• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.127-142
• /
• 2000

This study have been carried out to find out the mechnical effect of Multiloop Edgewise Arch Wire(MEAW) making use of the finite element method. The tip back bend of MEAW taken in this analysis is $5^{\circ},\;10{\circ}\;and\;15{\circ}$. In addition, Class II or up & down elastic is applied to find out stress distribution and their values in PDL. A adult male of normal occlusion was selected to create the models of teeth and PDL. And the model of MEAW was also created using commercial finite element code (ANSYS version 5.2). The MEAW is forcibly engaged with a class II or up & down elastic, to determine the initial stress generated in PDL. Comparing the compressive and tensile stress at each reference-planes, following results are obtained. 1. When a MEAW of $5^{\circ},\;10{\circ}\;15{\circ}$ tip back bend was engaged with Class II or up & down elastic, the distribution of compressive, tensile stress in entire PDL is similar in each case. 2. The values of compressive and tensile stress in PDL is higher in $15{\circ}$ tip back bend case than in $10{\circ}\;or\;15{\circ}$ tip back bend case. 3. In the distal PDL of 1st and 2nd molar, compressive stress appears. The compressive area is more wide and its values is higher in PDL of 2nd molar than those in 1st molar. The compressive area and its values become more wide and higher according to the increase of the tip back bend. 4. The values of compressive stress are comparatively smaIIer in PDL of molars than those in premolars. 5. Comparing class II and up & down elastic case, tensile stress values in anterior teeth PDL are smaller md their distribution is more wide in up & down elastic case than class If elastic case. On another hand, there is no difference in distribution and stress values in PDL of posterior teeth between two cases. 6. Comparing the tensile area in PDL of anterior teeth, tensile stress values are maximum in PDL of canine.

• The Journal of the Korean dental association
• /
• v.38 no.10 s.377
• /
• pp.962-968
• /
• 2000

치조골과 백악질이 치근막에 의하여 경계되어지지 않고 직접 접촉된 상태인 골유착치는 치조골성장장애, 불안전 맹출, 대합치의 정출, 인접치와의 불안정한 관계 등 다양한 문제를 야기한다. 골유착치의 진단은 방사선 사진에서 치근막의 소실, 타진시의 독특한 소리, periotest를 이용한 동요도 검사 등 다양한 방법이 사용되나 그 신뢰성은 높지 않은 편이다. 따라서 저자는 통산적인 방법은 견인을 시행한 후 견인여부를 평가하여 골유착 여부를 판단하는 임상적 진단법을 사용하고 있다. 골유착치의 치료는 subluxation & extrusion법, autotransplantation법, corticotomy법, segmental osteotomy법, ostectomy법등 다양한 방법이 제시되고 있다. Subluxation & extrusion법은 적용이 간편한 장점이 있으나 골유착의 재발로 인한 교정치료의 실패가능성이 높은 단점이 있다. 본 증례는 다수치의 부분맹출 및 골유착으로 인한 구치부 개방교합이 주소인 환자로 소구치는 통산적인 교정치료법으로 골유착된 대구치는 subluxation & extrusion법을 적용하여 양호한 치료 결과를 얻을 수 있었다.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.197-204
• /
• 2000

[$K^+$]-selective ion channels were studied in excised inside-out membrane patches from human osteoblast-like cells (G292). Three classes of $K^+$channels were present and could be distinguished on the basis of conductance. Conductances were $270\pm27\;pS,\;113\pm12\;pS,\;48\pm8\;pS$ according to their approximate conductances in symmetrical 140 mM KCl saline at holding potential of -80 mV It was found that the small conductance (48 pS) $K^+$channel activation was dependent on membrane voltage. In current-voltage relationship, small conductance $K^+$channel showed outward rectification, and it was activated by the positive potential inside the membrane. In recordings, single channel currents were activayed by a negative pressure outside the membrane. The membrane pressure increased $P_{open}$ of the $K^+$ channel in a pressure-dependent manner. In the excised-patch clamp recordings, G292 osteoblast-like cells have been shown to contain three types of $K^+$ channels. Only the small conductance (48 pS) $K^+$channel is sensitive to the membrane stretch. These findings suggest that a hyperpolarizing current, mediated in part by this channel, may be associated with early events during the mechanical loading of the osteoblast. In G292 osteoblast-like cells, $K^+$channel is sensitive to membrane tension, and may represent a unique adaptation of the bone cell membrane to mechanical stress.

• Journal of Periodontal and Implant Science
• /
• v.16 no.1
• /
• pp.92.2-92.2
• /
• 1986

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.3
• /
• pp.445-456
• /
• 1992

A two dimensional finite element model was constructed to analyze the mechanical behavior of a five unit fred partial denture(FPD) with a 2nd premolar pier abutement either employing a rigid or nonrigid connector. Gap elements were used to model the clearance space of the nonrigid connector. All FPDs with rigid or nonrigid connectors reduced the magnitude of stress in the periodontium as compared to the control, with both normal or reduced bone support. An FPD with rigid connectors induced the smallst stresses in the periodontium. A FPD with a nonrigid connector on the mesial of the molar abutment exhibited the most undesirable mechanical stress states and deformations.

• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.417-428
• /
• 2004

The purpose of this study was to evaluate the stress distributions at the periodontal ligament (PDL) and displacements of the maxillary first molar when mesially directed force was applied under various molar angulations and rotations. A three dimensional finite element model of the maxiilary first molar and its periodontal ligament was made Upright position, mesially angulated position by $20^{\circ}$ and distally angulated position of the same degree were simulated to investigate the effect of molar angulation. An anteriorly directed force of 200g countertipping moment of 1,800gm-mm (9:1 moment/force ratio) and counterrotation moment of 1,000gm-mm (5:1 moment/force ratio) were applied in each situation. To evaluate the effect of molar rotation on the stress distribution, mesial-in rotation by $20^{\circ}$ and the same amount of distal-in rotation were simulated. The same force and moments were applied in each situation. The results were as follows: In all situations, there was no significant difference in mesially directed tooth displacement Also, any differences in stress distributions could not be found, in other words. there were no different mesial movements. Stress distributions and tooth displacement of the $20^{\circ}$ mesially angulated situation were very similar with those of the $20^{\circ}$ distal-in rotated situation. The same phenomenon was obserned between the $20^{\circ}$ distally angulated situation and $20^{\circ}$ mesial-in rotated situation. When the tooth was mesially angulated, or distal-in rotated, mesially directed force made the tooth rotate in the coronal plane. with its roots moving buccally, and its crown moving lingually. When the tooth was distally angulated, or mesial-in rotated, mesially directed force made the tooth rotate in the coronal plane, with its roots moving lingually and its crown moving buccally. When force is applied to au angulated or rotated molar, the orthodontist should understand that additional torque control is needed to prevent unwanted tooth rotation in the coronal plane.

• The Journal of the Korean dental association
• /
• v.36 no.7 s.350
• /
• pp.497-502
• /
• 1998

• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.15-26
• /
• 2006

흡수성 차페막을 이용한 조직 유도 재생술시 차폐막의 견고성으로 미루어 보아 재생을 위한 공간의 유지가 어려울 수 있다. 조직 유도 재생술과 함께 골이식술을 시행함으로써 공간 확보와 함께 적절한 혈병의 유지를 도모할 수 있고 이식된 골은 선생골 형성을 위한 핵으로 작용할 수도 있다. 최근에 사람의 치아회분말과 연석고를 혼합한 골이식재가 여러 연구를 통해 좋은 골이식재로 평가되었다. 본 연구에서는 성견 하악 소구치 2급 치근이개부위에 외과적으로 형성하여 흡수성 차폐막과 치아회분말-연석고 혼합 이식재를 이용한 조직유도재생 술을 시행하여 치주 조직 재생의 양상을 조직학적으로 관찰하고자 한다. 생후 12개월에서 16개윌 된 체중 15 Kg 내외의 성견 4마리를 이용하였다. 실험 재료로 생체흡수성 차폐막 (Biogide(R), Swiss) 를 사용하였고, 골이식재로 치아회분말-연석고를 혼합매식 하였다. 양측 상악 소구치 부위에 변연 치조골하방에 4 mm ${\times}$ 4 mm ${\times}$ 4 mm, (깊이 ${\times}$ 근원심 ${\times}$ 협설폭경) 깊이로 골내낭을 형성하였다. 형성된 골내낭의 기저부위 치근 표면에 1/4 round bur로 notch를 형성하여 참고점으로 하였다. 무작위로 선택된 한 쪽의 결손부를 대조군으로 오직 생체 흡수성 차폐막을 사용하였고, 실험군으로 치아회분말-연석고와 생체 흡수성 차폐막을 결손부로부터 2 mm 이상 덮을 수 있도록 다듬어 결손부 위에 위치시킨 후 협측 판막을 덮고 봉합하였다. 4주 후 2마리 ,8주 후 2마리를 희생시키고 통상의 방법으로 고정, 탈회, 포매의 과정을 거쳐 광학 현미경으로 검경하였다. 그 결과, 1. 4주 대조군에서 Bio-gide(R)는 완전한 흡수를 보였고, 치근이개부내에는 큰 공간이 존재하였다. 2. 4주 실험군에서 역시 Bio-gide(R)는 완전한 흡수를 보였고, 골 결손부내에 더 많은 신생골 관찰되었다. 그러나 아직까진 기존골과 신생골간에 명확한 차이가 있어서 쉽게 구분할 수 있었다. 또한 골이식재 주변으로 파골세포가 다수 관찰되며 이로 미루어 보아 활발한 골흡수가 일어남을 알 수 있었다. 3. 8주 대조군에서 결손부내에서는 기존골에 인접하여 신생골 형성이 부분적으로 일어났으나 연조직 침입이 관찰되었다. 4. 8주 실험군은 신생골이 기존골과 매우 유사한 형태로 관찰되었고, 신생골 형성 부위에 신생 혈관 증식이 관찰되었다. 또한 골내낭 기저부위에서는 백악질과, 치주인대가 재생됨이 관찰되었다. 이상의 결과에서 치아회분말-연석고 혼합매식은 골재생을 위한 골전도성이 있는 재료로 사료되며, 이를 이용히여 치주조직재생술시 흡수성 차폐막과 병행하여 사용한다면 더 많은 골재생이 있을 것으로 기대된다.

• 대한치주과학회:학술대회논문집
• /
• 2001.12a
• /
• pp.87-88
• /
• 2001

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.391-398
• /
• 1998

The purpose of this study was to find the distribution and measurement of compressive and tensile stress when intrusi- on arch wire is forced engage with upper canine and to analysis stress at each section through FEM. And we compare compressive and tensile ratio at each section. The results were as follows. 1. At FA point and cemento-enamel junction of upper canine, compressive and tensile force ratio is about the same. 2. At apex, compressive force is the four times as tensile force. ; In intrusion, we show root resorption at apex. 3. At Cemento-enamel junction, the compressive and tensile force show the maximun value except FA Point.