• Clean Technology
• /
• v.7 no.1
• /
• pp.35-42
• /
• 2001

This study was performed to evaluate the effect of zeolite addition on biofloc in aictvated sludge process. Two units were compared each other, in which one was operated as control unit (CU) and the other was managed by adding zeolite into aeration basin to sustain 4,000 mg/l (ZU). It was observed that flocs of both units were enduringly increased in medium size by extending SRT (Solid Retention Time), although their effect size of ZU was smaller than theirs of CU. Zeolite application excessively improved sludge settling property and ZU presented sludge settling velocity of 3.4 to 11 m/h regardless of SRT variation. The sludge volume index (SVI) was in the range of 50 and 108 ml/g. Conversely, the sludge settling velocity of CU seriously depended on SRT increase, and sludge sedimentation was not achieved at a 40 days of SRT due to Sphaerotilus appeared predominantly in reactor.

• Applied Biological Chemistry
• /
• v.41 no.1
• /
• pp.89-94
• /
• 1998

Various Mn-oxides can oxidize Cr(III) to Cr(VI). Behaviors of chromium species in the oxidation system, especially on the oxide surface, are expected to control the reaction. During Cr(III) oxidation by birnessite and pyrolusite, Cr species in the reaction system were determined to elucidate their effects on the oxidation. Capacities of Cr oxidation of the two Mn-oxides were quite different. Solution pH and initial Cr(III) concentration also had significant effects on the Cr(III) oxidation by Mn-oxides. Chromium oxidation by pyrolusite was less than 5% of the oxidation by birnessite. The high crystallinity of pyrolusite could be one of the reasons and the difficulty of Cr (III) diffusion to the positive pyrolusite surface and Cr(VI) and Cr(III) adsorption seems to be other controlling factors. At pH 3, adsorption or precipitation of Cr species on the surface of birnessite were not found. Small amount of Cr(VI) adsorption was found on the surface of pyrolusite, but arty Cr precipitation on the oxide surface was not found. Therefore Cr(III) oxidation at pH 3 seems to be controlled mainly by the characteristics of Mn-oxides. Chromiun oxidation by Mn-oxides is thermodynamically more favorable at higher solution pH. However as solution pH increased Cr oxidation by birnessite was significantly inhibited. For Cr oxidation by pyrolusite, as pH increased the oxidation increased, but as Cr(III) addition increased the reaction was inhibited. Under these conditions some unidentified fraction of Cr species was found and this fraction is considered to be Cr(III) precipitation an the oxide surface. Chromium(III) precipitation on the oxide surface seems to play an important role in limiting Cr(III) oxidation by armoring the reaction surface on Mn-oxides as well as lowering Cr(III) concentration available for the oxidation reaction.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.4
• /
• pp.369-376
• /
• 2007

우리는 마이카, boron nitride, bismuthoxychloride와 같은 판상 분체에 ZnO 나노입자를 코팅한 고 기능성 무기 분체를 합성하였다. 본 실험에서 우리는 수열침전법을 이용하여 합성 분체를 합성하였다. 출발물질은 $ZnCl_2$를 사용하였고 침전제로는 hexamethylenetetramine(HMT)와 urea를 사용하였다. 본 실험의 반응변수로는 출발물질의 농도, 침전제 및 반응온도를 변화시켜 실험하였다. 합성물의 형태, 결정성 및 UV-차단능은FE-SEM, XRD, FT-IR, TGA-DTA, in vitro SPF 테스트를 활용해 분석하였다. 본 실험의 결과, 나토입자 크기를 갖는 ZnO는 동일한 최적의 합성조건하에서 다양한 판상 분체의 종류에 관계없이 균일하게 코팅되었다.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.6 s.27
• /
• pp.55-61
• /
• 2004

