• Research in Plant Disease
• /
• v.10 no.4
• /
• pp.337-340
• /
• 2004

In April of 2003, the gray mold disease caused by Botrytis cinerea was occured in zinnia seedlings grown in greenhouse at Gyeongsangnam-do Agricultural Research and Extension Services, and farmer's nursery. The symptoms of infected plants were started with water-soaking lesions in flower bud, leaves and stems. The lesions gradually expanded and infected plants became withered and discolored to gray or dark from the tip. The conidia and mycelia of the pathogen were appeared on flowers, leaves and stem. The conidia were gray, 1-celled, mostly ellipsoid or ovoid in shape and were 5${\sim}$16 ${\times}$ 4${\sim}$8 ${\mu}m$ in size. Conidiophores were 12${\sim}$28 ${\mu}m$ in size. The pathogenic fungi formed sclerotia abundantly on potato dextrose agar. The optimum temperature for sclerotial formation was $20^{\circ}C$. Pathogenicity of the causal organism was proved according to Koch's postulate. The causal organism was identified as Botrytis cinerea Persoon: Fries based on mycological characteristics. This is the first report on gray mold of Zinnia elegans caused by Botrytis cinerea in Korea.

• Research in Plant Disease
• /
• v.17 no.3
• /
• pp.399-401
• /
• 2011

Stem rot of Stachys sieboldii occurred sporadically in the farmer's fields at Shindeung-myeon, Sancheonggun, Gyeongnam province in Korea. The infected leaves and stems are water-soaked, rotted, wilted and finally leads to the death of the whole plants. The sclerotia, 1-3 mm, white to brown, globoid, were formed on lesions and the surface of soil line. The optimum temperature for mycelial growth and sclerotia formation was $30^{\circ}C$ on potato dextrose agar. The typical clamp connections were observed in the hyphae of the fungus. On the basis of mycological characteristics and pathogenicity to host plants, this fungus was identified as Sclerotium rolfsii Saccardo. This is the first report of stem rot on S. sieboldii caused by S. rolfsii in Korea.

• Journal of Sericultural and Entomological Science
• /
• v.37 no.1
• /
• pp.86-91
• /
• 1995

Isolation and pathogenicity of Fusarium spp. from mulberry shoot rot and severity of diseases which were known as bacterial blight were examined on four mulberry varieties in Suwon, Kongju and Chuncheon, A symptom of mulberry shoot rot was initiated long brown spot on young leaves and shoots. It was developed into dark brown spot and produced white mycelia and spores on the diseased symptoms. A symptom of bacterial blight showed leaf rolling and water soaking spot and produced bacterial ooze on leaf and shoot However later stage of upper two types of symptom was hardly distinguished. Severities of shoot rot and bacterial blight were 7.5% and 4.4% in Suwon, respectively. Isolation of Fusarium spp. on shoot rot symptoms was highter than that on bacterial blight symptoms, but isolation of Pseudomonas spp. was higher on bacterial blight symptoms. Trends of pathogenicity of Fusarium spp. and Pseudomonas spp. were similar to inoculation works, and isolations of pathogenic Fusarium spp. from center of symptom was higher than that from 30cm of symptom of all samples in three cultivation areas. Disease severities of shoot rot on variety of Kaeryangppong were 13.9%, 15.9% and 17.2% in Suwon, Kongju and Chuncheon, respectively. However variety of Cheongolppong was highly resistant to shoot rot disease in three cultivation areas.

• The Korean Journal of Mycology
• /
• v.32 no.1
• /
• pp.50-53
• /
• 2004

In March of 2003, the gray mold occurred severely on pea (Pisum sativum) grown in the green houses and open fields in Changseon-myon, Namhae-gun, Gyeongnam Province, Korea. The symptoms started with water-soaking lesions in the leaves, stems and pods. The typical symptoms of the leaves, stems and pods became withered, discolored and blighted, and then eventually died. The mycelia, conidia and conidiophore of the pathogen appeared on leaves, stems and pods. The conidia were gray, 1-celled, mostly ellipsoid or ovoid in the shape and were $8{\sim}17{\times}5{\sim}13\;{\mu}m$ in size. Conidiophores were $14{\sim}30\;{\mu}m$ in size. The sclerotia were formed abundantly on potato dextrose agar. The optimum temperature for sclerotial formation was $20^{\circ}C$. Pathogenicity of the causal organism was proven according to Koch's postulate. The causal organism was identified as Botrytis cinerea based on mycological characteristics. This is the first report on gray mold of Pisum sativum caused by B. cinerea in Korea.

• Korean Journal of Materials Research
• /
• v.28 no.6
• /
• pp.324-329
• /
• 2018

Needle-like NiO protecting layers on NiCrAl alloy foam, used as support for hydrogen production, are introduced through electroplated Ni and subsequent microwave annealing. To improve the stability of the NiCrAl alloy foam, oxygen concentration of microwave annealing to form a needle-like NiO layer with good chemical stability and corrosion resistance is controlled in a range of 20 and 50 %. As the oxygen concentration increases to 50 %, needle-like NiO forms a dense coating layer on the NiCrAl alloy foam; this layer formation can be attributed to accelerated growth of the (200) plane. In addition, the increased oxygen concentration causes increased NiO/Ni ratio of the resultant coating layer on NiCrAl alloy foam due to improved rate of the oxidation reaction. As a result, the introduction of dense needle-like NiO layers formed at 50 % oxygen concentration improves the chemical stability of the NiCrAl alloy foam by protecting the direct electrochemical reaction between the electrolyte and the foam. Thus, needle-like NiO can be proposed as a superb protecting layer to improve the chemical stability of NiCrAl alloy form.

