• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.1
• /
• pp.15-30
• /
• 1996

저작은 치아, 악골, 저작근 뿐만 아니라 근 신경계, 고위 중추까지 복합적으로 관여되는 기능적 행위이다. 저작 형태는 다양한 모양을 가지나 두 가지 전형적인 군, 즉, 전방에서 관찰 시 그 양상이 수직적이며 절단 (chopping) 운동을 하는 군과 주로 측방으로 이루어지며 연마 (grinding)를 하는 군으로 나눌 수 있다. 본 연구의 목적은 저작 형태의 차이가 교합면 마모에 미치는 영향을 조사하는 것이다. 두개 하악 관절과 저작 습관에 이상이 없으며 교합면에 수복물이 없는 치과 대학생으로 하악 운동 궤적 기록기를 이용하여 상기의 전형적인 2가지 저작 형태를 보이는 각 15명씩을 피검자로 선택하였다. 각 피검자에 대한 임상 검사를 통해 ordinal scale로 교합면 마모의 등급을 조사하여, 평균 치아 마모도와 부위에 따른 치아 마모도를 비교 조사하였다. 각 피검자에 대한 인상 채득 후 모형을 제작하고 arbitrary scale로 교합면 마모의 등급을 조사하여, 평균 치아 마모도와 부위에 따른 치아 마모도를 비교 조사하고 저작측과 비저작측 마모를 비교 조사하였으며 수평 마모면과 수직 마모면을 비교 조사하였다. 1. 평균 치아 마모도는 ordinal scale로 측정하였을 때, 절단형과 연마형간에 유의할 만한 차이가 없었다.(p >0.05) 2. 부위에 따른 치아의 마모도는 ordinal scale로 측정하였을 때, 절단형과 연마형간에 유의할 만한 차이가 없었다.(p >0.05) 3. 평균 치아 마모도는 arbitrary scale로 측정하였을 때, 절단형에 비교하여 연마형에서 높은 마모도를 보였다.(p<0.05). 4. 절단형에 비교하여 연마형은 arbitrary scale로 측정하였을 때, 구치부에서는 높은 마모도를 보였으며 전치부에서는 유의할 만한 차이가 없었다(p<0.05) 5. 구치 평균 치아 마모도와 부위에 따른 치아의 마모도는 균형측에서 절단형과 연마형간에 유의할 만한 차이를 보이지 않았다(p>0.05). 6. 전치 평균 치아 마모도와 부위에 따른 치아의 마모도는 수평 마모면과 수직 마모면 비교시, 절단형과 연마형간에 유의할 만한 차이를 보이지 않았다.(p>0.05)

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.5
• /
• pp.683-700
• /
• 1998

치아경조직의 소실은 반드시 치아우식증이나 사고에 의해서만 일어나는 것이 아니라 마모에 의해서도 일어난다. 마모에 영향을 미치는 인자들은 시간/나이, 성별, 이갈이와 같은 과기능, 저작력, 위장관장애, 음식물, 환경적인 영향, 타액의 상태 그리고 교합적인 조건들이 있다. 한편 중심위와 최대교두감합위 불일치가 악구강계에 미치는 영향에 관해서는 아직도 논란이 분분하다. 본 연구의 목적은 중심위와 최대교두감합위의 불일치가 치아마모에 미치는 영향과 중심위에서 제일 먼저 닿는 치아와 나머지 치아의 마모에 있어서 차이에 대해서 알아 보는 것이다. 본 연구는 두개하악관절과 저작습관에 이상이 없으며, 식이습관에 문제가 없으며 치아우식증과 치주질환, 수복물, 교정 또는 교합치료의 경험이 없는 21세에서 25세 사이의 서울대학교 치과대학생을 대상으로 하였다. 교합기를 이용하여 중심위 교합-최대교두교두감합위 불일치를 조사하여, 중심위 교합-최대교두감합위가 불일치가 작은 군과 큰 군으로 나누었다. 각 군은 각각 10명의 피검자들로 구성되었다. 각 피검자의 인상채득 후 CR mounting을 시행하고 중심위교합-최대감합위 불일치를 측정한 다음 임상검사로 ordinal scale을 측정하고 모형을 통해 arbitrary scale을 측정하였다. 평균치아마모도 그리고 중심위에서 먼저 닿는 치아와 나머지 치아, 나머지 구치의 마모도를 각각 조사하여 통계처리하였다. 1. 평균치아마모도는 ordinal scale로 측정하였을 때 중심위 교합-최대교두감합위 불일치가 작은 군과 큰 군 사이에 통계적으로 유의할만한 차이가 없었다(p>0.05) 2. 평균치아마모도는 arbitrary scale로 측정하였을 때 중심위 교합-최대교두감합위 불일치가 작은 군과 큰 군 사이에 통계적으로 유의할만한 차이가 없었다(p>0.05). 3. CR에서 먼저 닿는 치아와 나머지 치아, 나머지 구치의 마모도는 ordinal scale로 측정하였을 때 통계적으로 유의한 차이가 없었다(p>0.05). 4. CR에서 먼저 닿는 치아와 나머지 치아, 나머지 구치의 마모도는 arbitrary scale로 측정하였을 때 먼저 닿는 치아에서 통계적으로 유의한 높은 수준의 마모도를 보였다(p<0.05).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.137-146
• /
• 2018

