• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.1
• /
• pp.120-127
• /
• 2006

The hammer-milled characteristics of waste wood materials such as lumber, plywood, particleboard(PB), MDF and railroad tic were investigated in this study. The physical and mechanical properties of recycled boards according to types of recycled particle and the mixing ratios were also studied. The hammer-milled, waste wood materials had the dimensional distributions suitable for the core layer panicle. Bending strengths of recycled boards (one layer) were shown in order of plywood, PB(laboratory-fabricated with particles used in the PB factory), lumber, tego film-overlaid plywood, MDF, waste railroad tie, PB(factory-made) and LPL-overlaid PB. Cured resin and creosote containing waste wood contributed to dimensional stability of reconstituted boards. Considering the mixing effects between lumber and plywood with recycled PB particle, lumber particle was contributive to bending strength, MOE and internal bond(IB) strength, whereas plywood particle was contributive to dimensional stability. The bending and IB strength of 3 layer boards composing only recycled waste wood particles in core layer of board were in order of lumber, plywood, PB and MDF. On the other hand, the thickness swelling was in order of PB, lumber, plywood and MDF. Bending strength of the 3 layer boards mixed with recycled PB-particle in the core layer had a decreasing tendency, as the mixing ratios of recycled PB-particles increased. The dimensional stability of 3 layer recycled board was improved as the mixing ratio of recycled PB-particle increased same as in one layer. Formaldehyde emission of boards fabricated with recycled PB-particles in the core layer of the PB was in the range of E2 grade (below 5.0mg/l).

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.155-164
• /
• 2020

In this paper, we proposed the dimensional system and pattern of middle-aged women's rashguard swimwear for breast cancer patients. First, a survey of 37 breast cancer patients was conducted to determine the preferred swimsuit design for breast cancer patients. According to a survey of breast cancer patients, a rashguard swimwear with a low-exposure chest was designed. It has a pocket shape in which the cap is easy to insert and the cap is fixed. Second, we developed a dimensional system for swimsuits for breast cancer patients. Using direct measurement data from Size Korea for 1,625 women aged 30 to 69, 17-sizes for breast cancer patient's swimsuits were set through cross-analysis of major dimensions, with a coverage rate of 74.3%. It also extracted a standard size of bust circ. 90cm, hip circ. 95cm, and trunk circ. 150cm. Third, we developed a pattern for the central size of the swimsuit for breast cancer patients. For this purpose, we first produced the first central size pattern, and then completed the pattern after modifying it through the second and third wearing experiments. Experimental suits were produced at each pattern-making stage to evaluate wearing fit and motion suitability. Finally, the reduction rate of each dimension item for optimal pattern production was obtained, and the lashguard swimwear pattern for breast cancer patients was developed.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.10
• /
• pp.185-193
• /
• 2022

This study attempted to compare and analyze the commercially available multi-use patterns to develop mask patterns suitable for the face types of adult women. Through this, it was intended to provide necessary data to mask pattern development and products. As a results of comparing the dimensions and shapes of commercial multi-use mask patterns, there was a significant difference in dimensions even though it was a L-size mask manufactured for adults. As a result of the appearance evaluation of the virtual outfit, there were significant differences by design in the vertical of the center front line, the cover and space of the mask, the height of the nose, and the lower part of the mask. The side also showed significant differences in the covering of the side of the face, the space of the side, and the width and length of the string. As a result of the appearance evaluation, Mask 4 received the best evaluation. The shape of the mask pattern had a large dart in the lower part of the nose so that it can cover the three-dimensional shape of the face, but there was a difference in the degree and angle of the curve depending on the mask. Although the upper part of the mask, the lower part of the mask, and the cheek part are in close contact, the evaluation of the mask pattern, which has room in the nose and mouth, was high. It is thought that the mask pattern should be set according to the upper length, lower length, and nose height of the mask through analysis of the face shape and dimensions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.3
• /
• pp.159-165
• /
• 1997

This paper presents the optimum dimension of 89 ton class stow-net vessel with stern-fishing. The model of basic design is developed by using the optimization techniques referring to objective function and numerous constraints as follows; speed, fishing quantity, fishing days, catch per unit effort(CPUE), and weight/ratio of main dimensions, etc. Thus, the basic design of stow-net fishing vessel is built up by using the optimization of the design variables called the economic optimization criteria, and the objective function represents the criterion which is cost benefit ratio(CBR). The main conclusions are as follows. 1. S/W for decision of optimum hull size is developed in 89 ton class stow-net fishing vessel which is constructed with optimization of the design variables called the economic optimization criteria. 2. For optimum ship dimensions in 89 ton class stow-net fishing vessel, the hull dimensions can be obtained in the range of L= 27.3m, B = 6.6m, D = 2.80m, Cb = 0.695, T/D = 0.80, $\Delta$(displacement)=281.7ton with 10 knots.

