• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.266-270
• /
• 2007

Small injection molded articles such as lens and mobile product's parts are usually molded in multi-cavity mold. The problems occurred in multi-cavity molding are flow imbalance among the cavities. The flow imbalance affects on the dimensions and physical properties of molded articles. First of all, the origin of flow imbalance is geometrical imbalance of delivery system. However, even the geometry of delivery system is balanced well the cavity imbalance is being developed. This comes from the unsuitable operational conditions of injection molding. Among the operational conditions, injection speed is the most significant process variable affecting the filling imbalances in multi-cavity injection molding. In this study, experimental study of flow imbalance has been conducted for various injection speeds and materials. Also, the filling Imbalances were compared with CAE results. The dimensions and physical state of multi-cavity molded parts were examined. The results showed that the filling imbalances vary according to the injection speed and flow property of resins. Subsequently, the imbalanced filling and pressure distribution in the multi-cavity affect on the dimensions and physical states of molded parts.

• The Research Journal of the Costume Culture
• /
• v.13 no.4 s.57
• /
• pp.646-657
• /
• 2005

The purpose of this study was to analyze the problems of brands preferred by adolescents on sizing system and grading method and to provide a basic information for adolescent apparel manufacturers. Brands preffered by adolescents were obtained via a questionnaire from adolescents aged from 13 to 18 in Seoul and finally we selected upper 12 brands out of 20 brands they preffered. Also the graders of 12 brands were surveyed through direct interviews. The results indicated only 2 brands out of 12 brands(such as Adidas and Basic House) manufactured apparels for adolescents and most brands targeted customers in their early twenties as a main target market. As a results of researching the sizing system of 12 brands, women's apparel brands produced two sizes separately for upper and lower garments, unisex apparel brands produced garments in 4${\~}$8 sizes. For most of the brands, each size has a dimensional deviation on the same rate in all parts and 12 brands manufactured garments mainly with a dimensional deviation of 5cm in bust circumference and hip circumference.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.447-451
• /
• 2017

하천은 지역별, 하천별 고유한 유역형상과 유출특성을 갖고 있어 계획과 관리를 위한 계획하폭 산정공식은 지역고유의 수문학적, 지역적 특성에 따라 달라야 하지만, 현재 적용되고 있는 설계기준의 계획하폭 산정공식은 최근 강우 경향 및 하천 주변 토지이용 고도화 등의 지역특성 여건변화가 고려되지 못하고 있는 실정이다. 특히 소하천의 경우에는 중 대규모의 하천과 달리 계획하폭 산정을 위한 지역별 매개변수의 편차가 커기존 산정된 공식을 활용함에 있어 어려움이 따르며, 토지이용 효율성 및 치수 경제성이 낮은 비효율적 계획하폭이 결정될 개연성이 있는 것으로 판단된다. 따라서 본 연구에서는 한반도 내륙기후특성을 가지는 강원영서지역 소하천에 대한 초기계획하폭 제안식을 산정하기 위해 계획홍수량(Q), 유역면적(A), 하상경사(S)에 대한 회귀분석을 실시하였다. 이를 통해 산정된 관계식은 기초 매개변수만 가지고 쉽게 초기계획하폭을 산정할 수 있어 지역 및 하천특성에 부합되는 개수계획 수립에 활용할 수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.75-75
• /
• 2019

