• 대한치과교정학회지
• /
• 제38권4호
• /
• pp.265-274
• /
• 2008

3D CT를 이용하여 파노라마에서 얻어진 상악 매복 견치 위치 정보의 유용성을 평가하기 위해, 상악 견치 매복을 주소로 경북대학교병원에 내원한 환자를 대상으로 파노라마 방사선 사진과 3D CT에서의 매복 견치의 위치를 평가하였다. 대상은 25명(남자 7명, 여자 18명)으로 평균 나이는 10.9세(범위 : 8.2 - 15.7세)이며, 35개의 상악 매복 견치증례를 분석하여 다음의 결과를 얻었다. 첫째, 파노라마 방사선 사진은 확대되어 촬영되므로 3D CT의 계측치보다 상악 견치의 tooth length, crown width, vertical distance 그리고 lateral shift값에서 큰 값을 가졌다. 단, angulation to occlusal plane은 파노라마에서 더 작은 값으로 계측되었다. 둘째, 파노라마 방사선 사진상 상악 견치가 구개측으로 매복된 경우, angulation to occlusal plane은 3D CT보다 작게 측정되고 vertical distance는 더 크게 측정되었다. 셋째, 파노라마 방사선 사진에서 상악 매복 견치의 tooth length, crown width 그리고 순측으로 매복된 경우 상악 견치의 angulation to occlusal plane은 3D CT와 근접된 계측치를 가졌다. 또한 CT와 비교하였을 때, 치근 흡수 정도 평가에 대한 파노라마 방사선 사진의 감수성은 33.3%인 것으로 측정되었다. 파노라마 방사선 사진은 협측 매복견치의 위치는 실제와 유사하다고 생각되나 구개측 매복의 경우 3D CT보다 더 높게, 각도는 더 작게 나타나는 등 상당한 차이가 있어 CT를 이용한 추가적인 검사가 필요하다고 생각된다.

• 대한소아치과학회지
• /
• 제32권3호
• /
• pp.531-536
• /
• 2005

저위교합이란 능동적 맹출기 동안이나 이후 해당치아의 교합면 방향으로의 성장이 멈추어 다른 치아들보다 하방에 존재하는 것을 말한다 저위교합치의 결과로 침하치의 만기잔존, 부정교합, 증가된 치아우식 감수성과 치주질환의 가능성, 계승치의 이동 등이 나타날 수 있다. 따라서 조기진단 및 적절한 처치가 필요하다. 저위교합치의 치료는 저위교합 정도나 후속 영구치의 발육정도에 따라 보존에서 발치까지 다양하다. 영구 계승치가 없거나 부분적인 침하치가 치주적으로 건전한 경우, 공간문제를 발생하지 않는 경우 보존적인 접근이 추천되기도 한다. 그러나 계승치가 존재하고 맹출이 지연되는 경우, 국소적인 염증반응과 관련되는 경우, 교정적인 치료가 필요한 경우에는 발거가 필요할 수도 있다. 특히 저위교합된 유구치의 상방으로 인접치가 경사되어 악궁장경에 문제를 초래할 위험이 있는 경우 외과적인 발치가 필요할 수도 있으며 경사가 심한 경우 발치를 위한 외과적 접근이 힘들 수 있다. 심하게 경사된 인접치로 인하여 저위교합치의 외과적 발거가 힘든 환아에서 가철성 교정장치를 이용하여 공간확보를 선행하였으며 보다 용이하게 치아를 발거할 수 있었다.