• The Korean Journal of Mycology
• /
• v.45 no.3
• /
• pp.251-257
• /
• 2017

The occurrence of gray mold on Rubus crataegifolius has recently been reported in Pohang, Gyeongbuk province, Korea. The initial symptom was the appearance of small brown spots on the leaves, and these lesions became later covered with a gray fungus as the disease progressed. A fungus was isolated from symptomatic leaves and incubated. Through morphological and phylogenetic analyses, the causal agent of the disease was identified to be Botrytis cinerea. The fungal isolate was then used to inoculate on the leaves of healthy plants to determine its pathogenicity as the causal agent of gray mold as per Koch's postulates. The inoculated leaves showed the same symptoms as the originally infected plant, and the fungal pathogen re-isolated from the lesions showed the same morphological characteristics as the original pathogen. This is the first report on the occurrence of gray mold on R. crataegifolius caused by B. cinerea in Korea.

• The Korean Journal of Mycology
• /
• v.30 no.2
• /
• pp.166-169
• /
• 2002

A fruits soft rot caused by Rhizopus stolonifer found on citrus fruit in Jinjn City Agricultural Products Wholesale Market. The disease infection usually started from wounding. At first, the lesions started water soaked and rapidly softened and diseased lesion gradually expanded to other fruits in the same container. The mycelia grew vigorously on the surface of fruits and formed sporangia, sporangiophores and stolons. Sporangiophores were $900{\sim}4300{\mu}m$ in size. Sporangia were globose or subglobose and $98{\times}346{\mu}m$ in size. The color of sporangia was white at first and then turned black with many spores. Columella were globose or ellipsoid and $60{\sim}216{\times}72{\sim}143{\mu}m$ in size. Sporangiospores were globose or ellipsoid, brownish-black streaked and $8{\sim}18.3{\mu}m$ in diameter. Zygospores were globose, black and $98{\sim}176{\mu}m$ in size. The optimum temperature for mycelial growth of the fungus on PDA was $25^{\circ}C$. The causal fungus was identified as Rhizopus stolonifer. This is the first report of rhizopus soft rot on citrus fruit caused by R. stolonifer in Korea.

• Journal of the Korean Institute of Gas
• /
• v.4 no.2 s.10
• /
• pp.1-6
• /
• 2000

In this experiment, we made the plasma reactor which adhere needle electrode in order to treat safely an NOx which was included in the gas. Also we experimently investigated characteristics of equipment and inspected efficiency. As a reaction gas, by using mixture gas of $NO/N_2$ and $N_2/O_2$, we setted up initial NO concentration and gas flow rate was set at 2 ${\iota}$/min. As a reaction characteristics of NOx, when discharge input power was high, NO concentration decreased and when the oxygen concentration increased, the NO decomposition was easy and decomposition energy efficiency was high. Also in case that NO concentration increased, NO decomposition energy efficiency was high but decomposition rate was low. The characteristics of ozone, when discharge input power was high, ozone increased and when $NO/N_2$ concentration increased, the ozone decreased.

• Journal of the Korean Institute of Gas
• /
• v.17 no.1
• /
• pp.19-25
• /
• 2013

The joining methods of steel structures of gas facilities, bridges, ships etc. by welding are composed mostly of T-type or cruciform fillet welding and full penetration or partial penetration according to the uses and the shape of the structures. In this study, it was examined the characteristics of fatigue crack according to penetration depth in relation to material thickness in the cruciform fillet welded joints. From the results, it was investigated the safe design stresses within the range of infinite life. When the LOP length is long the range of infinite life is small with root failure and when the LOP length is short the range of infinite life is large with teo failure. For the specimen of material thickness, 20mm welded by 3 pass compared with 10mm, 15mm welded by 2 pass, the fatigue strength and the range of infinite life was more improved by increasing of notch toughness from formation of micro-ferrite acicular structure.

• Research in Plant Disease
• /
• v.21 no.4
• /
• pp.334-336
• /
• 2015

Sclerotium rot on Pulsatilla koreana was observed in the exhibition field of Jinju Agriculture Technology Center in July 2013. The infected plants showed water-soaked, blighted and rotted symptoms. White mycelial mats spread over lesions, and then numerous sclerotia were formed on flower stalk and flower stem near the soil line. The sclerotia were globoid in shape, 1-3 mm in size and white to brown in color. The optimum temperature for mycelial growth and sclerotia formation on PDA was $30^{\circ}C$ and the hyphal width was $4-8{\mu}m$. The typical clamp connections were observed in the hyphae of the fungus grown on PDA. For molecular identification, the complete ITS rDNA sequence of the causal fungus was sequenced and analyzed. On the basis of mycological characteristics, ITS rDNA sequence analysis, and pathogenicity to host plants, this fungus was identified as Sclerotium rolfsii Saccardo. This is the first report of sclerotium rot on Pulsatilla koreana caused by S. rolfsii in Korea.