• Food Science of Animal Resources
• /
• v.26 no.2
• /
• pp.229-235
• /
• 2006

The purpose of this study was to investigate the effect of marination condition(immersion and tumbling) on quality characteristics of cured pork meat and sensory properties of pork jerky. Pork meat was immersed for 1, 6, 12, 24, and 48 hours or tumbled for 10, 20, 30, and 60 minutes with curing solution. The jerky was made from cured pork meat immersed for 6, 12, 24, and 48 hours or tumbled fer 10, 20, 30, and 60 minutes. The curing yields and water holding capacity in immersion and tumbling treatments were increased as marination time increased, and the curing yields of tumbling treatments were higher than those of immersion treatments, but water holding capacity was not. The pH value of all treatments were not significantly different. CIE $L^*$- and $b^*$-value of immersion treatments were significantly decreased as marination time increased, but CIE $a^*$-value were increased. Objective color of tumbling treatments showed a similar tendency with those of immersion treatment. The sensory properties of pork jerky were not significantly different between immersion and tumbling treatments.

• Culinary science and hospitality research
• /
• v.18 no.4
• /
• pp.266-276
• /
• 2012

Salt, one of the main ingredients to make bread, functions differently according to environmental changes such as usage levels and methods. We examined the effects of yeast soaking time in about 8% salt solution on gas production and fermentation rate of dough and characteristics of white bread. Gas retention, related to gas production and fermentation rate, was the best at the 45 min soaking time. And pH of dough was appropriate to the fermentation in the range of 15 to 45 min of soaking time. Volume and specific volume of bread were best in 45 min soaking time(p<0.001), but the hardness of crumb texture analyzed with TA was the hardest among the samples(p<0.001). Brightness of color(L value) was significantly affected by soaking time(p<0.001), but b value was not considered. According to the preference test, the white pan bread made with 45 min soaking time in salt solution was preferred the most.

• Korean Journal of Agricultural Science
• /
• v.20 no.1
• /
• pp.18-24
• /
• 1993

This experiment was focused on determining the potential of sodium hypochlorite (NaOCl) as fungicide against seed-borne fungi. Effects of NaOCl to control seed-borne fungi were compared to the those of Benlate T in several crop seeds. 1. The effect of NaOCl on disinfection of sesame seeds without imparing germination was highest in the range of 1-2% solution for 10 min. Also, a 30 min immersion of rice seed in 1-2% solution reduced incedence of seed-borne fungi. 2. Alternaria spp. in seeds of radish and chinese cabbage and Colletoricum spp. in pepper were significantly reduced by a 10 min immersion of seeds in 1% NaOCl. 3. The effective control range of NaOCl for seed-borne fungi was much wider than that of Benlate T in sesame seeds. No clear difference between chemicals was found in rice seeds. However, germination of seeds were impaired at 1-2% NaOCl immersion for more than 1 hour.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.3
• /
• pp.382-386
• /
• 1997

In the present study, an attempt was made to investigate the effects of steeping treatment on browning of onion hydrolysate. After steeping treatment with solvents, phenols content of methanol and ethanol were showed 25.1mg/ml and 24.9mg/ml. And absorbance of methanol and ethanol was showed 0.26 and 0.22. L and b value of treatment with methanol and ethanol were lower than other solvents. Browning reaction of onion hydrolysate was decreased with increasing concentration of ethanol. Treatment of above 80% ethanol was effective to remove phenols and was showed a low color intensity. Treatment with 80% ethanol was more effective than addition of cystein to remove phenols and to decrease browing degree.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.5
• /
• pp.199-205
• /
• 2018

A geopolymer was produced from coal ash generated from an integrated gasification combined cycle (IGCC) plant and its water resistance was evaluated. For this purpose, the geopolymer specimens were immersed in water for 30 days to measure changes in microstructure and alkalinity of the immersion liquid. Particularly, the experiment was carried out with foaming status of the geopolymers and parameters of room temperature aging condition, and immersion time. The foamed geopolymer containing 0.1 wt% Si-sludge had pores with a diameter of 1 to 3 mm and exhibited excellent foamability. Also, the calcium-silicate-hydrate crystal phase appeared in the foamed geopolymer. In the geopolymer immersion experiment, the pH of the immersion liquid increased with time, because the un-reacted alkali activator remained was dissolved in the immersion liquid. From the pH change of the immersion liquid, it was found that geopolymer reaction in the foamed specimen was completed faster than the non-foamed specimen. Through this study, it was possible to successfully produce foamed and non-foamed geopolymers recycled from IGCC coal ash. Also the necessary data for the safe application of IGCC coal ash-based geopolymers to areas where water resistance is needed were established; for example, the process conditions for room temperature aging time, effect of foaming status, immersion time and so on.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2002.05a
• /
• pp.79-80
• /
• 2002

• Proceedings of the Korean Nutrition Society Conference
• /
• 2003.05a
• /
• pp.237.1-237.1
• /
• 2003

• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.289-293
• /
• 1989

During soaking of soybeans in water at $4^{\circ}C{\sim}98^{\circ}C$, the volume gain of soybeans held a linear relation with the square root of soaking time regardless of soaking temperatures and showed a highly positive correlation with weight gain, which indicated that the volume increase of soybeans was basically due to the diffusion of water. The activation energies for the volume increase were changed at $40^{\circ}C$. The log time to reach a fixed moisture content showed a linear relation with the soaking temperature during soaking of soybeans at $4^{\circ}C-60^{\circ}C$. The z-value to reach 50% hydration was $50^{\circ}C-55^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.425-430
• /
• 2002

Physicochemical properties of chicken feet gelatin produced under acidic and alkaline conditions were investigated. Amino acid content of chicken feet gelatin was different from that of commercial gelatin due to the differences in raw materials and production process. Yield and hardness of chicken feet gelatin reached maximum at 24 h under acidic condition and at 1 week under alkaline condition, respectively. As the soaking period increased, viscosity and clarity increased under acidic condition, while decreased under alkaline condition. Color of the acid-treated chicken feet gelatin gel was more desirable than that of the alkali-treated on based upon L, a, b values. From gel permeation chromatography of the chicken feet gelatin, 12 subunits were detected. The amount of high molecular weight subunits, which is related to viscosity and hardness, of the alkali-treated chicken feet gelatin was twice as much as that of the acid-treated one.

• Applied Biological Chemistry
• /
• v.31 no.1
• /
• pp.46-51
• /
• 1988

The effects of temperature on the water uptake rate of soybeans soaked in tap water and 0.5% $NaHCO_3$ solution were studied. The higher the soaking temperature, the faster the hydration rate, and among the three soybean varieties (Tanyob, Kwanggyo and Saeal), Tanyob(the smallest variety) showed faster rate than ocher varieties when soaking in tap water and 0.5% $NaHCO_3$ solution. Activation energy due to weight increase was calculated using Arrhenius equation. z-Values calculated from weight changes to reach different degrees of hydration during soaking showed the tendency to decrease with the increase of hydration degree when soaking in tap water and 0.5% $NaHCO_3$ solution.