• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.699-710
• /
• 2009

If a country has her geoid model, it could be determine accurate orthometric height because the geoid model could provide continuous equi-gravity potential surface. And it is possible to improve the coordinates accuracy of national control points through geodetic network adjustment considering geoidal heights. This study aims to find the best way to develop geoid model in Philippines which have similar topographic conditions as like Malaysia and Indonesia in Eastsouth asia. So, in this study, it is surveyed the general theories of geoid determination and development cases of geoid model in Asia and it is computed that the geoidal heights and gravity anomalies by spherical harmonic analysis using EGM2008, the latest earth geopotential model. The results show that first, the development of gravimetric geoid model based on airborne gravimetry is needed and second, about 200 GPS surveying data at national benchmark is needed. It is concluded that it is the most reasonable way to develop the hybrid geoid model through fitting geometric geoid by GPS/leveling data to gravimetric geoid. Also, it is proposed that four band spherical Fast fourier transformation(FFT) method for evaluation of Stokes integration and remove and restore technique using EGM2008 and SRTM for calculation of gravimetric geoid model and least square collocation algorithm for calculation of hybrid geoid model.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.4
• /
• pp.362-372
• /
• 2000

This study was conducted to obtain the basic information on the production of high yield and qualitied yam in Andong, major yam-producing district, in Kyongbuk province, using three major Yam cultivars, such as Danma, Jangma and Alata (round type). Alata showed the longest tuber width while Jangma showed the longest tube length. Danma showed the highest tube yield at 2,123 kg/10a. Tubes of Alata had higher dry ratio than those of other cultivars, suggesting that Alata could be used as good processing materials. Characteristics of top parts, such as vine length, leaf number, and lateral vine number showed typical sigmoid curves. Tuber characteristics such as length, width and fresh weight of tuber were linearly increased as the growth period was progressed. Relative growth rate (RGR) for new tuber and stem reached the highest value at 86 DAT (days after transplanting). There were similar tendencies among the cultivars in net assimilation rate (NAR). The highest crop growth rate (CGR) was appeared at 156 DAT regardless of cultivars. In the changes of leaf area ratio (LAR), there were significant differences among three cultivars. LAR were decreased at 86, 106 and 136 DAT for Alata, Danma and Jangma, respectively. However, specific leaf weight (SLW) was greatly increased at 176 DAT, and leaf area index (LAI) was decreased at 156 DAT in all cultivars.

• The Korean Journal of Pain
• /
• v.20 no.2
• /
• pp.116-122
• /
• 2007

Background: Lumbar zygapophysial joints are a common source of chronic lower back pain and radiofrequency thermocoagulation (RF) of the medial branches (MB) has been shown to be effective at providing substantial pain relief for chronic low back pain. Therefore, we carried out this study to determine the short term outcomes and prognostic factors of RF on the MB of patients with lumbar facet syndrome. Methods: We performed RF in fourteen patients who showed greater than 80% pain relief up to three times after a diagnostic MB block was conducted using 0.3 ml of 0.5% bupivacaine. Using 10 cm curved electrodes with 10-mm active tip, a 60 second, $80^{\circ}C$ lesion was made after electrical stimulation at 50 Hz for sensory and 2 Hz for motor nerve testing. The degree of pain relief was then assessed after 2 weeks, and again after 3 months using a visual analog scale (VAS) and a four point Likert scale. The outcome was regarded as 'success' if at least a 50% reduction in the VAS was observed. Possible prognostic factors between the two groups were also evaluated Results: The success rate was 71.4% (10/14) after three months of follow-up. However, there were transient complications, such as neuritis like syndrome, in 4 patients. In addition, short symptom duration and low minimal voltage (< 0.4 V) for sensory stimulation were shown to be the relevant prognostic factors for a successful outcome. Conclusions: RF may be an alternative to repeated MB block or intraarticular injection for palliation of lumbar facet syndrome. For better outcomes, early diagnosis and strict patient selection should be coupled with efforts to avoid anatomically incorrect RF.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.1
• /
• pp.39-46
• /
• 2004

In the GIS construction to land and sea in Korea, GIS construction on land was completed mostly for big cities by NGIS(National Geography Information System) business. However, Marine GIS being constructed by the National Oceanographic Research Institute is still constructing geography information and definition of attribute information and real condition. We have done researches to get maximized ripple effect linking GPS and Navigation techniques on GIS. GPS in accuracy is divided into navigation and precise surveying equipments. Now, GPS technology has been developed very much and with low price GPS equipments are being introduced. But costs on the GPS equipments are high yet. Therefore, the GPS equipments for navigation can be substituted by cheap GPS equipments in a car or ship. In this paper, the authors developed algorithm to convert ellipsoid coordinate between WGS84 and Bessel ellipsoid and to analyze map projection between BESSEL ellipsoid and UTM plane coordinate system. And the author developed ship navigation system with cheap GPS equipments using algorithm of ellipsoid conversion and map projection. The authors proposed the necessity on constructing Internet GIS to manage many ships.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.4 no.2
• /
• pp.77-87
• /
• 1986

As for the deformation measurement of structure, there are many controversial points in using the methods by the strain guage, inclinometer, bial guage, and geodetic method because of the difficulty of instrument setting and the problem in the degree of accuracy of the results as well as in the economical aspect. Therefore, to verify the superiority of the Close- Range Photogrammetry method for the structural deformation measurement, the result of load deformation on the model structure, which was made using the Close-Range Photogrammetry method was compard with the results which was made using the methods of dial guage, precision level, and triangulation. In addition to that, to consider the general problem which would happen when C. R. P method was applied to the practical structure. The elements of C. R. P method like camera rotation angle ($\psi$,$\omega$), exposure elevation (Z$_{L}$), and angle of inclined base line ($\theta$) were experimented, and their specificities were reconsidered. As a result, the application of C. R. P method to the general structure is expected to be increased not only in the aspect of accuracy but in the economical aspect.t.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.4
• /
• pp.231-244
• /
• 2015