• 대한소아치과학회지
• /
• 제32권3호
• /
• pp.525-530
• /
• 2005

정중이개란 상악 중절치 사이의 치간이개를 말한다. 이는 혼합 치열기에서 ugly ducking stage에 흔히 관찰할 수 있으며 일반적으로 견치가 맹출하면서 자연적으로 소실되므로 꼭 치료가 필요한 것은 아니다. 그러나 견치 맹출 후에도 정중이개가 2mm이하로 계속 존재하거나 견치 맹출 전이라도 3mm이상의 정중이개가 존재하는 경우에서는 치료의 적응증이 될 수 있다. 특히 후자의 경우 심미적인 면에서 뿐만 아니라, 이로 인해 측절치와 견치의 맹출공간이 부족해지는 문제가 발생하므로 교정치료가 권장된다. 정중이개 치료시 사용되는 장치물은 finger spring 등을 이용한 가철성 장치물과, 교정용 band, tube, bracket 등을 부착시켜 rubber elastics이나 coil spring 등을 사용하는 고정성 장치물로 나뉘어진다. 그러나 정중이개의 치료를 위해 rubber band를 band, tube, bracket 등과 같은 적절한 부가장치 없이 사용하면 rubber band가 치근은 따라 치은 하방으로 이동하게 되고 치주 인대를 파괴하며 치근단 부위에 이르러 치아동요, 치아정출 및 탈락 등 치아에 치명적인 손상을 입힐 수 있다. 본 증례는 정중이개의 치료를 위해 부적절하게 rubber band를 사용하여 외상을 받은 치아를 관찰하여 다소의 지견을 얻었기에 이를 보고하는 바이다.

• 대한치과교정학회지
• /
• 제49권1호
• /
• pp.3-11
• /
• 2019

Objective: The purpose of this study was to investigate the influence of heritability on the craniofacial soft tissue cephalometric characteristics of monozygotic (MZ) twins, dizygotic (DZ) twins, and their siblings (SIB). Methods: The samples comprised Korean adult twins and their siblings (mean age, 39.8 years; MZ group, n = 36 pairs; DZ group, n = 13 pairs of the same gender; and SIB group, n = 26 pairs of the same gender). Thirty cephalometric variables were measured to characterize facial profile, facial height, soft-tissue thickness, and projection of nose and lip. Falconer's method was used to calculate heritability (low heritability, $h^2$ < 0.2; high heritability, $h^2$ > 0.9). After principal components analysis (PCA) was performed to extract the models, we calculated the intraclass correlation coefficient (ICC) value and heritability of each component. Results: The MZ group exhibited higher ICC values for all cephalometric variables than DZ and SIB groups. Among cephalometric variables, the highest ${h^2}_{(MZ-DZ)}$ and ${h^2}_{(MZ-SIB)}$ values were observed for the nasolabial angle (NLA, 1.544 and 2.036), chin angle (1.342 and 1.112), soft tissue chin thickness (2.872 and 1.226), and upper lip thickness ratio (1.592 and 1.026). PCA derived eight components with 84.5% of a cumulative explanation. The components that exhibited higher values of ${h^2}_{(MZ-DZ)}$ and ${h^2}_{(MZ-SIB)}$ were PCA2, which includes facial convexity, NLA, and nose projection (1.026 and 0.972), and PCA7, which includes chin angle and soft tissue chin thickness (2.107 and 1.169). Conclusions: The nose and soft tissue chin were more influenced by genetic factors than other soft tissues.

• 대한치과교정학회지
• /
• 제51권6호
• /
• pp.366-374
• /
• 2021

Objective: This study investigated the impact of a single piezocision in the maxillary alveolar process on the speed of tooth movement. The null hypothesis was that the speed of tooth movement will be equal with and without piezocision. Methods: All maxillary molars on one side were moved against the combined incisors in 10 ten-week-old male Wistar rats. Under general anesthesia, a force of 25 cN was applied on either side using a Sentalloy closed coil spring. After placing the orthodontic appliance, vertical corticision was performed using a piezotome under local anesthesia, 2 mm mesial from the mesial root of the first molar on a randomly selected side; the other side served as the control. At the beginning of the treatment, and 2 and 4 weeks later, skull micro-computed tomography was performed. After image reconstruction, the distance between the mesial root of the first molar and the incisive canal, and the length of the mesial root of the first maxillary molar were measured. Moreover, the root resorption score was determined as described by Lu et al. Results: Significantly higher speed of tooth movement was observed on the corticision side; thus, the null hypothesis was rejected. The loss of root length and root resorption score were significantly more pronounced after piezocision than before. A strong correlation was observed between the speed of tooth movement and root resorption on the surgical side, but the control side only showed a weak correlation. Conclusions: Piezocision accelerates orthodontic tooth movement and causes increased root resorption.

