• Title/Summary/Keyword: 층 높이

Search Result 689, Processing Time 0.034 seconds

초고층 건축 구조설계에 대하여

  • 염완수
    • Proceedings of the Korean Professional Engineer Association Conference
    • /
    • 1994.10a
    • /
    • pp.113-124
    • /
    • 1994
  • 인간은 예로부터 끊임없이 하늘로 높이 솟은 건축적 상징을 추구해 왔다. 이것은 신에 대한 숭상이고 혹은 자연에 대한 도전이다. 20세기에 접어 들어 초고층 건축을 가능케 한 구조적 해결은 곧 인간의 자연에 대한 승리이다. 또한 초고층 건축은 그 국가에 부와 번영의 상징이기도 하다. 인간은 21세기에도 더 하늘 높이 솟는 초고층 건축을 실현키 위해 끊임없이 노력할 것이다. 1931년 미국에 Empire State Building으로부터 시작한 Skyscraper는 그 후 최고 110층(445m) 높이의 Sears Tower가 세워진 후 많은 초고층 건축설계가 계획되고 있다.

  • PDF

Water Treatment Characteristics by Foam Separator According to Operation Parameters (포말분리공정의 운전인자 변화에 따른 수처리 특성)

  • 허현철;김성구
    • Journal of Life Science
    • /
    • v.8 no.5
    • /
    • pp.504-508
    • /
    • 1998
  • A study was conducted to evaluate a protein removal characteristics by foam separation. The foam separator was operated in well-mixed tank which would be considered as a completely mixed condition. The feasibility of foam separation to remove protein from fresh and sea water was investigated. Protein removal characteristics of the foam separator were obtained by batch reactor operations. To find the effect of the operating parameter to protein removal rate, the foam separation was carried with variation of initial protein concentration and foam height. The results indicated that the protein removal efficiency was increased with increasing protein concentration and decreased with increasing foam height. The relationship between protein concentration and protein removal rate was evaluated by linear regression.

  • PDF

Improvement of Drying Performance of Natural Convection Drier Part I : Analysis of Natural Convection Drier (자연대류형 건조기의성능향상을 위한 모형실험 I. 자연대류형 건조기의 분석)

  • 류관희;정도섭;정창주
    • Journal of Biosystems Engineering
    • /
    • v.4 no.2
    • /
    • pp.25-31
    • /
    • 1979
  • 본연구는 건조에 필요한 열과 공기를 열원으로부터의 자연대류만에 의존하는 간역화력건조기의 성능향상을 도모하기 위하여 실시되었으며 옥수수를 대상으로 모형실험을 통하여 분석한 결과는 다음과 같이 요약된다. 1. 건조기 화구의 공기열입구의 크기는 송풍량에 영향을 미치며 공기의 유입속도가 16m/min 이하가 되도록 충분히 만들어야 한다. 2. 곡물층을 통과하는 송풍량은 곡물층의 두께가 클수록 증가하며 송풍량과 곡물층 두께와의 관계는다음식으로 나타났다. $q=CD^{-k}$ 3. 송풍량은 실험범위내에서는 열원으로부터 곡물층의 높이와 가열공기의 온도상승에 따라 각각 직선적으로 증가하였다. 4. 송풍량은 곡물층의 두께, 열원으로부터의 곡물의 높이 및 가열공기의 온도상승에 의하여 옥수수층의 경우 다음과 같이 추정될 수 있다. $ q=0.00265H(\Delta T) D^{-0.76}$ 5. 바람이 송풍량에 미치는 영향은 매우 커서 8km/hr의 풍속을 가진 바람이 유입구측으로부터 볼 때 송풍량은 바람이 없을 때보다 무려 5배나 증가하였다. 6. 건조실의 전후방간의 가열공기의 온도차이는 열원으로부터 곡물층의 높이가 낮을수록 증가하였으며 이 현상은 바람이 불 때 더욱 현저하게 나타났다. 7. 건조기의 벽면을 통한 열손실은 열원으로부터 곡물층의 높이와 가열공기의 온도상승에 따라 각각 직선적으로 증가하였다.

  • PDF

Effect of Lower Bed Height on Collapse Velocity in the Two-Stage Bubbling Fluidized-Bed with a Standpipe for Solid Transport (고체 수송관이 있는 2 단 기포 유동층에서 붕괴 속도에 대한 하단 층 높이의 영향)

  • Khurram, Muhammad Shahzad;Choi, Jeong-Hoo
    • Korean Chemical Engineering Research
    • /
    • v.56 no.6
    • /
    • pp.864-870
    • /
    • 2018
  • The effect of lower bed height on the collapse velocity was investigated for a two-stage bubbling fluidizedbed (0.1 m in diameter, 1.2 m high) connected with a standpipe (0.025 m in diameter) for solid transport. Air was used as fluidizing gas and mixture of coarse (< $1000{\mu}m$ in diameter and $3625kg/m^3$ in apparent density) and fine (< $147{\mu}m$ in diameter and $4079kg/m^3$ in apparent density) particles as solid particles. Mixing ratio of fine particles, height of the lower bed and the distributor of the upper bed were considered as experimental variables. The collapse velocity increased with static height of the lower bed. However, the effect decreased as the mixing ratio of fine particles increased. The effect seemed to be attributed to the increase in height of the dense layer of coarse particles that prevented the gas from flowing into the standpipe, not in pressure drop for the standpipe, as the bed height increased. The collapse velocity decreased a little as the pressure drop of the distributor of the upper bed increased. An improved correlation was proposed for predicting the collapse velocity.