A numerical procedure for optimizing the shape of three-dimensional sedimentation tank is presented to maximize its sedimentation efficiency. The response surface based optimization is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis for multi-phase flow. Standard $k-{\epsilon}$ model is used as a turbulence closure. Three design variables such as, tank height to center feed wall diameter ratio, blockage ratio of center feed wall and angle of distributor are chosen as design variables. Sedimentation efficiency is defined as an objective function. Full-factorial method is used to determine the training points as a means of design of experiment. Sensitivity of each design variable on the objective function has been evaluated. And, optimal values of the design variables have been obtained.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.134-134
• /
• 2003

SnO$_2$를 모물질로 하는 가스센서는 n형 산화물 반도체로서 공기중의 산소의 흡탈착 및 전자의 수수에 의해 전기전도도의 변화로 특정 가스를 감지한다. 지금까지 반도체식 가스센서의 모물질로 가장 많이 연구되어 왔지만 아직도 선택성, 안정성 등 여러 가지 문제를 안고 있다. 그리고 개선방안으로 귀금속 촉매의 첨가 및 입자의 크기의 조절 등이 흔히 연구되어 왔다. 따라서 본 연구에서는 순수한 SnO$_2$ 를 이용하여 소결 온도 및 입자 크기에 의한 영향을 CO가스 및 수분에 대한 감도, 반응 시간을 통해 알아보았다. 수열 합성 및 침전 법으로 나노 크기의 SnO$_2$ 분말을 합성하여 스크린 인쇄법으로 후막 가스센서를 제조하였다 침전법에서 SnCl$_4$에 암모니아수로 pH=10.5로 적정하여 SnO$_2$ 분말을 얻었다. 그리고 입자 크기를 조절하기 위해 수열 합성 시 autoclave 내의 수열처리 온도를 100, 150, 20$0^{\circ}C$로 조절하여 SnO$_2$ 분말을 제조하고 입자 크기와 성분분석을 위해 XRD, SEM, TEM, BET 측정을 하였다. 그 결과 침전법으로 제조한 입자의 크기는 20nm 정도였으며 수열 처리한 SnO$_2$ 입자는 10nm이하의 미세한 입자를 얻을 수 있었다. 수열 합성 시 온도가 높아질수록 더 작은 입자 크기를 얻을 수 있었고 600, 7()0, 80$0^{\circ}C$ 열처리 후 입자성장이 침전법에 의한 SnO$_2$ 분말보다 더 작게 일어났다. 이렇게 제조한 나노크기의 SnO$_2$ 분말을 이용하여 습도 및 CO 가스에 대한 그 특실을 평가하였다. CO 20ppm에 대하여 40%정도의 감도를 보였으며 입자가 작아질수록 높은 감도를 보이는 것을 확인 할 수 있었다. 반면 CO 가스와 반응 후 회복 시 입자 의기가 작아질수록 회복이 늦어짐을 알 수 있었다. 그리고 15$0^{\circ}C$에서 습도에 대한 반응 후 회복시간을 조사해보니 같은 결과를 얻을 수 있었다. 이것은 입자 필기가 작아질수록 많은 흡착 사이트를 제공함으로써 높은 감도를 가지지만 반면 다량의 흡착된 가스들이 탈착 하는데 더 많은 시간이 소요되었기 때문이다.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.73.1-73.1
• /
• 2000

• 한국도로학회:학술대회논문집
• /
• 2010.09a
• /
• pp.203-210
• /
• 2010

• Korean Journal of Veterinary Research
• /
• v.6 no.1
• /
• pp.10-17
• /
• 1966

The antigenecity of somatic substances of S. pullorum standard strain and variant strain extracted byheat treatment, acid treatment and their modification, ammonium sulfate saturation (60 per cent), trypsin digestion was tested by indirest hemagglutination test and precipitation test and following results were optained. 1. Teatment at $100^{\circ}C$ for an hour of the bacteria could extract the antigen of S. pullorum standard strain and variant strain which was demonstrable by hemagglutination reaction with the human a group and chicken red blood cell. 2. Trypsin digestion was more enhanced its antigenecity in acid extracted antigen of S. pullorum variant strain compare with the S. pullorum standard strain. 3. The extracted antigenic substances of S. pullorum standard strain existed chiefly in the elicited fraction of precipitate at the treatment of ammonium sulfate saturation and after trypsin digestion, its antigenecity was demonstrated by hemagglutination. 4. At the treatment of ammonium sulfate treatment, did not occur the precipicate in acid extracted antigens of S. pullorum variant strain, however, the heal extracted antigen, positive reactions were obtained in both of the precipitate and supernatant fraction of the S. pullorum variant strain by hemagglutination reaction. After trypsin digestion, these fraction also exhibited positive reactions. 5. Precipitation test also tested dub could not detect in any soft of the antigens.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.3
• /
• pp.103-115
• /
• 2000