• 대한치과교정학회지
• /
• 제52권1호
• /
• pp.3-19
• /
• 2022

Objective: The purpose of this study was to investigate the accuracy of one-step automated orthodontic diagnosis of skeletodental discrepancies using a convolutional neural network (CNN) and lateral cephalogram images with different qualities from nationwide multi-hospitals. Methods: Among 2,174 lateral cephalograms, 1,993 cephalograms from two hospitals were used for training and internal test sets and 181 cephalograms from eight other hospitals were used for an external test set. They were divided into three classification groups according to anteroposterior skeletal discrepancies (Class I, II, and III), vertical skeletal discrepancies (normodivergent, hypodivergent, and hyperdivergent patterns), and vertical dental discrepancies (normal overbite, deep bite, and open bite) as a gold standard. Pre-trained DenseNet-169 was used as a CNN classifier model. Diagnostic performance was evaluated by receiver operating characteristic (ROC) analysis, t-stochastic neighbor embedding (t-SNE), and gradient-weighted class activation mapping (Grad-CAM). Results: In the ROC analysis, the mean area under the curve and the mean accuracy of all classifications were high with both internal and external test sets (all, > 0.89 and > 0.80). In the t-SNE analysis, our model succeeded in creating good separation between three classification groups. Grad-CAM figures showed differences in the location and size of the focus areas between three classification groups in each diagnosis. Conclusions: Since the accuracy of our model was validated with both internal and external test sets, it shows the possible usefulness of a one-step automated orthodontic diagnosis tool using a CNN model. However, it still needs technical improvement in terms of classifying vertical dental discrepancies.

• 대한치과교정학회지
• /
• 제52권1호
• /
• pp.66-74
• /
• 2022

Objective: To investigate demographic and skeletodental characteristics of one-jaw (1J-OGS) and two-jaw orthognathic surgery (2J-OGS) in patients with skeletal Class III malocclusion. Methods: 750 skeletal Class III patients who underwent OGS at 10 university hospitals in Korea between 2015 and 2019 were investigated; after dividing them into the 1J-OGS (n = 186) and 2J-OGS groups (n = 564), demographic and skeletodental characteristics were statistically analyzed. Results: 2J-OGS was more frequently performed than 1J-OGS (75.2 vs. 24.8%), despite regional differences (capital area vs. provinces, 86.6 vs. 30.7%, p < 0.001). Males outnumbered females, and their mean operation age was older in both groups. Regarding dental patterns, the most frequent maxillary arch length discrepancy (ALD) was crowding in the 1J-OGS group (52.7%, p < 0.001) and spacing in the 2J-OGS group (40.4%, p < 0.001). However, the distribution of skeletal pattern was not significantly different between the two groups (all p > 0.05). The most prevalent skeletal patterns in both groups were hyper-divergent pattern (50.0 and 54.4%, respectively) and left-side chin point deviation (both 49.5%). Maxillary spacing (odds ratio [OR], 3.645; p < 0.001) increased the probability of 2J-OGS, while maxillary crowding (OR, 0.672; p < 0.05) and normo-divergent pattern (OR, 0.615; p < 0.05) decreased the probability of 2J-OGS. Conclusions: In both groups, males outnumbered females, and their mean operation age was older. The most frequent ALD was crowding in the 1J-OGS group, and spacing in the 2J-OGS group, while skeletal characteristics were not significantly different between the two groups.

• 대한치과교정학회지
• /
• 제52권4호
• /
• pp.287-297
• /
• 2022

Objective: To investigate the pattern of accuracy change in artificial intelligence-assisted landmark identification (LI) using a convolutional neural network (CNN) algorithm in serial lateral cephalograms (Lat-cephs) of Class III (C-III) patients who underwent two-jaw orthognathic surgery. Methods: A total of 3,188 Lat-cephs of C-III patients were allocated into the training and validation sets (3,004 Lat-cephs of 751 patients) and test set (184 Lat-cephs of 46 patients; subdivided into the genioplasty and non-genioplasty groups, n = 23 per group) for LI. Each C-III patient in the test set had four Lat-cephs: initial (T0), pre-surgery (T1, presence of orthodontic brackets [OBs]), post-surgery (T2, presence of OBs and surgical plates and screws [S-PS]), and debonding (T3, presence of S-PS and fixed retainers [FR]). After mean errors of 20 landmarks between human gold standard and the CNN model were calculated, statistical analysis was performed. Results: The total mean error was 1.17 mm without significant difference among the four time-points (T0, 1.20 mm; T1, 1.14 mm; T2, 1.18 mm; T3, 1.15 mm). In comparison of two time-points ([T0, T1] vs. [T2, T3]), ANS, A point, and B point showed an increase in error (p < 0.01, 0.05, 0.01, respectively), while Mx6D and Md6D showeda decrease in error (all p < 0.01). No difference in errors existed at B point, Pogonion, Menton, Md1C, and Md1R between the genioplasty and non-genioplasty groups. Conclusions: The CNN model can be used for LI in serial Lat-cephs despite the presence of OB, S-PS, FR, genioplasty, and bone remodeling.