첨두홍수량 자료는 홍수예경보 및 치수계획수립 등 하천관리에 있어서 매우 중요한 요소이다. 그러나 대규모 홍수가 발생 시 악천후가 동반된 기상상황이나, 현장 접근이 어려운 환경적 조건과 예산 및 인력 부족 등에 의한 불가피한 문제로 첨두홍수량을 측정하는데 어려움 있다. 따라서 일반적으로 수위-유량관계곡선식을 이용하여 첨두홍수량을 산정하지만 단순 고수위 외삽 추정을 통해 개발된 곡선식을 이용한 첨두홍수량 산정에 있어서는 주의가 필요하다. 이러한 경우 홍수가 지나간 후 현장조사를 통해 획득한 위치, 표고, 횡단면적 등 홍수흔적(flood marks)을 가지고 경사면적법(slope-area method)과 같은 간접적인 방법으로 첨두홍수량을 추정할 수 있다. 본 연구에서는 2018년 큰 호우사상이 발생한 내성천의 지류인 서천의 영주시(월호교) 지점과 남강의 산청군(하촌리) 지점에서 홍수흔적 조사를 통해 지점별 두 개의 단면을 선정하였다. 영주시(월호교) 지점의 두 단면 간 거리는 약 90m, 높이차는 약 0.21m로 조사되었고, 산청군(하촌리) 지점의 두 단면 간 거리는 약 330m, 높이차는 약 0.47m로 조사되었다. 경사면적법을 이용한 첨두 홍수량 추정에 적용된 조도계수는 '서천 하천기본계획(2014)', '남강 하천기본계획(2013)'에서 계획 홍수량 산정에 적용된 조도계수 0.029와 0.025를 적용하였다. 영주시(월호교) 지점은 2018년 9월 4일 발생한 호우사상의 첨두수위 5.59m에서 수위-유량관계곡선식을 이용하여 산정된 유량은 $1,127.8m^3/s$이고 경사면적법을 이용하여 추정된 유량은 $1,105.9m^3/s$로 약 -1.98%의 편차율이 발생하였다. 산청군(하촌리) 지점은 2018년 8월 26일 발생한 호우사상의 첨두수위 6.75m에서 수위-유량관계곡선식을 이용하여 산정된 유량은 $3,435.0m^3/s$이고 경사면적법을 이용하여 추정된 유량은 $3,233.3m^3/s$로 약 -6.24%의 편차율이 발생하였다. 경사면적법을 이용하여 추정된 첨두홍수량은 수위-유량관계곡선식을 이용하여 산정된 유량과 편차율이 지점별 ${\pm}10%$ 이내의 근사한 범위로 산정되었다. 따라서 경사면적법을 이용한 첨두홍수량 추정 방법의 적용에 있어서 적절한 것으로 판단된다.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.801-806
• /
• 2018

Germanium crystals have a dead layer that causes efficiency deterioration because the layer is not useful for detection but strongly weakens the photons. Thus, when the data provided by the manufacturer is used in the detector simulation model, there is a slight difference between the calculated efficiency and the measured efficiency.The shape and dimensions of the high purity germanium (HPGe) detector were determined by CT scans to accurately characterize the shape for the Monte Carlo roll simulation. It is found that the adjustment of the dead layer is a good match with the relative deviation of ${\pm}3%$ between the measurement efficiency and the simulation efficiency at the energy range of 50 - 1500 keV. Simulation data were compared by varying the thickness of the dead layer. The new Monte Carlo simulations were compared with the experimental results to obtain new blank layer thicknesses. The difference in dead layer results for the 1.5 mm thick end cap simulation model in 1.4 and 1.6 mm thick End Cap simulation models was a systematic error due to the accuracy of the end cap dimensions. After considering all errors including statistical errors and systematic errors, the thickness of the detector was calculated as $1.02{\pm}0.14mm$. Therefore, it was confirmed that the increase in the thickness of the dead layer causes the effect to be effected on the efficiency reduction.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.4
• /
• pp.163-170
• /
• 2008

Most of receiving rooms for the measurement of floor impact sound have rectangular shapes with couple of meters of dimension, with reflective finishing, no furniture, no curtains. Modal overlaps in those condition are the major reason for the low reproducibility, and as a matter of course, the low credibility. It is the major purpose of this study that searching for a better measurement method which mitigate the effect of modal overlap on measurement. Two ways of methods are tested. One is the way described in ISO standards which enables controlling the room modes of receiving rooms, the other is the way which enables to get more precise spatial averages in receiving rooms with room modes. It is not easy maintaining the reverberation time of low frequency bands in the range between 1s and 2s, though it is proven to be effective controlling the room modes with base traps. Space-time average SPL's through combinations of rotating microphones are easy to measure, and have good consistencies with average SPL of entire receiving room.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.101-105
• /
• 2002

