• Tunnel and Underground Space
• /
• v.30 no.3
• /
• pp.193-213
• /
• 2020

A mathematical model to simulate more realistically the penetration of compacted bentonite buffer installed in the deposition hole into the discontinuity in the excavation damaged zone formed at the inner wall of the deposition hole in the geological repository for spent fuel is developed. In this model, the penetration of compacted bentonite is assumed to be the flow of Bingham fluid through the parallel planar rock fracture. The penetration of compacted bentonite is analyzed using the developed model. The results show that the maximum penetration depth of compacted bentonite into the rock fracture is proportioned to the swelling pressure of saturated compacted bentonite and the aperture of rock fracture. However, it is in inverse proportion to the yield strength of compacted bentonite. The viscosity of compacted bentonite dominates the penetration rate of compacted bentonite, but has no influence to the maximum penetration depth.

• Journal of Conservation Science
• /
• v.20
• /
• pp.81-88
• /
• 2007

For the conservation of wooden coffin from King Muryeong's Tomb we examined weight change, shrinkage rate, color changes, and permeation expansion according to the permeation pretreatment chemicals by producing experimental samples with similar physical properties. The result shows Dammar 2 %(in xylene) as the most excellent treatment for protecting deformation by contraction and strengthening materials which are also maintaining its original colors of wood. Therefore, we could get strengthening conservation treatments of dried wooden coffin materials by using Dammar.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.525-528
• /
• 2008

For well-constructed concrete, its service life is a long term and it has an enough durability performance. However, for cracked concrete, it is clear that cracks should be preferential channel for the penetration of aggressive substance such as chloride ions according to author's previous researches. In order to enhance the lifetime of cracked concrete, critical issues in the performance of the concrete is the risk of chloride-induced corrosion. Even though crack width can be reduced due to the high reinforcement ratio, the question is to which extend these cracks may jeopardize the durability of cracked concrete. If the size of crack is small, surface treatment system can be considered as one of the best options to extend the service life of concrete structures exposed to marine environment simply in terms of cost effectiveness versus durability performance. Thus, it should be decided to undertake an experimental study on the effect of different types of surface treatment system, which are expected to seal the concrete and the cracks to chloride-induced corrosion in particular. In this study, it is examined the effect of surfaced treated systems on chloride penetration through microcracks. Single surface treatments of penetrant or coating and double application were considered as an experimental variation. RCM (Rapid Chloride Migration) testing is accomplished to visualize chloride penetration via cracks.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.179-190
• /
• 2003

The grout based on solution type makes it difficult to get the improvement of ground strength and the effefct of water curtain because it has lower strength and durability than suspension type. Nowadays, the technology of particle acceleration, that enhance the material permeability, such as grout based on solution type, and inexpensive grout, is being required. For these reasons, in this study, using wet milling system, we evaluated physical properties of manufactured factors such as water-cement ratio of particles before being milled, optimum milling capacity by controlling milling time and rpm, viscosity of materials, permeation coefficient, and unconfined compressive strength. Also, using micro wet milling apparatus which could manufacture ordinary Portland cement and high speed shear mix which could forcefully separate conglomerate particles in situ, we performed electrical resistivity investigation and falling head permeability tests to analyze differences of grouting effects. From these results, we found that the permeability of the applied equipment was much superior, and in the case of using high speed shear mixer, particles of grout material were well separated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.690-690
• /
• 2013

Field에 설치된 PV모듈은 가혹한 외부 환경에 노출되어 외부 하중, 온도 변화, 자외선, 수분 등의 영향을 받게 된다. 특히 PV모듈 내부로 수분이 침투 하였을 경우에는 태양전지와 전극의 부식 등 발전성능을 크게 저하시킬 수 있다. 이러한 외부 환경으로부터 태양전지가 안정적으로 발전할 수 있도록 PV 모듈은 전면재료인 유리와 후면재료인 Back Sheet를 진공 상태에서 압력을 가해 봉합하는 Lamination 공정을 거쳐 제작 되어 진다. 특히 Lamination 공정에 사용되는 EVA (ethylene vinyl acetate)는 PV모듈의 내구성능을 좌우할 수 있는 가장 중요한 재료중 하나이다. 본 논문에서는 Lamination 공정에 사용되어지는 EVA의 수분 침투의 특성에 관한 연구를 수행하였다. 공정 조건에 따른 EVA에 침투 되는 수분의 양을 확인하기 위해 Lamination 공정 조건을 변경하여 실험을 진행하였다. 그리고 외부 환경 변화에 의한 영향을 확인하기 위해 EVA가 수분에 노출 되는 시간과 온도를 변화시켜 보았다. 실험의 결과는 외부에 노출된 PV 모듈의 내부에 침투할 수 있는 수분의 양을 예상할 수 있게 하며, 수분 침투에 의한 내구성의 저하를 감소시키기 위한 최적의 Lamination 공정 조건과 봉합재 선정을 위한 기초 자료를 제공한다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.483-486
• /
• 2003