• 대한치과교정학회지
• /
• 제53권2호
• /
• pp.77-88
• /
• 2023

Objective: To develop a method for generating three-dimensional (3D) digital models of the periodontal ligament (PDL) using 3D cone-beam computed tomography (CBCT) reconstruction and to evaluate the accuracy and agreement of the 3D PDL models in the measurement of periodontal bone loss. Methods: CBCT data collected from four patients with skeletal Class III malocclusion prior to periodontal surgery were reconstructed at three voxel sizes (0.2 mm, 0.25 mm, and 0.3 mm), and 3D tooth and alveolar bone models were generated to obtain digital PDL models for the maxillary and mandibular anterior teeth. Linear measurements of the alveolar bone crest obtained during periodontal surgery were compared with the digital measurements for assessment of the accuracy of the digital models. The agreement and reliability of the digital PDL models were analyzed using intra- and interexaminer correlation coefficients and Bland-Altman plots. Results: Digital models of the maxillary and mandibular anterior teeth, PDL, and alveolar bone of the four patients were successfully established. Relative to the intraoperative measurements, linear measurements obtained from the 3D digital models were accurate, and there were no significant differences among different voxel sizes at different sites. High diagnostic coincidence rates were found for the maxillary anterior teeth. The digital models showed high intra- and interexaminer agreement. Conclusions: Digital PDL models generated by 3D CBCT reconstruction can provide accurate and useful information regarding the alveolar crest morphology and facilitate reproducible measurements. This could assist clinicians in the evaluation of periodontal prognosis and establishment of an appropriate orthodontic treatment plan.

• 대한치과교정학회지
• /
• 제53권3호
• /
• pp.150-162
• /
• 2023

Objective: To investigate craniofacial differences in individuals with hypodontia and explore the relationship between craniofacial features and the number of congenitally missing teeth. Methods: A cross-sectional study was conducted among 261 Chinese patients (males, 124; females, 137; age, 7-24 years), divided into four groups (without hypodontia: no teeth missing, mild: one or two missing teeth, moderate: three to five missing teeth, severe: six or more missing teeth) according to the number of congenitally missing teeth. Differences in cephalometric measurements among the groups were analyzed. Further, multivariate linear regression and smooth curve fitting were performed to evaluate the relationship between the number of congenitally missing teeth and the cephalometric measurements. Results: In patients with hypodontia, SNA, NA-AP, FH-NA, ANB, Wits, ANS-Me/N-Me, GoGn-SN, UL-EP, and LL-EP significantly decreased, while Pog-NB, AB-NP, N-ANS, and S-Go/N-Me significantly increased. In multivariate linear regression analysis, SNB, Pog-NB, and S-Go/N-Me were positively related to the number of congenitally missing teeth. In contrast, NA-AP, FH-NA, ANB, Wits, N-Me, ANS-Me, ANS-Me/N-Me, GoGn-SN, SGn-FH (Y-axis), UL-EP, and LL-EP were negatively related, with absolute values of regression coefficients ranging from 0.147 to 0.357. Further, NA-AP, Pog-NB, S-Go/N-Me, and GoGn-SN showed the same tendency in both sexes, whereas UL-EP and LL-EP were different. Conclusions: Compared with controls, patients with hypodontia tend toward a Class III skeletal relationship, reduced lower anterior face height, flatter mandibular plane, and more retrusive lips. The number of congenitally missing teeth had a greater effect on certain characteristics of craniofacial morphology in males than in females.