Prediction on heat and mass transfer coefficients in a packed layer of a regenerator with a solar desiccant cooling system (태양열제습냉방시스템 중 재생기의 충진층 내 열물질 전달계수에 관한 예측)

  • Eflita, Yohana;Choi, Kwang-Hwan
    • Journal of the Korean Solar Energy Society
    • /
    • v.30 no.4
    • /
    • pp.36-42
    • /
    • 2010
  • 본 논문은 태양열이용 냉난방시스템 중에서 실제로 액체흡수제를 재생하는 재생탑 내의 충진층에 있어서의 열 및 물질전달의 실험치와 이론적 해석에 의한 결과치와의 비교를 나타내고 있다.특히 물질전달의 극대화를 위하여 충진층 내에서 공기와 흡수제의 접촉면적을 크게 할 필요가 있는데,이를 위해서 본 실험에서는 직경이 3cm인 플라스틱제 충진재를 사용하였으며, 흡수제로는 저농도의 염화리튬 수용액이 사용 되었다. 충진층 내에서의 최적 높이를 예측하기 위하여 해석의 모델인 실험장치를 직접 제작하여 실험을 수행하였고, 이론 해석에 있어서 체적 열전달을 고려한 정상상태를 모델화하여 해석하였다. 이 결과, 충진층 내에서 실험치와 이론적인 계산치가 잘 일치함을 알 수 있었으며, 충진층의 높이가 2m 이상인 경우에는 높이에 따른 재생량의 차이가 없어서 없음을 알 수 있었다.

Seismic Performance Evaluation of Steel Intermediate Moment Frames with Different Heights (다양한 높이를 가진 철골 중간모멘트골조의 내진성능평가)

  • Kim, Dong Hwi;Park, Yu Jin;Han, Sang Whan
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.27 no.4
    • /
    • pp.215-222
    • /
    • 2014
  • The objective of this research is to evaluate the seismic performance of steel intermediate moment frames(IMFs) with different heights. The seimic performance is conducted according to ATC-63. Three-, six, nine- and twelve-story IMFs are designed according to KBC 2009. The connection is modeled to have a drift capacity of 0.02rad, which is required for IMF connections. This study shows that the probability of collapse increases with an increase in the height of the frame. Nine- and twelve-story frames did not satisfy the requirement specified in ATC-63.

Effects of Protrusive Obstacles on Boundary Layer Height in Open Channel (개수로의 장애물 돌출이 흐름 경계층고에 미치는 영향)

  • Yoon, Min Woo;Pack, Sang Deog;Park, Sang Yeun;Shin, Seung Sook
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.464-464
    • /
    • 2017
  • 경사가 급한 산지하천은 대부분 전석이 산재한 자갈하상으로 되어 있다. 전석은 계곡이나 사면에서 발생한 토석류의 일부로 하천에 유입하여 하류로 이송되는 중에 하상에 퇴적된다. 이후 발생하는 홍수에 따라서 거대 전석은 단속적 이동하기 때문에 하천 흐름을 방해하는 돌출장애물로서 기능하는 경우가 많다. 본 연구에서는 개수로 흐름의 장애를 유발하는 돌출물이 경계층 높이에 어떤 영향을 미치는 지를 파악하기 위하여 장애물 돌출높이의 변화가 경계층고에 미치는 영향을 수리실험으로 조사하였다. 본 연구인 경계층분포 실험은 폭 0.6m, 길이 9m인 순환식 유량공급 개수로에서 진행하였으며 실제 경계층 측정 길이는 폭 0.6m, 최대 길이 1.2m, 수심 0.2m이다. 개수로에 돌출장애물을 부착 후 3차원 유속계를 이용하여 유속을 측정하였다. 유속계의 측정간격은 수로 방향, 폭 방향, 수심방향으로 각각 1cm씩 이동하며 유속 u, v, w를 측정하였으며 이때 흐름의 평균유속은 0.51m/s이다. 실험에 사용된 돌출 장애물의 크기는 가로와 세로는 6cm, 길이 6~10cm인 직육면체 콘크리트이다. 포설된 하상재료의 평균입경은 20.5mm의 강자갈이며 포설된 높이는 평균 20.5mm이다. 실험방법은 개수로 바닥에 돌출장애물을 부착 후 그 하류에서 수심, 유량, 유속, 수온을 측정한다. 또한 하상재료를 포설하고 위와 같은 방법으로 실험을 진행 후 결과를 비교, 분석한다. 본 연구는 결과를 정리하면, 동일한 높이의 돌출장애물이 있을 경우 개수로 유속분포는 자갈하상에서 기울기가 더 급하였다. 돌출 장애물에서 하류로 갈수록 무차원 경계층 두께는 감소하는 경향을 보였으나 자갈하상인 경우에는 진동을 나타내고 있어서 하상의 조도가 경계층 안정에 영향을 미치는 것으로 판단된다. 따라서 자갈하상과 같이 하상의 조도고가 클 때 경계층 변화에 미치는 기구를 파악하는 연구가 필요하다.

