• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.459-468
• /
• 2019

Purpose: The cavity exploration of the lower part of the road is carried out to prevent ground-sinking. However, the detected communities cannot be identified by the cavity location and history information, such as repackaging the pavement. Therefore, the field applicability of RFID systems was evaluated in this study to enable anyone to accurately identify information. Method: During temporary recovery, tag recognition distance and recognition rate were measured according to underground burial materials and telecommunication tubes using RFID systems with electronic tag chips attached to the bottom of the rubber cap. Result: The perceived distance and perceived rate of depth for each position of the electron tag did not significantly affect the depth up to 15cm, but it did have some effect if the depth was 20cm. In addition, water effects from nearby underground facilities and rainfall are relatively small, and the effects of wind will need to be considered during the weather conditions of the road. Conclusion: The RFID tags for field application of the pavement management system store various information such as location and size of cavity, identification date, cause of occurrence, and surrounding underground facilities to maximize cavity management effect with a system that can be computerized and mobile utilization.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.5
• /
• pp.52-60
• /
• 2019

The APR1400 is a 1400MWe nuclear power plant developed through national technology development project over a period about 10years. Approximately 65,000 design drawings are produced for APR1400 construction. In order to maintain consistency among numerous drawings, the highest level of design bases drawings (DBDs) are created according to design bases and this is used in the subsequent design. However, DBDs are produced and managed on a document basis and they are managed various field, it was difficult to accurately reflect the design bases information in the subsequent design. Therefore, this study recognizes limitations of the document based DBDs and develops a system that can accurately reflect the design bases information to subsequent design by adopting BIM based design bases integrated information system. Especially, by introducing DBIL(Design Bases Information Layer) concept, DBIL was created and analyzed based on five design bases(Physical protection, Fire protection, Internal missile protection, Internal flood protection, Radiation protection) applied to APR1400. In the final result DBIL set and Datasheet are integrated of room, design bases information, building data(wall, slab, door, window, penetrations). So it can be used for subsequent design automation and design verification. Furthermore, it is expected that APR1400 DBILs data can be used extensively in constructability and design economics analysis through comparison with next generation nuclear power plant.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_2
• /
• pp.1709-1722
• /
• 2022

The rise in temperature induced by global warming caused in El Nino and La Nina, and abnormally changed the temperature of seawater. Rainfall concentrates in some locations due to abnormal variations in seawater temperature, causing frequent abnormal floods. It is important to rapidly detect flooded regions to recover and prevent human and property damage caused by floods. This is possible with synthetic aperture radar. This study aims to generate a model that directly derives flood-damaged areas by using modified U-NET and TerraSAR-X images based on Multi Kernel to reduce the effect of speckle noise through various characteristic map extraction and using two images before and after flooding as input data. To that purpose, two synthetic aperture radar (SAR) images were preprocessed to generate the model's input data, which was then applied to the modified U-NET structure to train the flood detection deep learning model. Through this method, the flood area could be detected at a high level with an average F1 score value of 0.966. This result is expected to contribute to the rapid recovery of flood-stricken areas and the derivation of flood-prevention measures.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.1
• /
• pp.50-61
• /
• 2010

This study was carried out to find out the way to build a comprehensive wetland ecosystem database using the technique of remote sensing and Geographic Information System. A Landsat TM image (taken in Oct. 30, 2002), Kompsat-2 images (Jan. 17, 2008 & Nov. 20, 2008), LiDAR(Mar. 1, 2009) were used for the primary source for the image analysis. Field surveys were conducted March to August of 2009 to help image analysis and examine the results. An actual wetland vegetation map was created based on the field survey. Satellite images were analyzed by unsupervised and supervised classification methods and finally categorized into such classes as Phragmites australis community, mixed community, sand beach, Scirpus planiculmis community and non-vegetation intertidal area. The map of wetland productivity was developed based on the productivity of Phragmites australis and the relationship to the proximity of adjacent water bodies. The developed 3 dimensional wetland map showed such several potential applications as flood inundation, birds flyway viewsheds and benthos distribution. Considering these results, we concluded that it is possible to use the remote sensing and GIS techniques for producing wetland ecosystem spatial database and these techniques are very effective for the development of the national wetland inventory in Korea.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.179-190
• /
• 2001

