적용에 따른 수문성분을 비교 분석하였다. 물순환 개선기술 시나리오 중 침투시설 시나리오는 도시 면적의 20%, 설계침투량은 일본 우수저류침투기술협회 기준인 단위면적($1m^2$)당 10mm 적용하였고, 빗물저장시설 시나리오의 저장시설의 용량은 수도법시행규칙(2011)의 빗물 이용시설기준(도시면적 ${\times}0.05$)을 적용하였다. 시나리오별 강우량은 HadGEM-ES가 증가폭이 크게 나타났고 INM-CM4는 2080s에서 감소 경향을 보였다. 증발산량은 거의 모든 시나리오에서 대부분 감소하였고, 개선기술 적용에 따라 크게 증가하거나 감소폭이 줄어들었다. 직접유출량 및 중간유출량은 기후변화 시나리오별 강우증가분에 따른 미세한 증가 양상을 보였고, 개선기술 적용에 따라 약간 증가하는 양상을 보였다. 지하수유출량의 경우 침투시설 적용으로 함양량이 크게 증가함에 따라 증가폭이 매우 크게 나타났다.

• The Korean Journal of Pesticide Science
• /
• v.12 no.3
• /
• pp.262-269
• /
• 2008

This study was performed to investigate the toxicity of 39 registered insecticides to the susceptibility, systemic effect, and residual effect and control effect against Pine sawyer beetle, Monochamus saltuarius. Eleven kinds of chemicals such as fenitrothion, fenthion, phenthoate, phosphamidon, dinotefuran, actamiprid, clothianidin, thiacloprid, thiamethoxam, esfenvalerate+fenitrothion, and fipronil were showed 100% insecticidal activity both in body spray and twig dipping bioassay. Among these chemicals, fenitrothion and fenthion were showed 100% insecticidal activity when sprayed at 4000 times diluted solutions, and phenthoate, thiacloprid, thiamethoxam and fipronil were showed 100% insecticidal activity when sprayed at 2000 times diluted solution. Root systemic effect was showed 100% mortality in phosphamidon, clothianidin, thiamethoxam, and 77.7% in thiacloprid. In residual effect, fenitrothion and thiamethoxam were showed 80% mortality fifteen days after treatment (DAT), and fenthion, phosphamidon, clothianidin were showed 80% mortality ten DAT, fenitrothion, thiamethoxam, fipronil showed 100% mortality in seven DAT, thiacloprid was showed 100% mortality in three DAT. Fenthion and phenthoate were showed 100% mortality one DAT. In the control effect, 6 kinds of chemicals were showed 100% mortality one DAT and all chemicals showed 100% mortality three DAT.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.2
• /
• pp.97-107
• /
• 1994

The objective of this study is to develop polymer-impregnated concrete(PIC), which is a newly developed composite material made by impregnating polymer impregnanls into hardened normal concrete, and to develop analytical techniques for its proper applications. Crystalline methyl methacrylate(MMA) is chosen as a monomer of polymer impregnants. The corrlpositions of polymer impregnants and producing processes are developed by analyzing the effects of penetration, polymerization, thermal safety, and strengthening characteristics. On t he basis of experimental results of this study, various strength characteristics and stress strain constitutive relations are formulated in terms of the compressive strength of normal concrete and the polymer loadings, which can be applied for analysis and design of PIC members. In order to provide a model for fracture analysis of flexural members, fracture toughness, fracture energy, critical crack width, and tension softening relations near crack tip are also formulated in terms of member depth, initial notch depth, and the flexural strength of normal concrete. The structural analysis procedure and the finite element computer program developed in the study are applicable to evaluate elastic behavior, ultimate strength, and tension softening behavior of MMA type PIC structural members subject to various loading conditions. The accuracy and effectiveness of the developed computer program is examined by comparing the anal ytical results with the experimental results. Therefore, it is concluded that the developed structural analysis procedure and the finite element computer program are applicable to analysis and design of in-situ and precast PIC structural members.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.283-290
• /
• 2008

The repair technique using surface impregnation of reactive compound is so effective for deteriorated concrete structures that many researches are recently focused on these works. Particularly, inorganic impregnant is regarded as ecofriendly material because there is no air-pollution during manufacturing process as well as field coating works. Furthermore, The delamination between old concrete and impregnated surface does not occur, resulting from different material characteristics. In order to evaluate the durability performance of surface-impregnated concrete, durability evaluation through the long-term exposure tests is significant, however, experiments are usually limited to the temporary and qualitative laboratorial scope. In this study, durability characteristics for inorganic and organic/inorganic impregnated concrete specimens are evaluated through longterm chloride exposure test. The specimens with 21MPa and 34MPa strength have been prepared and exposed to chloride attack in the atmospheric, tidal, and submerged conditions. Evaluation for compressive strength, chloride penetration, and electrical potential (half cell potential) for steel corrosion are performed for the specimens exposed for 2 years. From the results, no distinct strength gaining is observed but the resistance to chloride penetration and steel corrosion is evaluated to be improved through surface impregnation. The more improved resistance to chloride attack is measured in the inorganic impregnated concrete and the results from atmospheric condition show more improved resistance to chloride attack than those from submerged and tidal condition.