• Korean Journal of Human Ecology
• /
• v.19 no.1
• /
• pp.119-126
• /
• 2010

We need to develop a target market for elderly women by increasing the ratio of functional apparel. The purpose of this study was to provide basic data for developing a Leisure Sports Jumper and improving the quality of life of clothing for female elderly consumers. This study reviewed the current situation on the production of the functional Leisure Sports Jumper for the elderly women in literature. For the experimental study, we selected Leisure Sports Jumpers from five apparel brands, and evaluated a sensory test on 20 subjects representing the average body shape of the elderly women aged from 65 to 75. After the first sensory test, we manipulated the patterns for samples of the Leisure Sports Jumper. In the second sensory test, visual and cognitive appropriateness of the Leisure sports jumpers were assessed by the elderly women. The results of the study were as follows: the Leisure Sports Jumper of brand 'C' showed the highest appropriateness in terms of neck, armholes, and sleeves among the 5 brands. The Leisure Sports Jumper of brands 'B' and 'D' showed the lowest appropriateness in the width of the armpits among the 5 brands. Except for the length of the Leisure Sports Jumper, the margin, location of the pocket, and armholes had the lowest score in the first test showing over 3.5 points.

• Journal of the Korean Society of Costume
• /
• v.66 no.5
• /
• pp.66-81
• /
• 2016

This study is designed to understand the problems of existing Korean male soldiers' winter uniform tops by researching its current state, and contribute to developing uniforms with improved size and motion appropriateness. Military bases were visited to research satisfaction of size and motion appropriateness of the current winter uniform tops. 193 soldiers were surveyed and interviewed, and the shape and fit of the standard sizes of the inner and outer layers of the current winter uniform were analyzed. Findings of this study are as follows. 1) Compared to the new combat uniforms that soldiers were wearing in their appropriate size (of the 44 sizes), there were many cases where the soldiers were not wearing winter uniform inner (of the 8 sizes) or outer (of the 18 sizes) layers in the correct size for their body. 2) A total of 37 combat uniform sizes appropriate for the body shapes were expected to be newly applied, and inside and outside layers of winter tops would be presented as sets of 14 different sizes in step with the new combat uniform sizes, instead of the existing 8 inside layer sizes and 18 outside layer sizes. 3) The inner and outer layer of the existing winter uniform tops had several problems with the shape and fit. First, the inner layer was shorter than the combat uniform. Its shoulder width was wide, but the sleeve length was short creating lack of coverage, and the angle connecting the sleeve and bodice was very small creating a high sleeve cap curve and narrow sleeve width that make motions difficult and cause discomfort. As for the outer layer, the hem moved up when soldiers bent over or adjusted the waist string so the top could not sufficiently cover, the shoulder width was wide and the sleeve length was short, requiring improvements.

• Journal of KIISE:Software and Applications
• /
• v.31 no.6
• /
• pp.728-740
• /
• 2004

The increasing complexity and shorter life cycle of software have made it necessary to reuse software. Object-oriented development had not provided extensive reuse and computing infrastructures are evolving from mainframe to distributed environments. However, components provide more advanced means of structuring, describing and developing system, because they are more coarse-grained and have more domain-specific aspects than objects. And they are also suited for distributed environment due to their reusability and granularity. In this paper, we present a process including the static metrics and guidelines that can be applied to transform object-oriented systems into component-based systems. Our process consists of two parts: First, basic components are created based upon composition and inheritance relationships between classes. Second, intermediate system is refined into component-based system with the static metrics and guidelines we propose.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.122-122
• /
• 2011

수자원 분야에서 기후변화 관련 연구는 치수 측면 보다는 이수 측면에서 주로 이뤄지고 있다. 이는 홍수분석을 위한 시간 단위를 충족시켜주는 전지구 대기순환모형(Global Circulation Model: GCM)의 자료가 드물고, 시간 단위의 GCM 자료라 하더라도 극치값(extreme value) 표현에는 한계가 있기 때문이다. 이를 극복하기 위하여 과거 관측자료의 통계적 특성으로 극치자료의 편의(bias)를 보정하고 시간 단위로 분해하기도 한다. 하지만 이런 통계적 상세화(statistical downscaling)는 미래 기후는 과거자료와 통계적 차이가 유의하지 않음을 가정하고 있어, 미래 기후는 현재와 다를 것이라는 공감대에 는 적합하지 않다. 이와 같은 이유로 타당한 극치수문변수 결과를 얻기 위해서는 시간 단위의 고분해능(high resolution) GCM이나 지역기후모델(regional climate model)과 같은 고해상도의 미래 기후변화 자료가 필요하게 된다. 이에 국립기상연구소에서는 영국 기상청의 통합모델(UM)기반의 지역기후모델(HadGEM3)을 사용하여 50 km 및 12.5 km 격자 단위로 역학적 상세화(dynamic downscaling)를 수행하였다. 본 연구에서는 개발된 HadGEM3-RA 결과의 극치수문변수 검증을 위하여 한강유역의 관측 자료와 다양한 방법으로 비교하였다. 두 자료의 극치값을 GEV (Generalized Extreme Value) 분포에 적합(fitting)시켜 비초과확률별 극치사상과, 특정 임계값(threshold value) 이상의 극치사상 발생확률을 비교하였다. 검토 결과, HadGEM3-RA는 통계적 상세화로 구한 극치값 보다는 작았으나 기존의 지역 기후모델에 비하여 현실성 있는 극치값이 계산되었음을 확인하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.5
• /
• pp.117-126
• /
• 2020