The formation of brown-colored precipitates is one of the serious problems frequently encountered in the development and supply of groundwater in Korea, because by it the water exceeds the drinking water standard in terms of color. taste. turbidity and dissolved iron concentration and of often results in scaling problem within the water supplying system. In groundwaters from the Pajoo area, brown precipitates are typically formed in a few hours after pumping-out. In this paper we examine the process of the brown precipitates' formation using the equilibrium thermodynamic and kinetic approaches, in order to understand the origin and geochemical pathway of the generation of turbidity in groundwater. The results of this study are used to suggest not only the proper pumping technique to minimize the formation of precipitates but also the optimal design of water treatment methods to improve the water quality. The bed-rock groundwater in the Pajoo area belongs to the Ca-$HCO_3$type that was evolved through water/rock (gneiss) interaction. Based on SEM-EDS and XRD analyses, the precipitates are identified as an amorphous, Fe-bearing oxides or hydroxides. By the use of multi-step filtration with pore sizes of 6, 4, 1, 0.45 and 0.2 $\mu\textrm{m}$, the precipitates mostly fall in the colloidal size (1 to 0.45 $\mu\textrm{m}$) but are concentrated (about 81%) in the range of 1 to 6 $\mu\textrm{m}$in teams of mass (weight) distribution. Large amounts of dissolved iron were possibly originated from dissolution of clinochlore in cataclasite which contains high amounts of Fe (up to 3 wt.%). The calculation of saturation index (using a computer code PHREEQC), as well as the examination of pH-Eh stability relations, also indicate that the final precipitates are Fe-oxy-hydroxide that is formed by the change of water chemistry (mainly, oxidation) due to the exposure to oxygen during the pumping-out of Fe(II)-bearing, reduced groundwater. After pumping-out, the groundwater shows the progressive decreases of pH, DO and alkalinity with elapsed time. However, turbidity increases and then decreases with time. The decrease of dissolved Fe concentration as a function of elapsed time after pumping-out is expressed as a regression equation Fe(II)=10.l exp(-0.0009t). The oxidation reaction due to the influx of free oxygen during the pumping and storage of groundwater results in the formation of brown precipitates, which is dependent on time, $Po_2$and pH. In order to obtain drinkable water quality, therefore, the precipitates should be removed by filtering after the stepwise storage and aeration in tanks with sufficient volume for sufficient time. Particle size distribution data also suggest that step-wise filtration would be cost-effective. To minimize the scaling within wells, the continued (if possible) pumping within the optimum pumping rate is recommended because this technique will be most effective for minimizing the mixing between deep Fe(II)-rich water and shallow $O_2$-rich water. The simultaneous pumping of shallow $O_2$-rich water in different wells is also recommended.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.5
• /
• pp.51-57
• /
• 2012

The purpose of study is to understand the possibility of biogrout of soil induced by bacteria. Microbial Calcium Carbonate Precipitation(MCP) has been analysed using the microorganism Bacillus Pasteurii. In order to understand the biogrout of soft ground treated with microbial calcium carbonate precipitation, four types of specimens(sterilization soil, non-sterilization soil, reaction solution and microorganism solution with pre-treatment mix and reaction solution and microorganism solution with post-treatment mix) were made. Scanning Electron Microscope(SEM), EDX and X-ray diffraction(XRD) analyses were performed on the soft ground specimens. On the basis of the preliminary results, it appears that microbial treatment methods using calcium carbonate precipitation may be possible to improve property of biogrout.