Tooth wear is a multifactorial condition, leading to the loss of dental hard tissues. While for many years, tooth wear was a condition of little interest in daily clinical practice, nowadays this is changed. Tooth wear is becoming increasingly significant in maintaining the long-term health of the dentition. This becomes especially important when the dentition is kept relatively intact in the contemporary ageing population, and edentulism is decreasing. There is also evidence that the prevalence of tooth wear is growing. It is a natural consequence of the unidirectionality of tooth wear that it is frequently used as a means of individual age estimation. Tooth wear was very serious in ancient populations up to the medieval period. Tooth wear is thus studied in a wide variety of areas. The purpose of this paper is to summarize and analyze the many issues surrounding tooth wear through recent studies in various fields and to search for future research direction.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.113-122
• /
• 2019

Tooth wear is gradually increasing with increasing life expectancy. In particular, it is important to establish a treatment plan in the early stages so that it does not proceed to moderate or severe wear stages. It is essential to diagnose tooth wear accurately in order to plan a treatment for it. There are many risk factors including age, diet, and drugs which affects tooth wear. For the diagnosis of a tooth wear, appropriate index and evaluation method should be used. There were various tooth wear indices such as TWI, Lussi index, BEWE, and TWES. The evaluation method includes clinical examination, dental cast examination and clinical photographs. Recently, a 3D scanner is being used to assess tooth wear. The risk factors, tooth wear evaluation system, the methods of measuring tooth wear, and related literature were reviewed. The strengths and weaknesses of each index and evaluation methods were compared to derive a proper way to diagnose tooth wear.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.121-129
• /
• 2020

From the point of view of oral rehabilitation, the treatment of extensive tooth wear requires a prosthetic approach. Physiological tooth wear is considered as a normal process and generally does not require treatment, but excessive tooth wear causes problems like inadequate occlusion and esthetics. Changes of occlusal vertical dimension should be made through accurate diagnosis and analysis. Also, the patient's adaptation to the changed occlusal vertical dimension should be assessed over time. This case was a 60-year-old male patient who complained of a decrease in chewing function and esthetics due to severe tooth wear. Full-mouth rehabilitation was performed with a tooth supported fixed prosthesis. An occlusal stabilization splint and provisional restoration were used to evaluate the adaptation to increased occlusal vertical dimension and induce a stable centric relation position. After that, monolithic zirconia prosthesis was delivered. We report this as a satisfactory functional recovery and esthetics.

