• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.125-132
• /
• 2006

Recently, surface finishing and protection materials were developed to restore performance of the deteriorated concrete and inhibiting corrosion of the reinforcing-bar. For this purpose, surface protection agent as well as coatings are used. Coatings have the advantage of low Permeability of $CO_2,\;SO_2$ and water. However, for coatings such as epoxy, urethane and acryl, long-term adhesive strength is reduced and the formed membrane of those is blistered by various causes. Also when organic coatings are applied to the wet surface of concrete, those have a problem with adhesion. On the other hand, surface protection agent penetrates into pore structure in concrete through capillary and cm make a dense micro structure in concrete as a result of filling effect. Furthermore, the chemical reaction between silicate from surface protection agent and cement hydrates can also make a additional hydration product which is ideally compatible with concrete body. The aim of this study is to examine the effect of penetrative surface protection agent(SPA) by evaluating several concrete durability characteristics. The results show that the concrete penetrated surface protection agent exhibited higher durability characteristics for instance, carbonation velocity coefficient, resistance to chemical attack and chloride ion penetration than the plain concrete. These results due to formation of a discontinuous macro-pore system which inhibits deterioration factors of concrete by changed the pore structure(porosity and pore size distributions) of the concrete penetrated surface protection agent.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.50-58
• /
• 2020

When the concrete surface layer is damaged, The method of impregnating the concrete surface with a water repellent cannot secure the expected durability. Recently, various waterproofing and water-repellent materials were mixed into concrete or mortar to secure water repellency even inside cracks, but compressive strength was greatly reduced. In order to overcome the decrease in compressive strength, there has not yet been a study using the merits of organic and inorganic materials at the same time, so in this study, the physical properties and water repellency performance were evaluated by mixing an organic/inorganic composite water repellent appropriately mixed with an organic and inorganic material into the mortar. When mixed with organic/inorganic water repellent, the flow and air content were reduced by about 10% and 50% compared to the Liquid specimen. In the case of the P6L1 specimen, it was confirmed that the compressive strength decreased by about 3.5% compared to the non-mixed mortar at 39.5 MPa, the same as the existing water repellent, Powder. Water-repellent performance The organic-inorganic composite water repellent mixture specimen confirmed higher water repellency than the existing water repellent mixture powder, and the chloride penetration resistance evaluation result showed that the organic-inorganic composite water repellent mixture specimen reduced the passing charge by about 45% compared to the non-mixed mortar. In summary, it is judged that the P5L1 organic/inorganic composite water repellent mixed with a powder water repellent and a liquid water repellent in a ratio of 5:1 is the most reasonable to prevent the decrease in compressive strength and secure water repellency.

• Tribology and Lubricants
• /
• v.25 no.6
• /
• pp.414-420
• /
• 2009

In this study, using the general expressions predicting the pressure under a blade and the volume of coating fluid passing through the blade edge, it is predicted the change of the coating wet film thickness related with various parameters determining the characteristics of this blade coating process. Using the results of this research, it can be found the optimized coating wet film thickness taking into account the parameters related with various coating process on various metal surfaces will be able to be predicted.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.453-456
• /
• 2006

If cement can be manufactured with industrial byproducts such as granulated blast furnace slag(GBFS), phosphogypsum(PG), and waste lime(WL) instead of clinker as its counterproposal, there would be many advantages, including maximum use of these industrial byproducts for high value-added resources, conservation of natural resources and energy by omitting the use of clinker, minimized environmental pollution problems caused by CO2 discharge, and reduction of the production cost. This research investigates the chloride ion permeability of NSC concrete added PG and WL to GBFS as sulfate and alkali activators. The result of experiment of chloride ion permeability, showed that NSC is very excellent in seawater resistance. Such a reasons are that the hydrate like CSH gel and ettringite formed dense pore structure of NSC matrix.

• Tribology and Lubricants
• /
• v.26 no.2
• /
• pp.142-148
• /
• 2010

The purpose of this study is to find how to be formed the wet film thickness during the low friction coating process for a piston skirt with application to the theory of screen printing. In other words, in this research, it is to derive the general expressions predicting the pressure under a blade and the volume of coating fluid passing through the blade edge. Using these expressions, it is to be approved that the current operation characteristics of a screen printing system to a sample blade coating process for low friction coating on a piston skirt can be quantitatively assessed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.454-458
• /
• 1999

절연재료의 성능 개선과 전력계통의 신뢰성을 확보하기 위해 고분자 재료가 많이 사용되고 있다. 고분자 절연재료는 절연저항 및 절연파괴 강도가 우수하며, 유전손실이 낮고 기계적 강도가 우수하며 대량생산 및 제조가 용이하고, 경량이며 유지비용이 절감되는 등의 장점이 있으나 연구의 역사가 짧고 운전 실적이 적어 불분명한 점이 많으며, 내열성 및 내트랙킹성이 비교적 약하며 표면에 오손이 축적되어 열화가 발생, 진행되거나 수분침투에 의한 파괴사고가 발생하는 단점이 있다. 따라서, 고분자 절연재료의 기본적인 화학적 구조 및 인공적 인 오손 환경을 만들어, 오손 환경의 농도 및 시간대별로 오손환경하에서 우수한 특성을 보이는 샘플을 이용하여 LDPE전체에 대한 실험을 진행했다. 또한 측정법으로서는 화학적인 구조 및 함량을 측정하기 위하여 FT-lR, DSC, TGA를 이용했고, 전기적인 측정으로서는 각각의 조건별로 전도도 및 부분방전특성을 평가하였다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04b
• /
• pp.52-55
• /
• 1997