In this proposed study, observing and analyzing contrast enhanced abdominal CT images, we segmented the liver automatically. We computed the ratio of each gray value from the estimated gray value range. With the average value of mesh image, we distinguished the liver from the noise parts. We divided the region based on immersion simulation. The threshold value is determined from the mesh image which is generated from each gray value portion of the liver and is used in dividing the liver to the noise region. To get the outline of the liver, we generated template image which represents the lump of the liver, and subtracted it from the binary image. With the results we use the proposed algorithm using 8-connectivity instead of the present opening algorithm, to reduce the processing time. We computed the volume from the segmented organ size and presented a clinical demonstration with the animal experiment

• Journal of Korea Water Resources Association
• /
• v.45 no.10
• /
• pp.1009-1022
• /
• 2012

This study approach the conflict in the process of promoting Dam construction plan from a hydrological method and comprehend the cause of conflict on conservation and flood collect all interested parties direct involvement and develop Shared Vision Model (SVM) to plan simulation and result. We forecast water for living, industrial water and agricultural water in each administrative district on conservation and simulate promptly in case that each structural alternative is formed and suggest water level deduction effect and change of area on watted surface and damage and organize the system to draw and agreement through exchanging mutual opinion. Also, it considered to contribute meditation and soften of conflict by securing accuracy of releasing information and trust of the result.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.4
• /
• pp.352-359
• /
• 2012

An experiment was carried out to figure out the turbulence flow characteristics in the wake of the transom stern's 2-dimensional section by 2-frame grey level cross correlation PIV method at Re= $3.5{\times}10^3$, Re= $7.0{\times}10^3$. The angles of transom stern are $45^{\circ}$(Model "A"), $90^{\circ}$(Model "B") and $135^{\circ}$(Model "C") respectively. The depth of wetted surface is 40mm from free surface. Strong turbulence intensity appears at the interaction between the flow separation of the bottom of a model and the free surface. This study provides statistic flow information such as turbulence intensity, Reynolds stress and turbulence kinetic energy. Model C type (Raked transom) has low Reynolds stress and turbulence kinetic energy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6597-6601
• /
• 2013

This study aims at suggesting a evaluation method of water cycle soundness in U-City. The distortion of water cycle soundness induced industrialization and urbanization was quantitatively analyzed. In order to evaluate the soundness of water cycle in U-City the reduction ratio of runoff was evaluated in comparison of before the construction of the water recycling facilities for natural water cycle, the reduction ratio of urban water was evaluated in comparison of before the introduction of the artificial recycling facilities for artificial water cycle.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.369-377
• /
• 2018

EAP, which is operated on the frame of Risk Alarm 4-stage of National Risk Management Guideline, is a critical method in order to promptly respond to disasters. Korea Flood Control Office issues major and moderate flood alarm at each river station by respectively 50% and 70% of design flood discharge in terms of watermark or sea level, however, the criteria deciding major and moderate floods are vague for field managers to control the disaster situations. On the other hand, Japan and USA use river water level as a main criterion in order to classify the stage of flood disaster, which is higher design flood level than Korea. Thus, the authors analyzed domestic and oversea EAP guidelines and suggested improved criteria showing easy display method and raising the criteria of flood level for reflecting more effective action plans through testing a simulation training on the test-bed.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.277-280
• /
• 2010

The prevention of disasters is important to prepare in advance through analysis and an estimate. But for all the efforts of the government to stave off disasters, the damage out of a guerilla localized heavy rain caused the global warming, a landslide and inundation is growing. To prevent these damages, the basic data and system through systematic research and analysis should be set up. But it is true that collecting of the basic data and the system for preventing disasters are either constructing or insufficient so far. In this research, by using topography spatial data including LiDAR data including the aerial photo and digital maps, and etc. the factor of a disaster, the disaster risk element was extracted. Moreover, the disaster region about the disaster generation available region was evaluated in advance using the easy disaster analysis of current situation photo map which made with the grid analysis method and weighted value estimate technique.