The accuracy of reference point of VLBI antenna is mandatory to perform collocation of different space geodetic techniques. In this study, we evaluated the optimal methods for the 3D circle fitting to enhance the accuracy of the reference point of VLBI antenna. Two kinds of methodologies for the orthonormal coordinate system with translation of planar observation point and the unitary coordinate transforamation were suggested and their fitting accuracies were evaluated where the orthogonal distance was calculated by residual between observation point and fitting model and the recursive calculation was performed to improve the accuracy of 3D circle fitting. Finally, we found that the methodology for the unitary coordinate transformation is highly appropriate to determine the optimal equation for azimuth-axis and elevation-axis of VLBI antenna. Therefore, the reference point of VLBI antenna with high accuracy can be determined by the intersection of the above two axises (azimuth-axis and elevation-axis). This result is expected to be utilized for a variety of researches for connection between VLBI observation results and the national control point.

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.39-43
• /
• 2004

This study was conducted to determine the optimum planting distance under rain-shielding condition for improving quality and productivity of squash by staking cultivation. The squashes were grown by 3 planting distances, such as 120${\times}$30, 120${\times}$40 and 120${\times}$50 cm during 3 months under non heat condition. The vine length, fresh weight and leaf area were reduced as planting distance was decreased until main branch was pinching. The first female flowering day and first fruit setting nodes were not different among treatments. The first fruit length and second fruit weight were increased in 120${\times}$50 cm planting distance, but the soluble solid contents were not different among treatments. In 120${\times}$30 cm plant distance, total yield was highest (6,510 kg/10a), but marketable yie이 was lowest. When the planting distance was between 120${\times}$40 cm and 120${\times}$50 cm, the marketable rate was similar (over 98%), but marketable yield was highest in 120${\times}$40 cm planting distance (5,012 kg/10a). The results of this study indicated that the optimum planting distance of staking cultivation in squash seemed to be 120${\times}$40cm.

• The Journal of Korean society of community based occupational therapy
• /
• v.11 no.1
• /
• pp.1-10
• /
• 2021

Objective : This study is to know how the internal and external control of the elderly in care facilities affect the relational aggression's perception. Methods : I analyzed the internal and external control and the relational aggression's perception through a survey of the elderly in care facilities. For data collection, 148 of 165 questionnaires, excluding 17 questionnaires with missing questionnaire and middle-level abandonment, were used for the final analysis. Independent variables were the internal and external control, dependent variables were the relational aggression of negative and bullying behaviors, and controlled variables were general sociological characteristics of the elderly. Results : The results were as follows: First, there was a significant difference internal and external control depending on the length of a care facility. Second, there were significant differences in the recognition of relational aggression depending on the level of education, the period of admission, the presence of spouses, and the level of economy. Third, there was a significant difference in comparison of relational aggression perceptions according to internal and external control. Fourth, internal and external control affected the recognition of relational aggression. Conclusion : According to the demographic characteristics, there was a difference in the internal and external control and relational aggression perception of the elderly living in the facilities, and the internal and external control affected the level of relational aggression perception of the elderly in the facilities.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.4
• /
• pp.325-332
• /
• 2022

Determination of VLBI IVP (Very Long Baseline Interferometry Invariant Point) position with high accuracy is required to compute local tie vectors between the space geodetic techniques. In general, reflective targets are attached on VLBI antenna and slant distances, horizontal and vertical angles are measured from the pillars. Then, adjustment computation is performed by using the mathematical model which connects measurements and unknown parameters. This indicates that the accuracy of the estimated solutions is affected by the accuracy of the measurements. One of issues in local tie surveying, however, is that the reflective targets are not in favorable condition, that is, the reflective sheet target cannot be perfectly aligned to the instrument perpendicularly. Deviation from the line of sight of an instrument may cause different type of measurement errors. This inherent limitation may lead to incorrect stochastic modeling for the measurements in adjustment computation procedures. In this study, error characteristics by measurement types and pillars are analyzed, respectively. The analysis on the studentized residuals is performed after adjustment computation. The normality of the residuals is tested and then equal variance test between the measurement types are performed. The results show that there are differences in variance according to the measurement types. Differences in variance between distances and angle measurements are observed when F-test is performed for the measurements from each pillar. Therefore, more detailed stochastic modeling is required for optimal solutions, especially in local tie survey.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.13 no.1
• /
• pp.71-82
• /
• 2011

This study was conducted to investigate the effect of stem node number, pinching time and growth retardants on the growth of Coreopsis spp. and Dianthus spp. Thy day of seedings are not passed period of 4 weeks after seedlings in the Cutting number and the days seedlings of joint experiments of Coreopsis spp. 2 node ranches treatment of Coreopsis spp. are reasonable valuable as ornamental pot product. Pinching time of Coreopsis spp. was more effectiveis on lateral and growth inhibition in the two times pinching treatment. It is observed that plant growth inhibitors was affected the growth of Coreopsis spp. It is observed that B-9 treatment is the effective plants growth and differentiation, especially the 2 times treatment with 4,000 ppm was the most effective. On the other hand, CCC treatment showed significant differences. B-9 treatment of Coreopsis spp was more effectived than the other treatment. Pinching and plant growth inhibitors of Dianthus spp. was not good the growth and plant height. Compared with B-9 4,000 ppm 2 times and control increased leaves extremely. it confirmed that the things are positively affective.