• Journal of dental hygiene science
• /
• v.13 no.1
• /
• pp.83-90
• /
• 2013

The aim of this study was to evaluate the abrasive effect and cleaning power of toothpaste containing tetrasodium pyrophosphate and cellulose. The relative dentin abrasivity, cleaning power by modified Stookey method, dentin abrasivity of brushing after Cola treatment and consumer survey were investigated with control toothpaste containing dental type silica as an abrasive. The results obtained were as follows: 1. Experimental toothpaste hardly influenced dentin abrasivity, but control toothpaste had an effect on dentin abrasivity significantly (p<0.05). 2. There was no significant difference in cleaning power between experimental and control toothpaste (p>0.05). 3. Experimental toothpaste hardly influenced dentin abrasivity, despite 100 or 1,000 times of brushing after Cola treatment, but control toothpaste showed a big increase in dentin abrasivity as the number of brushing has been increased (p<0.05). 4. According to the consumer survey results, there was no difference between control and experimental toothpaste in the satisfaction rate of refreshing sensation, the satisfaction rate of the lasting effect of refreshing sensation and the overall satisfaction rate of the toothpaste (p>0.05). These results showed a possibility to make abrasive free toothpaste having cleaning power without dentin abrasivity.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.347-353
• /
• 2018

Gradual attrition is a normal process of aging, but severe attrition causes occlusal disharmony, functional disorder and esthetic problems. The collapse of posterior support may cause attrition of anterior teeth, and loss of occlusal vertical dimension (OVD). And it induces the pathologic change of the TMJ, unaesthetic facial appearance and decreased masticatory function. In this case, 70 year-old male presented with decreased vertical dimension and esthetic problems due to worn dentition. Based on assessment of intraoral findings, diagnostic cast and radiographic examination, full-mouth rehabilitation with increase of OVD was planned. After 10 month follow-up, occlusal stability is maintained and through this procedure, satisfactory outcomes were achieved in esthetic and functional aspects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.369-377
• /
• 2020

Gradual teeth wear is normal physiological progress, severe tooth wear can causes dysfunction, occlusal plane disharmony and esthetic problems. If additional space is needed for prosthetic restoration due to severe attrition, full mouth rehabilitation with increase of occlusal vertical dimension may be considered. In this case, 72 year old male patient with severe worn dentition, irregular gingival zenith and deep anterior bite was treated by full mouth rehabilitation for regaining the space for restoration, improving relationship and esthetic of anterior teeth. Provisional restoration obtained by systemic analysis, diagnosis and re-evaluation for a sufficient time was replicated to final restorations through double scanning technique using monolithic zirconia blocks. Satisfactory functional and esthetic outcomes were obtained.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.49-56
• /
• 2019

Generalized severely worn dentition causes occlusal disharmony, esthetic problems, and temporomandibular joint disorders. In order to solve these problems, it is necessary to make a precise analysis of vertical dimension and treatment plans considering it. This case report demonstrates the complete mouth rehabilitation of a 58-year-old male patient with a lot of worn teeth by increasing vertical dimension. Provisional restorations were cemented and after 4 months of evaluation for patient's compliance, permanent prostheses were fabricated. With these treatments, functionally and esthetically satisfactory results were obtained.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.153-159
• /
• 2019

Purpose: Aims to analyze the occlusal wear patterns in maxillary posterior teeth with palatal side abfractions and study the association between occlusal force and abfractions. Materials and Methods: This study was conducted in a total of 308 teeth from 148 patients with palatal side abfractions in maxillary posterior teeth. The occlusal wears in maxillary premolars and molars with palatal side abfractions were classified and recorded. The classification was done by type of teeth, age, and gender, and in order to evaluate the statistical significance between groups, chi-square test was conducted (${\alpha}=0.05$). Results: Palatal side abfractions in maxillary posterior teeth were observed at the highest frequency in the 1st molars, and in all teeth with palatal side abfractions, more than one occlusal wear was observed. In classification by type of teeth, by age, and by gender, the occlusal wears in teeth with palatal side abfractions were observed at high frequency in cuspal inclined plane, central fossa, and marginal ridge, and there was a statistical significance (P < 0.05). Conclusion: Palatal side abfractions were observed at the highest frequency in maxillary 1st molars, and in all maxillary posterior teeth where palatal side abfractions were found, the occlusal wears were observed. And the occlusal wears were observed at high frequency in cuspal inclined plane, central fossa and marginal ridge. Such results show that abfraction is associated with occlusal force.