• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.2
• /
• pp.69-76
• /
• 2009

Infiltration is the process of water penetrating from the ground surface into soil. Infiltration plays an important role on affecting ground water surface and surface flow during rainy season. The amount of infiltration water would be decreased as the urbanization would increase. Such phenomenons would make streamflow decrease or stream run dry. In this study the cumulative infiltration and the infiltration capacity of ground surface have been determined by the field experiment at three sites in the Hankyong National University, Korea. Three type pervious pedestrian blocks of the cumulative infiltration and the infiltration capacity have also been determined at the same site of the ground surface. It has been shown that one of three type blocks in terms of infiltration capacity is almost same as that of ground surface. The Kostiakov type has been adopted to determine the cumulative infiltration and the infiltration capacity for each site. The Horton type has been also adopted to determine the cumulative infiltration and the infiltration capacity. The value of parameter k for each site is determined and soil type would be identified corresponding to the value of parameter.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.299-300
• /
• 2009

The purpose of this study is analysis on properties of water absorption and chloride penetration according to moisture content in cement mortar.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.295-295
• /
• 2015

강우의 시 공간적 불균형이 심한 우리나라는 수자원 확보 및 관리가 어려움에 따라 신규 수자원 확보와 기존 수자원 관리의 중요성에 대한 인식이 높아지고 있다. 최근 대체수자원으로서 대두되고 있는 지하수는 지표수에 비해 이용지점에서 바로 취수하여 사용이 가능하다는 장점이 있으나, 오염이 진행되면 복구에 상당한 기간과 비용이 소요됨에 따라 철저한 관리가 필요하다. 특히 해안지역 수자원의 경우, 내륙지역에 비해 하천이 발달해 있지 않아 지하수에 대한 높은 의존도에 따른 수량적 문제와 해수와 접해있는 면적이 많음에 따라 지하수와 해수간의 유동으로 인한 수질적 문제로 지하수 관리가 더욱 어렵다. 이에 본 연구는 지하수유동해석프로그램인 Visual MODFLOW의 SEAWAT model을 이용하여 지하수위 변화에 따른 해수침투의 영향을 판단하고자 하였다. 연구지역은 태안지역의 근흥1, 근흥2 관측소의 지하수위 데이터를 사용하였으며, 2008 ~ 2014년 까지 매년 지하수위 변동에 따라 해수침투 영향을 분석하였다. 이와 함께 해수침투 영향 판단 인자인 EC, TDS는 각 관측소 데이터를 통한 환산 및 분석 진행하고, $Cl/HCO_3$ 몰비는 참고문헌을 인용하여 모델링에 의한 해수침투 영향과 관측자료 및 이온분석을 통한 영향을 비교하였다.

• Journal of the Korea Concrete Institute
• /
• v.16 no.4 s.82
• /
• pp.477-484
• /
• 2004

As a part of durability improvement of concrete-structure, penetrating water repellency of liquid type is applied to concrete surface. Besides, a related standard is made recently, but the standard has been prescribe for initial settlement state of penetrating water repellency of liquid type, to the exclusion of performance variation depending time and outdoor environment factor. For measurement of performance variation, we measured the weight of outdoor exposure specimen every regular intervals and check a measured value against a measured value of different condition specimen. Moreover, after the application of penetrating water repellent, measured a adhesive strength in tension between cement-polymer modified waterproof coatings and surface of specimen. The applied penetrating water repellent is a emulsified silicon type with a deep penetration depth. In view of the results so far achieved, the more a Quantity of application and active solid content does get, the deeper penetrating water repellency of emulsion type Penetrate get longer and supplied moisture increase in quantity, a penetrating water repellency of liquid type penetrates more deep, but a quantity of water absorption increase gradually. Perhaps this result is caused by a reduction of active solid content on concrete surface, because active ingredient is moved into the concrete by dissolution.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.354-357
• /
• 2009

최근 도시화로 인한 유역 내 불투수 면적의 증가로 인해 첨두홍수량이 증가하고 있으며 이 문제를 해소하기 위해 종래에는 인공적으로 하천폭을 증가시키고 제방을 높이는 대책 등이 시행되었으나 많은 문제점이 발생되어 대책의 단순적용에 어려움이 있다. 이러한 문제의 해결방안으로 강우유출수 저감 목적 최적관리기법(BMP)이 대두되었으며, 실제로 이러한 빗물을 저장하고, 침투시키는 우수 저류 침투시설에 대한 관심이 급증하여 정부 및 일부 지자체를 중심으로 우수 저류 침투시설의 도입이 점차 확산되고 있다. 본 연구에서는 우수 저류 침투시설중 저류지, 투수성포장, 옥상녹화를 EPA SWMM으로 모형화 하여 설치비용에 따른 첨두유출량 저감효과를 비교하였으며, 그 결과 투수성 포장이 비용 대비 첨두유출량의 저감효과가 가장 뛰어난 것으로 나타났다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.71-77
• /
• 2010

The concrete structure's durability and integrity is reduced owing to various deterioration phenomena. Therefore, it is important to prevent the deterioration phenomena. This study inquired into the various experimental results of specimens with different dilution concentration and impregnation time by the each solution to present the economic and efficient using method of the inorganic surface penetration agents. As a results, the reasonable dilution concentration and impregnation time of colloidal silica solutions are 15% and 5 minute and for the sodium alumina silicate solutions are 17% and 10 second.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.4
• /
• pp.247-256
• /
• 2012

