• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.667-671
• /
• 2003

Tape cast laminar composites with alumina/zircon(reaction-bonded mullite/zirconia) as an inner layer and alumina/zirconia or mullite/zirconia as an outer layer have been fabricated by hot-pressing. The mechanical properties(hardness and Young's modulus) and microstructure of laminar composites were examined using a nanoindentation technique and Scanning Electron Microscopy (SEM), respectively. The indentation load-displacement curve revealed the existence of residual stress in laminar composites.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.2
• /
• pp.45-57
• /
• 1987

The dynamic behavior of a structure by earthquake is considerably affected by the flexibility of the base soil. This phenomenon is called dynamic soil-structure interaction effect. There are two broad categories of soil-structure interaction analytical technique: direct method and substructure method. Substructure method, in contrast to direct method, has many limitations in applying to embedded structures or structures on layered soil sites, while it is relatively simple. In this paper, a simplified soil-structure interaction analytical procedure using substructure method is proposed to eliminate its original limitations. The proposed method is well applicable to embedded structures or structures on layered soil sites with as good results as FLUSH.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.697-702
• /
• 2011

The new layered perovskite manganites $La_{0.5}Sr_{1.5}Mn_{0.5}Cr_{0.5-x}Fe_xO_4$ (x=0.15, 0.3) have been prepared by standard ceramic method. The powder X-ray diffraction studies show that the phases crystallize with tetragonal unit cell in the space group I4/mmm. The electrical transport properties suggest that the phases show insulating behaviour and the electrical conduction in the phases occurs by a 3D variable range hopping mechanism. The magnetic properties suggest that both the phases are antiferromagnetic.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.65-76
• /
• 2012

In this study, probabilistic analysis of seepage through a two-layered soil foundation was performed. The hydraulic conductivity of soil shows significant spatial variations in different layers because of stratification; further, it varies on a smaller scale within each individual layer. Therefore, the deterministic seepage analysis method was extended to develop a probabilistic approach that accounts for the uncertainties and spatial variation of the hydraulic conductivity in a layered soil profile. Two-dimensional random fields were generated on the basis of the Karhunen-Lo$\grave{e}$ve expansion in a manner consistent with a specified marginal distribution function and an autocorrelation function for each layer. A Monte Carlo simulation was then used to determine the statistical response based on the random fields. A series of analyses were performed to verify the application potential of the proposed method and to study the effects of uncertainty due to the spatial heterogeneity on the seepage behavior of two-layered soil foundation beneath water retaining structure. The results showed that the probabilistic framework can be used to efficiently consider the various flow patterns caused by the spatial variability of the hydraulic conductivity in seepage assessment for a layered soil foundation.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.56-63
• /
• 2006

We have synthesized two types of diamine monomers containing various chain length to prepare polyimides with layered structure. By using these diamines, homo-polyimides and co-polyimides having hydrophobic and hydrophilic segment of flexible side chain were synthesized. The segregated layered structures were formed by repulsive force with main chain as the side chains reach a critical length because the rigid main chains are packed into layered structure with the flexible side chains occupying the space between layers. As a result, the gallery space of each homo-polyimide was increased at spacing of $32.7\~48{\AA}\;or\;7\~10.5{\AA}$ as the increased hydrophobic or hydrophilic side chain length through X-ray diffraction. The gallery space of co-polyimides was also showed similar phenomenon by repulsive force of side chains with different properties. We have also confirmed that gallery space and molar volume were significantly depended on length of flexible side chain via molecular modeling.

• Economic and Environmental Geology
• /
• v.50 no.5
• /
• pp.375-387
• /
• 2017

Amphibolite-hosted Fe-Ti mineralization at the Soyeonpyeong Island, located in central western part of the Korean Peninsula is a typical orthomagmatic Fe-Ti oxide deposit in South Korea. The amphibolite intruded into NW-SE trending Precambrian metasedimentary rocks. Lower amphibolite is characterized by igneous layering, consisting of feldspar-dominant and amphibole-Fe-Ti oxide-dominant layers. The igneous layering shows complicated and/or sharp contact. In contrast, upper amphibolite has a more complicated lithofacies (garnet-bearing, coarser, and schistose), and massive Fe-Ti oxide ore alternates with schistose amphibolite. NS- and EW-trending fault systems lead to redistribute upper amphibolite-hosted Fe-Ti orebody and igneous layering of lower amphibolite, respectively. The whole-rock compositions of amphibolite and Fe-Ti oxide ore reflect their constituent minerals. Amphibolite shows significantly positive Eu anomalies whereas Fe-Ti oxide ore has weak negative Eu anomalies. Plagioclase (Andesine to oligoclase) and Fe-Ti oxide minerals have constant composition regardless of their distribution. Amphibole has a compositionally variable but it doesn't reflect the chemical evolution. Mineral compositions within individual layers and successive layers are relatively constant not showing any stratigraphic evolution. This suggests that there are no successive injections of Fe-rich magma or assimilation with Fe-rich country rocks. Contrasting Eu anomalies between amphibolite and Fe-Ti oxide ore also suggest that extensive plagioclase fractionation during early crystallization stage cause increase in $Fe_2O_3/FeO$ ratio and overall Fe contents in the residual magma. Thus, Fe-rich residual liquids may migrate at the upper amphibolite by filter pressing mechanism and then produce sheeted massive Fe-Ti mineralization during late fractional crystallization.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.41-44
• /
• 2004

Hydrophilicity and hydrophobicity of pottery bodies can be controlled via chemical substitution of layered clay with hydrophilic and hydrophobic organics. In this study, organo-clay nanocomposites were prepared by ion-exchange of montmorillonite with dodecylamine and hexadecylamine, respectively. Substitution sites of organics and the interval changes of layered materials are characterized by FT-IR and WAXD and organics amounts loaded and water comtents contained by C/S analysis and TG-DSC. The organics were selectively intercalated so that increase layer interval from 12${\AA}\; to\;16{\AA}$. Organo-modified clay is changed to more hydrophobic comparing to clay itself.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.6
• /
• pp.580-584
• /
• 1999

The synthesis and characterization of intercalated compound of decansulfonate into hydrated nickel is presented. The compound shows a layered structure as determined by high temperature powder X-ray diffraction (HTXRD). The layer distance of the product is increased from 24.7 $\AA$ to 30.5 $\AA$ by increasing the temperature which is in turn accomplished by changing the structure of the intercalated nickel compound. From the X-ray diffraction data and the decanesulfonate size, the orientation of the decanesulfonate onto the nickel layer is determined. The molecular axis of the decanesulfonate with bilayer structure is tilted to the perpendicular of the nickel layer.

• Computational Structural Engineering
• /
• v.5 no.2
• /
• pp.119-127
• /
• 1992

The entire nonlinear behavior of reinforced concrete frames up to collapse, is analyzed by the displacement control method and the combined layered and nonlayered method. All of the rigidities of section are calculated approximately by a sum over all the layers for the layered method, are used the integral values over the cross section area for the nonlayered method. The spurious sensitivity to the chosen element size in the result of analysis by finite element method for the materials with strain-softening can be overcome by modifying the strain distribution based on the concept of fracture energy at plastic hinge considering the applied axial load.

• Computational Structural Engineering
• /
• v.18 no.3 s.69
• /
• pp.7-14
• /
• 2005