본 연구는 운동장, 주차장, 도로측면, 보도, 기타 주거시설 등의 우수 찻집시설에 사용되는 콘크리트 구조물의 침투능 확보를 위한 투수성 찻집 구조물 개발에 관한 것이다. 투수성을 확보하기 위하여 일반 차집시설의 콘크리트 구조체 벽면에 천공을 하고 천공된 측구 내에 쇄석을 충진시켜 침투되는 우수의 수질도 개선할 수 있다. 본 제작방법은 별도의 침투소재를 사용하는 경우와 비교해 볼 때 경제성이 우수하며 동일시공방법과 규격으로 대체재로서 활용성이 높을 것으로 전망된다, 본 연구에서 개발하고 있는 여재를 이용한 침투시설은 침투능을 충분히 확보할 수 있음을 확인하였고 SS기준으로 27％∼86％의 제거율을 보였으며, COD기준 20％∼68％의 제거율을 나타냈으며, 탁도기준 29％∼88％의 제거율을 볼 수 이었다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.211-214
• /
• 2003

본 연구는 운동장, 주차장, 도로측면, 보도, 기타 주거시설 등의 우수 차집시설에 사용되는 콘크리트 구조물의 침투능 확보를 위한 투수성 차집구조물 개발에 관한 것이다. 일반적인 차집시설(측구, 받이, 맨홀등)을 투수가 가능한 구조로 변경하여 우수의 침투를 발생시킴으로서 우수유출을 저감하고 지하수론 확보할 수 있다. 투수성을 확보하기 위하여 일반 차집시설의 콘크리트 구조체 벽면에 천공을 하고 천공된 측구내에 쇄석을 충진시켜 침투되는 우수의 수질도 개선할 수 있다. 본 제작방법은 별도의 침투소재를 사용하는 경우와 비교해 볼 때 경제성이 우수하며 동일시공방법과 규격으로 대체재로서 활용성이 높을 것으로 전망된다.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.2
• /
• pp.149-158
• /
• 2017

Permeating injection is commonly known as an ideal type of injection in grouting reservoir embankment, yet often-combined permeating and fracturing injection grouting operation can disturb the original soil. A grouting method has been regarded as effective and developed to ameliorate the possible disturbance problem. It involves compaction grouting with low expansive pressure near the injection hole and repetitive injection and compaction with grout material that allows ideal permeating injection. This thesis develops Hybrid Grout (ie. HG grout) that allows various application in any ground condition combined together, has high fineness and low viscosity, and expands permeation injection to silty sand. It researches on the injection effect of permeable compaction grout which is done with PC packer and is a combination of HG grout and expansion agent to obtain permeation compaction effect on the area near grout injection spot by developing Permeable Compaction Type Packer(ie. PC packer). As the developed PC packer, HG grout, and and expansion agent (HI-E) are applied to reservoir embankment reinforcement grouting, possibile permeation compaction effect that satisfies reservoir embankment grouting standard is confirmed according to the research.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.5
• /
• pp.13-24
• /
• 2012

In this study, the in-situ model test has been conducted and used to estimate and analyze consolidation behavior of the ground by using the miniature test that reconstructs economically geotechnical behavior of in-situ full scale structure. To analogize the relation among effective stress, void ratio and coefficient of permeability at the self-weight consolidation stage, the low stress seepage consolidation test has been conducted and the involution function of constitutive equation had been obtained from the result of the curve fitted seepage consolidation test result. As a result of the numerical analysis that had been conducted on the representative section using a constitute equation, final settlement was similar with those of self-weight consolidation of the centrifugal model test. But, it was more or less smaller. It seems that these trends are caused by the difference between estimated values.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.155-160
• /
• 2009

This study is designed to optimize the method of using SE-101 for strengthening the durability and the stabilization of moving historical site. The permeability and the shear strength of The epoxy SE-101 with low viscosity were measured on different particle sizes and moisture content of soil. Like it can be expected from the data of viscosity, as the soil particle size was increased, the permeability was also increased, while the shear strength was decreased. And especially, it is noted that the deviation of permeability can be more extreme according to the different hardening speed of macromolecule and mineral additives. As the rate of moisture content in soil sample is increased, the deviation between permeability and shear strength is also increased. Even though among the same soil sample, some parts of it can be weaker than others, which cause the breakages of epoxy products. Thus, it is necessary that the soil should be dried over 50% of permeation depth of SE-101 before use.