The purpose of this study is to decide the permeability and the rate of flow in a way of both site investigation and backward analysis and the most reasonable numerical analysis by performing a seepage model test for measuring the deformation swept volume of the embankment body in order to review a stability of the sea dyke being composed of multi-layers depending on variation of infiltration. As a result of the review, it could be forecasted that sweeping loss would be taken place at the boundary between bed protection works and embankment materials of the sea dyke due to a permeability difference of the multi-layered bed foundation structures and the sea dyke deformation would be occurred as a result thereby. As result of a numerical analysis for the seepage model test, it could be observed that critical velocity method was found to be smaller than the numerical analysis value but its tendency was similar and therefore it was judged that this method could be applied for the actual cross section.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.89-89
• /
• 2011

한 유역에서 유출 모형의 성공을 좌우할 수 있는 중요한 요소 중 하나는 강수 손실량(precipitation loss)을 결정하는 것이다. 손실량은 홍수 예측이나 수자원 평가를 위한 유출 모형의 주요 입력 자료가 된다. 만족할 만한 유출 모형을 구현하기 위해서는 손실량의 정확한 평가가 요구된다(Najafi, 2003). 총 강우량 중에서 손실량을 뺀 초과 강우량 또는 유효 강우량은 치수적 측면이든 이수적 측면에서 요구되는 직접 유출량(direct runoffs)에 상당하는 규모로서 유출 모형에서 매우 중요하다. 이제까지 많은 경우에 직접 유출되는 유효 강수량은 총강수량에서 주요 손실량 성분인 침투량을 감하여 산출하여 왔다. 이 때 침투량은 호우사상별로 적게는 유출량의 30%에서 많게는 100%까지 차지할 만큼 주요한 손실 성분으로 취급되었다(Chow, 1964 ; Singh, 1989). 침투량을 산정하기 위한 기존 모형내 포함되는 매개변수 값은 실용적으로 잘 정립되지 않았기 때문에 유출 모형에 실제 적용하는데 어려움이 있다. 한편 침투량 산정 모형 중에 Horton 모형은 가장 잘 알려져 있는 모형 중 하나이다(Horton, 1939 ; 1940). 후속 성과(Blake et al., 1968; Rawls et al., 1976)은 있었지만 모형내 매개변수 값을 결정해야 하는 실용상의 어려운 점이 있다(Singh, 1989). 그리고 국내 초과 강수량 산출 모형에 관한 연구사례가 다수(조홍제,1986; 남선우와 최은호, 1990; 정성원과 김승, 1991; 안태진 등, 2000; 박햇님과 조원철, 2002; 유주환, 2006) 있었지만 시간적으로 연속함수를 갖는 Horton 침투 모형을 실무적으로 이산화 하여 적용할 수 있도록 하는 방법의 절차 및 원칙이 제시되지 않아 유출 모형에 직접 적용하기 쉽지 않은 형편이다. 이에 본 발표에서는 한 유역에서 Horton 매개변수를 결정한 기존 연구(2006, 유주환)의 성과를 적용한 Horton 침투모형을 강수사상별 이산화한 시간별로 적용하는 절차와 적용 원칙을 소개하고자 한다.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.10
• /
• pp.21-29
• /
• 2021

Most concrete gravity-type dams in and out of the country were constructed by column method to control cracks caused by concrete hydration heat generated during construction, resulting in a certain level of leakage after impoundment through various causes, such as contraction joints and construction joints. However, due to the characteristics of concrete structures that shrink and expand according to temperature, concrete dams have vertical joints and drains to allow penetration. PVC waterproof shows excellent effects in completion of the dam, which however increases the possibility of interfacial failure due to different thermal expansion. Other causes of penetration may include problems with quality control during installation, generation of cracks due to heat of hydration of concrete, waterproofing methods, etc. In the case of Bohyunsan Dam in Yeongcheon, North Gyeongsang Province, the amount of drainage in the gallery was checked and underwater, and it was confirmed that there are many penetrations from drainage holes connected to vertical joints, and that some of the PVC waterproofs are not fully operated. As a new method to prevent penetration through vertical joints, D.S.I.M. (Dam Sealing Innovation Method) developed by World E&C was applied to Bohyunsan Dam and checked the amount of drainage in the gallery. As a result of first testing three most leaking vertical joints, the drain in the gallery was reduced by 87% on the average and then applied to the remaining 13 locations, which showed a 83% reduction effect based on the total drain in the gallery. Summing up these results, it was found that D.S.I.M. preventing water leakage from the upstream face is a valid construction method to reduce the water see-through and penetration quantity seen in downstream faces of concrete dams. If D.S.I.M. is applied to other concrete dams at domestic and abroad, it is expected that it will be very effective to prevent water leakage through vertical joints that are visible from downstream faces.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.12
• /
• pp.5-12
• /
• 2013

In this study, weathered granite model tests were performed to investigate the variation of volumetric water content and matric suction by the adsorption and desorption processes of artificial rainfall. It has been compared with numerical analysis in unsaturated condition. As the results, the behaviors of volumetric water content and matric suction were distinguished by the seepage distance separated into higher, middle and lower area, and the drainage layer located at the bottom of the experimental device. In the adsorption process, the instantaneously large change of matric suction and water content were related to the increase of permeability in soil. However, in the desorption process, the change of matric suction and water content were gradually small because of the decrease of permeability. The volumetric water content and matric suction showed the difference according to the seepage distance, however the typical characteristic curves were made by the adsorption and desorption processes.