• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.747-756
• /
• 2010

This study is on the spatial composition of accommodation area in accommodation barge. The accommodation barge which is used as living facilities for offshore plants' workers can be classified into Accommodation Work Barge, Accommodation Pipe Lay Barge and Multi-purpose Accommodation Barge. We study on the spatial composition of accommodation area in Accommodation Work Barge, most frequently used, through analyzing G.A drawings of the barges. The spatial composition has great influences into the convenience and amenity for workers' daily life in the accommodation area of accommodation barge. The spatial composition of accommodation area shows many characteristics not in horizontal arrangement on any deck but in vertical space arrangement on layers of decks. The particular types of vertical space composition can be classified into 'Centralized Type' and 'Dispersive Type'. These two types will be the basis of space planning for new accommodation barge.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.115-130
• /
• 2009

This study was focused on digital restoration and structural stability evaluation applying 3D scanning system of five-storied Magoksa temple stone pagoda in Gongju. For these, the digital restoration of the pagoda was completed using laser scan data which is measured 16 directions and data processing program of 7 stages. As a result of digital restoration, the overall height and width of stone properties showed a little difference in directions and the width of roof stones appeared very high difference of each floor. The width of pagoda body become smaller to the fifth floor, but gradual decrease rate showed irregular characteristics. Also, as result of 3D image analysis for structural stability evaluation, the displacement occurred toward northwest in second body stone to upper final stone except for central axis of the first body stone which inclines toward southwest. Such 3D image analysis is required quantification of survey method and should be applied to various field such as quantitative damage maps in order to utilize a conservation of stone cultural heritages, continuously.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.7
• /
• pp.91-105
• /
• 2005

In this study, the deformation behavior of Daegok dam during the construction was analyzed based on the measurement data and a comparative analysis with foreign CFRD measurements was performed. From measuring settlements of Daegok dam with depth, overall behavior was evaluated to be consistent with measured data of other CFRD dams. In addition, construction modulus, void ratio and shape factor were also evaluated to be major factors in predicting the settlement behavior during construction of CFRD-typed dam from measured data of 38 CFRD-typed dams, and the maximum internal settlement is proportional to the void ratio. From the relationship between the maximum internal settlement and the height of a dam, 26 dams were assessed to have its relative modulus ranging between 0.001 and 0.01. In case of general CFRD, the average modulus of maximum internal settlement to the height of a dam is estimated to be 0.005. In case of a low void ratio, the construction modulus was high with its shape factor below 4. On the other hand, in case of a high void ratio, the relative settlement rate was high with its shape factor more than 4.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.31-39
• /
• 2021

In this paper, warpage analysis that separates PCB for PoP (Package on Package) into unit and substrate using FEM (Finite Element Method), analysis of the effect of layer thickness on warpage, and SN (Signal-to-Noise) ratio by Taguchi method was carried. According to the analysis result, the contribution of the circuit layer on warpage was very high in the unit PCB, and the contribution of the outer layer was particularly high. On the other hand, the substrate PCB had a high influence of the circuit layer on warpage, but it was relatively low compared to the unit PCB, and the influence of the solder resist was rather increased. Therefore, considering the unit PCB and the substrate PCB at the same time, it is desirable to design the PCB for PoP layer-by-layer structure so that the outer and inner circuit layers are thick, the top solder resist is thin, and the thickness of the bottom solder resist is between 5 ㎛ and 25 ㎛.

• Journal of Korea Multimedia Society
• /
• v.14 no.11
• /
• pp.1438-1449
• /
• 2011

UWSNs(Underwater Wireless Sensor Networks) need effective modeling fitted to the customized type of application and its covering area. In particular it requires an energy efficient data aggregation method for such customized application. In this paper, we envisage the application oriented model for monitoring the pollution or intrusion detection over a given underwater area. The suggested model is based on the honeycomb array of hexagonal prisms. In this model, the purpose of data aggregation is that the head node of each layer(cluster) receives just one event data arrived firstly and transfer this and its position data to the base station effectively in the manner of energy efficiency and simplicity without duplication. Here if we apply the existent data aggregation methods to this kind of application, the result is far from energy efficiency due to the complexity of the data aggregation process based on the shortest path or multicast tree. In this paper we propose three energy efficient and simple data aggregation methods in the domain of cluster and three in the domain of inter-cluster respectively. Based on the comparative performance analysis of the possible combination pairs in the two domains, we derive the best energy efficient data aggregation method for the suggested application.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.33 no.12
• /
• pp.32-38
• /
• 2004

초고층건물의 건설이 증가되고 있지만 건물외파와 출입문의 기밀도가 낮게 유지될 때, 이러한 누설면적과 층별로 구획할 수없는 수직샤프트(계단실 등)와 직렬로 배치될 경우, 필연적으로 발생하게 되는 굴뚝 현상(stack effect)의 발생원인과 차압크기 산정하는 방법 및 예방대책을 소개하고자 한다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.106-110
• /
• 1998

본 논문에서는 먼저 다층흡착에서 각 흡착층의 결합에너지가 서로 다른 경우의 흡착 등온선을 유도한다. 그리고 유도된 흡착등온식이 저압영역에서 헨리의 실험법칙을 잘 만족시킴을 보인다.

• Communications for Statistical Applications and Methods
• /
• v.3 no.1
• /
• pp.131-143
• /
• 1996

다변량 층화임의추출에서 한 변수의 Neyman 최적배분은 다른 변수에 대한 층화분산을 최소화시키지 못하는 결과를 초래할 수도 있다. 따라서 다변량 자료의 경우 '최적'배분 대신에 '절충'배분이 도입되어 왔다. 이 연구에서는 각 변수별 Neyman 최적배분에 근거해서 얻은 층화표본평균벡터의 공분산 행렬에 가장 잘 적합되는 층별로 동일한 크기의 절충배분을 찾고자 한다. 이에 적절한 기준 다섯가지를 제시하고 예를 통해 비교, 분석하였다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.04a
• /
• pp.179-180
• /
• 1998

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.304-307
• /
• 2009

본 논문에서는 3차원 모델링을 이용하여 원공을 갖는 알루미늄 판의 패치 보강효과에 대해 알아보고자 한다. 구조물의 노후화로 인해 높은 응력을 받는 부재의 응력 특이점에서 내구력이 급격하게 저하되거나 때로는 부재의 정적파괴를 유발시키는 원인을 제공한다. 이로 인해 과거에는 손상된 모재에 보강 재료를 연결시키기 위하여 리벳 또는 볼트와 같은 기계적 연결을 통해 보강하였으나 최근에는 접착패치보강 기법이 그 주류를 이루고 있다. 패치 보강시 일면 패치 보강으로 인하여 면외 휨 효과가 발생된다. 판의 두께 방향에 따른 응력집중계수를 별도로 분석하였다. 기존의 3차원 솔리드 요소는 해의 정확성은 뛰어난 반면에 상당한 컴퓨터 시간을 요구하는 단점을 가지고 있다. 이러한 문제를 극복하기 위해서, 본 논문에서는 각 층의 변위장을 2차원 형상함수와 1차원 형상함수의 조합으로 구성하여, 면내거동에 대한 p-세분화와 면외거동에 대한 p-세분화를 분리시키는 방식을 취한다. 또한, 에너지 함수의 적분시 Gauss-Lobatto 적분법을 사용하여 절점의 위치에서의 응력점을 구하는 경우, 외삽과정을 계산하는 단계를 생략하면서도, 해의 정확성 측면에서는 거의 차이가 없기 때문에 좀 더 효율적인 수치적분이 될 수 있다.