In this study, a 3D simulation program was used to produce a bodice prototype of a middle-aged male in their 40s and 50s and then analyze the appearance evaluation and airgap, sectional view, color distribution through virtual wearing to compare and analyze the differences between patterns. Through this, it was intended to provide basic data necessary for pattern development to companies that manufacture and produce clothing for middle-aged men. As a result of analyzing, J pattern was analyzed as the most suitable body shape pattern for middle-aged men. E pattern was too tight and L pattern and N pattern had too much spaces. However, J patternt was analyzed that correction was necessary in setting center back and center front length. The aging phenomenon in which the back is slightly bent forward and shoulders are also inclined is expected to appear, so it is necessary to adjust the front-to-back length, shoulder angle, and shoulder length. It is considered that after developing the research pattern by modifying J pattern, it is necessary to develop a body shape prototype for middle-aged men through actual clothing experiments on middle-aged men.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.340-340
• /
• 2011

플라즈마 공정에서의 생산률이 플라즈마의 밀도에 비례한다는 많은 연구가 이루어진 후, 초대면적 고밀도 플라즈마 소스의 개발은 플라즈마 소스 개발에서 중요한 부분을 차지하기 시작하였다. 이로 인해, 전자 공명 플라즈마, 유도 결합 플라즈마와 헬리콘 플라즈마 등 새로운 고밀도 플라즈마 개발 연구가 활발히 진행되고 있다. 최근에는 고밀도 플라즈마 개발과 더불어, 대면적 플라즈마 소스의 개발이 플라즈마 공정 기술의 중요한 이슈가 되고 있는데, 이는 450 mm 이상의 반도체, 2 m${\times}$2 m 이상의 8세대 평판 디스플레이와 1 m${\times}$1 m 태양광 전지 생산 공정에서 플라즈마의 기술이 요구되고 있기 때문이다. 대면적 공정영역의 이러한 경향은 균일한 대면적 고밀도 플라즈마 개발을 촉진시켜왔다. 밀도가 낮은 축전 결합 플라즈마를 제외한, 대면적 공정에 적합한 고밀도 플라즈마원으로 유도 결합 플라즈마와 헬리콘 플라즈마를 선택한 후, 병렬연결 시의 특성을 알기 위하여 ICP와 헬리콘의 단일 튜브와 다수 튜브의 플라즈마 내부, 외부 변수를 측정하여 조사하였다. 두 가지 플라즈마 소스의 비교 실험을 위하여, 자기장을 제외한 모든 조건을 동등하게 한 후 실험을 하였다. 단일 헬리콘 실험을 바탕으로, 대면적 실험에 가장 적합한 자기장의 세기, 자석의 위치 및 튜브의 치수를 정한 후, fractal 구조를 위한 16개 다수 방전을 ICP와 헬리콘을 비교하였다. 병렬연결 시, RF 플라즈마에서는 같은 전압을 가져도, 안테나 디자인을 고려하지 않으면 모든 튜브의 방전이 이루어 지지 않았다. 이를 컴퓨터 모의 전사를 통해 확인하고, 가장 최적화된 안테나를 설계하여 실험을 하였다. ICP에서는 모든 튜브가 방전에 성공한 반면, 헬리콘 플라즈마는 ICP에 10배에 달하는 높은 밀도를 냈으나, 오직 4개 튜브만이 켜지고 안정적으로 방전이 이루어 지지 않았다. ICP의 경우, RF 전송선의 디자인을 통해 파워의 균등 분배가 가능하지만, 헬리콘의 경우 자기장을 추가해서 고려해야 되는 것을 확인하였다. 모든 튜브에 비슷한 자기장을 형성하기 위해서는 자석의 크기가 커지는 문제점이 있으나, 매우 낮은 압력에서 방전이 가능하고, 같은 압력에서 ICP에 비해 10배 이상 달하는 장점이 있다. 실험 결과를 바탕으로, ICP와 헬리콘 플라즈마의 다수 방전에 대한 분류를 하였고, 바로 현장에 투입이 가능한 소스로 판단된다.