FRP(Fiber glass reinforced plastics) is compound with materials, which are created to combine each other materials, of which nature of mechanical and chemical are different. Even though the weight and the thickness are identic, its physical figure of characteristic changes with consisting of lay-up and work situation. It is also a method of creating after manufacturing of mould. It has feature that manufacturing of FRP runs parallel design of material with design of structure simultaneously. The rule of FRP structure is distinguished from the length of a ship and it is hard to catch the feature of structure mechanics due to identical formula and figure used for it regardless of the shape of a ship or the speed. This studying, basing on a small FRP ship, will show te fundamental data needed to design of structure analysing the feature of intensity with direction, the method of Lay-up, and the characteristic of materials of FRP.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.122-129
• /
• 2015

In this study, a prediction model for the effective compressive strength of corner columns with intervening normal strength concrete slabs was developed. A structural analogy between high-strength concrete column-normal strength concrete slab joint and brick masonry was used to develop the prediction model. In addition, the aspect ratio of slab thickness to column dimension was considered in the models. The reliability of the new prediction model was evaluated by comparison with experimental results and its superiority was demonstrated by comparison with previous models proposed by design codes and other researchers. As a result, with average test-to-predicted ratios of 1.09, a standard deviation of 0.15, the newly developed equation provided superior predictions in terms of accuracy and consistency over all of the existing effective strength prediction approaches including KCI structural concrete design code (2012).

• Journal of Fashion Business
• /
• v.9 no.2
• /
• pp.113-130
• /
• 2005

With a view to developing male dress forms for educational purposes, human body measurement was made for male adults in their twenties residing in Busan, Korea. Based on the results, the following conclusion was obtained: 1. Comparison d the measurement in Busan and the data of the 5th Korean physical dimensions(Size Korea) In the comparison of the Busan male adults in their 20s with national physical dimensions(Size Korea) by way of the Mollison relational deviation line, all the 28 items revealed differences less than 0.7. As the Busan sample reflects the body type d the average Korean men in their 20s, Busan's measurement results can be safely used as the data for dress form development. 2. Results of front body type classification According to the factor analysis, seven factors of the front body type were produced to explain 77.25%. The factors were shoulder angles, waist height, hip shapes, chest shapes, proportion of body(chest, waist, hip)width to shoulder width and so on. Cluster analysis brought about three somatotype groups. First, the body type with the least differences in hip-waist width, shoulder-waist with, and hip angles (24,23% in appearance) was named Type H. Second, the body type with the most chest-waist width and hip angles (38.66% in appearance) was called Type Sam X Third, the body type with the greatest shoulder-chest width, shoulder-hip width, and shoulder angles (37.11% in appearance) was termed Type Y.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.466-472
• /
• 2016

In this work, a medical linear array ultrasonic transducer working in the range of 20 MHz has been developed for high-resolution ultrasonic imaging. After devising the structure of the transducer suitable for the transmission of high-frequency waves, we optimized the dimension of constituent components. Then, the process to fabricate the transducer was developed to realize the designed structure, and a prototype of the transducer was fabricated and characterized. The center frequency of the fabricated transducer was measured to be 19 MHz, and the fractional bandwidth to be 84.5 %, and the standard deviation of the sensitivity over the entire channels to be 0.74 dB. These measurement results showed good agreement with design data, which confirmed the validity of the high frequency ultrasonic transducer structure developed in this work. It was confirmed that the developed transducer with new structure had wider frequency bandwidth and uniform sensitivity than a conventional 20 MHz transducer.