• Journal of Korea Water Resources Association
• /
• v.39 no.3 s.164
• /
• pp.241-252
• /
• 2006

Numerical models for seepage analysis are useful tools to analyze problems and design protection techniques that are related to seepage through a levee. Though every model may have its own limitations and shortcomings, there were no generalized verifications or calibrations for the commercial models. It means that users can run the model and get the result without understanding nor taking any enough training. This paper Investigates applicability and suitability of some seepage numerical models by comparing analytical solutions with experiments in the user's viewpoint. The results showed that it is more desirable to use analyses with unsaturated-unsteady condition rather than those with saturated-steady conditions, since seepage phenomenon of real levees are changed according to water level and soil property. This study also compared the calculated unsteady solutions with the calculated steady solutions for the levee at Koa of the Nakdong River The comparison revealed that as the result, the safety factor of $2.0{\sim}3.5$ has the same effects for seepage protection techniques when they are designed on the basis of steady-state analysis.

• Journal of Conservation Science
• /
• v.29 no.3
• /
• pp.243-247
• /
• 2013

This study was conducted to investigate the penetration of PEG for conservation treatment conditions of archaeological waterlogged wood. The weight percent gain was examined, depending on the solvent of PEG, concentration and treatment period and temperature of treatment solutions. The penetration of PEG in the cell lumina of treatment woods was observed by scanning electron microscope. The results showed that the type of solvents had no influence on PEG penetration. In the concentration of the PEG treatment solutions, the weight percent gains (WPGs) were increased with increase in concentration of PEG. In terms of the period of the soaking treatment, a maximum WPGs were obtained for only 20 days. There was no distinctive difference in the WPGs by difference the temperature of the treatment. In conclusion, in the conservation of small size of archaeological waterlogged wood, it is confirmed that optimal solvent type and treatment period of PEG are water and 20 days, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3C
• /
• pp.167-178
• /
• 2008

Rainfall-induced slope failures were simulated by seepage and stability analyses for actual slopes of weathered soils. After undisturbed sampling and testing on a specimen of unsaturated conditions, a seepage analysis was performed under actual rainfall and it was found that the pore water pressure increased at the boundary of soil and rock layers. The safety factor of slope stability decreased below 1.0 and the failure of actual slope could be simulated. Under design rainfall intensity, the seepage analysis could not include the effects of the antecedent rainfall and the rainfall duration. Due to these limitations, the safety factor of slope stability resulted in above 1.0, since the hydraulic head of soil layers had not be affected significantly. In the analysis of another slope failure, the parameters of unsaturated conditions were evaluated using artificial neural network (ANN). In the analysis of seepage, the boundary of soil and rock was saturated sufficiently and then the safety factor could be calculated below 1.0. It was found that the failure of actual slope can be simulated by ANN-based estimation.

• Korean journal of applied entomology
• /
• v.55 no.2
• /
• pp.109-117
• /
• 2016

We investigated the control of Bemisia tabaci adults in tomato greenhouses using the eggplant as a trap plant with 4 systemic chemicals. The control effect of dinotefuran SG 50% on tobacco whitefly adults was 80% mortality, the highest than that cyantraniliprole, pyridaben and clothianidin, 51.0%, 12.4% and 11.0% respectively when all chemicals with recommended doses were used. Dinotefuran was applied at various doses and was observed to be most effective above 200ppm (88.4%)t. The control effect of dinotefuran lasted for appromimately nine 9 days and the density of tobacco whitefly adults increased there after. In field tests, the densities of tobacco whitefly adults on tomato shoots were highest at points 0, 15 and 20 m from the eggplant traps and lowest at 5 and 10 m. When the density of tobacco whitefly was low and the eggplants with dinotefuran SG 50% were placed in the tomato greenhouse at 10 m intervals, the overall density of tobacco whitefly adults was lower. In addition, densities were higher at the side of the greenhouse than in the interior and further away from the eggplant. When the density of tobacco whitefly was high and the eggplants with dinotefuran were placed at 5 m intervals, the density of tobacco whitefly at each 5 m point decreased. Theses results confirm that the eggplant is an effective trap plant for attracting tobacco whitefly audlts and combined with dinotefuran SG 50% decreases the density of tobacco whitefly in tomato greenhouses.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.7
• /
• pp.35-42
• /
• 2015

Grouting method has been widely used for the ground improvement and stabilization: mostly to block or control the ground water in the early years and to improve the ground, repair the structure in recent years, ever increasing its use. Despite many advantages so far, the existing grouting method also has some shortcomings including uncertain permeation of grouting with gravity type if the voids between the soil particles are narrow, and problems due to the relaxation of the neighboring ground when injected using injection pressure. As an alternative, a vibration injection method with constant amplitude and frequency has been developed in recent years, with the vibration grouting being reported to have a permeability increasing effect of grout material compared with the positive pressure injection type. Accordingly, the purpose of this study is to investigate the improvement effect of the vibration grouting that applies short-period vibration energy by varying vibration cycle, vibration time and ground conditions to evaluate the strength enhancing effect of grouting materials, expansion effect of grouting body, ground improvement effect of the grouting and the penetration characteristics of the rock joint. The findings of this study show the improved compressive strength of grout, expansion of grouting body and increased penetration rate, according to the vibration compared with non-vibration under the loose soil condition.