여과가 진행됨에 따라 막의 표면에서 발생하여 여과선속을 저하시키는 케이크층의 형성은 막을 이용한 고-액 분리공정에서 발생하는 가장 큰 문제점의 하나로서 이는 막 분리공정의 경제성을 좌우하는 중요한 인자가 된다. 이러한 문제점을 극복하기 위하여 유체와 막 사이의 상대속도를 증가시켜 여과속도를 향상시키는 십자흐름 여과, 즉 CFF(crossflow filtration)에 대한 연구가 활발히 진행되어 왔다. 그러나 이러한 심자흐름 여과에서도 막과 유체 사이의 상대속도의 증가에 한계가 있고 또한, 막의 기공보다 작은 입자가 막의 기공 내에 침투하여 막을 오염시키는 현상을 예측하기 어렵기 때문에 여과기의 설계에 있어서 많은 문제점이 발생하고 있다. 이에 오염된 막을 재생시키기 위하여 기계적.화학적인 여러 가지 방법들이 개발되고 여과선속을 향상시키는 방법이 꾸준히 연구되어 분리막 기술의 경제성을 향상시켜 왔다. 본 연구에서는 매우 안정된 유동의 하나로서 막 표면의 전단력을 향상시키는 데에 효과가 있다고 알려진 Taylor와류를 응용한 회전막 여과기를 사용하여 여러 가지 크기의 입자에 대한 여과실험을 수행함으로써 이러한 유동이 케이크의 형성에 미치는 영향을 살펴보았다. 또한 여과선속에 영향을 미치는 여러 매개인자를 알아보고 실험결과를 간단한 모델식에 적용해 봄으로써 막의 저항을 예측할 수 있는 모델식으로의 개선 방향을 제시하고자 한다.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.793-801
• /
• 2005

This study investigates fundamental properties of recycled aggregate concrete which incorporated 100% recycled coarse aggregate and various amount of recycled fine aggregate. In addition, for the purpose of the improvement of long term strength and durability, a part of cement was replaced with fly ash. Compressive strength and resistance to chloride ion penetration and carbonation were investigated. When the coarse aggregate was completely replaced with the recycled the replacement ratio of the fine aggregate with the recycled was recommended to be limited below 60% in the consideration of strength. The strength of the steam-cured specimen was very comparable to the wet-cured at 28 days. As fly ash content increased the resistance to chloride ion penetration was increased. The chloride ion penetrability based on the charge passed was found to be low at 21 days and very low at 56 days, respectively. Carbonation depth and carbonation velocity coefficient increased as the fly ash content increased and the relationship between the carbonation depth and recycled fine aggregate replacement ratio was not clear. Up to 28days, however, the measured carbonation depth was mostly less than 10mm which could be considered as low.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.397.2-397.2
• /
• 2014

유기 발광 다이오드 (OLED)의 상용화를 위해 해결해야할 기술적 문제 중하나는 장수명이다. OLED에 적용된 유기물 층은 수분과 산소에 취약하여 소자 수명을 단축하는 요소로 작용하는데, 이를 해결하기 위해 유기물을 보호하며, 유기물 내로 침투되는 수분과 산소를 제어하기 위한 보호 층의 증착이 필수적이다. 필수적이다. 본 연구에서는, 사이클 화학 기상 증착법(C-CVD)을 이용하여 SiN/SiCN/SiN 구조의 무기 박막을 증착하여 유기물 보호층으로서의 적용 가능성을 제시하고자 한다. 이 때 각층의 두께는 각 각 10 nm이다. 증착된 다층 무기 박막은 비정질 상으로 수분 침투 보호막으로서 적당하다. 다층 무기 박막의 수분에 대한 저항성은 칼슘을 이용한 투과도 변화를 이용하여 측정하였다. 칼슘을 이용한 투과도 측정을 위해 고분자 PEN 필름위에 칼슘을 60nm 두께로 증착 시키고, 이어서 무기물인 SiN/SiCN/SiN의 다층 박막을 확산 방지층으로 증착 하였다. 제작된 소자는 온도 $85^{\circ}C$, 상대습도 85%의 가혹 조건에서 시간에 따른 표면 변화 및 투과도의 변화를 측정하였다. SiN/SiCN/SiN 구조를 갖는 무기 박막 층의 투습도는 3000시간까지는 $3.2{\times}10-5g/m/day$를 유지하였다. 이는 OLED 소자의 상용화를 위한 요구 조건에 근접한 값이다. 그러나 투습도는 측정 시간이 6000시간이 지난 후에 급격 증가하는데 이것은 30nm 두께의 SiN/SiCN/SiN의 확산 방지층에 임계 수명이 존재 한다는 것을 의미 한다고 할 수 있다. C-CVD 기술에 의해 제조된 다층 무기 박막 보호 층의 경계면에서 각 층간의 intermixing 현상이 관측되었으며, 이는 무기물 층의 결함과 핀 홀을 통해 내부로 확산 되는 수분의 침투 경로를 효과적으로 제어할 수 있는 방법이다. 본 연구 결과는 유연 기판 상에 제작된 OLED 소자에 적용 가능한 기술로서 소자 수명의 연장 뿐만 아니라 경량화에도 기여할 수 있는 기술이다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.320-328
• /
• 2007

The durability of marine concrete structures is severely degraded by corrosion due to seawater attack and diffusion of chloride in concrete. The deduction of durability causes high repair cost for maintenance of marine concrete structure. So, the applicability of high-durable materials is investigated to improve the durability in marine concrete structures. For these, the characteristics of corrosion prevention of marine concrete structures mixed with the mineral admixtures(SF, FA and BFS), the modified steel(stainless and coating steel), and corrosion inhibitors are evaluated using electro-chemical methods. As a results of this study, it is quantified for the effect of promotion of durability by high-durability materials in marine concrete structures.