  • PDF

Air Flow and Heat Storage Performance of Packed Pebble Beds Model (모형 축열층의 공기유동 및 축열 성능)

  • 이석건;이종원;이현우
    • Proceedings of the Korean Society for Bio-Environment Control Conference
    • /
    • 1999.11a
    • /
    • pp.109-113
    • /
    • 1999
  • 겨울철 난방에너지와 여름철 냉방에너지 절감을 위한 자갈축열 태양열 온실의 설계자료를 얻고자 모형 자갈축열층과 이론적 해석을 통하여 축열층의 공기유동성 및 자갈축열층의 축열성능을 분석한 결과를 요약하면 다음과 같다. 1. 압출식으로 공기를 유동시켰을 경우 축열층내 풍속은 0.09-l.50㎧(평균 0.60㎧)범위였으며, 흡인식으로 공기를 유동시켰을 경우 축열층내 풍속은 0.15-0.90㎧(평균 0.46㎧)범위로 평균풍속은 압출식이 높게 나타났으나 축열층 가운데에서는 흠인식이 약 0.06㎧정도 높게 나타났다. 이러한 결과로 볼 때 자갈축열층내 공기순환을 위한 별도의 파이프 매설은 불필요한 것으로 판단된다. 2. 자갈축열층의 공극율이 증가할수록 축열량은 감소하였으며 순환팬 용량과 공극율에 따라 평균 2,133㎉/h-3,243㎉/h 정도 축열량 차이가 있는 것으로 나타났다. 3. 공극율이 0.45인 경우 축열층의 높이가 높을수록 자갈축열층의 온도는 서서히 증가하였으며, 축열층 높이 60cm이하에서는 축열 7시간이후부터는 축열량 변화를 거의 없는 것으로 나타났다. 4. 이러한 결과를 모형축열층에 있어 실험적으로 구해지는 축열 자갈층의 온도 및 축열량과의 비교 검증단계를 거쳐 온실규모에 필요한 적정 축열시스템을 산정할 수 있는 시뮬레이션 프로그램의 기초자료로 활용하고자 한다.

  • PDF

Study on the flame height definition in Forest (낙엽층의 화염높이 산정에 관한 연구)

  • Kim, Dong-Hyun;Tanaka, Takeyoshi;Lee, Myung-Bo;Kim, Kwanl-Il
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2009.04a
    • /
    • pp.365-371
    • /
    • 2009
  • 산불에 있어 화염높이 산정은 복사열전달에 의한 수평 또는 수직적 화염확산을 예측하는데 있어 매우 중요한 부분이다. 화염특성 중 화염높이는 빛을 수반하는 화염(the luminous flame)의 평균높이로 확인할 수 있다. 본 연구에서는 외부 풍속과 경사 등으로 인한 화염 높이가 변화될 수 있는 조건을 제외한 산림 내 지표연소물질인 낙엽층(fuel bed)에 대한 화염높이 관측실험과 Cone calorimeter(ASTM-1354)을 이용하여Heat Release Rate 측정하였고 surface fuel에 대한 화염높이 산출식 $H_f=0.027{\dot{Q}}^{2/3}$을 도출하였다. 실험값과 개발 산정식, 기존 Heskestad(1998) 식과의 적용값 비교 결과, 소나무 낙엽의 경우, 실험값과 개발 산정식 적용값의 표준오차는 0.08, 실험값과 기존 Heskestad(1998)의 표준오차는 0.23으로 개발 산정식의 정확성이 높은 것으로 나타났다. 따라서 앞으로 이 식을 이용하여 복사열전달에 의한 화염확산해석 및 화염의 높이에 따른 수관화 전이해석 등에 활용 가능할 것으로 사료된다.

  • PDF

The Panel Analysis of Youth Employment Expectation (청년층의 취업 눈높이 패널 분석)

  • Kim, Hye Jin;Oh, Ho Young
    • Journal of Labour Economics
    • /
    • v.39 no.3
    • /
    • pp.1-32
    • /
    • 2016
  • The purpose of this article is to examine the change of employment expectation using the wave 7-11 (2010-2014) of Korea Education and Employment Panel(KEEP). The three main variables are the reservation wage, which has been studied by labor economists for a long time, the convenient working environment factor, the desired job factor. Last two of which are extracted from the 15 survey questions about employment expectation using the factor analysis. Our estimates suggest that male have a higher reservation wage than female while female have a higher level of expectation overall. Women attach more importance to working environment especially. Also, university students have a higher reservation wage and set a higher value on the desired job than employees and job seekers.

  • PDF