• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.839-840
• /
• 2012

본 논문에서는 3 축 기계장비의 공간오차를 예측하기 위한 사전 단계로 각 축에 대하여 레일형상오차를 측정하였다. 전용 측정지그를 설계/제작하여 이 지그가 이동함에 따라 혼합축차이점법을 이용하여 레일형상오차를 측정하였다. 레일형상오차로부터 테이블 운동오차를 예측하고, 이와 더불어 각 축 사이의 직각도 오차를 측정한 후 이로부터 최종적으로 3 축 장비에 대한 공간오차를 평가할 예정이다. 예측된 공간오차는 실제 레이저를 이용한 공간오차 측정방법을 이용하여 검증할 예정이다.

• Progress in Medical Physics
• /
• v.27 no.2
• /
• pp.79-85
• /
• 2016

The objective of this study is to increase the accuracy of dose transmission in radiation therapy using two types of treatment tables, standard exact couch (Varian 21EX, Varian Medical Systems, Milpitas, CA) and 6D robotic couch (Novalis, BrainLAB A.G., Heimstetten, Germany)). We examined the dose attenuation based on the two types of treatment tables and studied the dose of attenuation using the phase (In/Out) for the standard exact couch. We measured the relative dose according to the incident angle of a penetrative photon beam under a treatment table. The incident angle of the photon beam was from $0^{\circ}$ to $360^{\circ}$ in the increments of $5^{\circ}$. The reference angle was set to $0^{\circ}$. Furthermore, the relative dose of the 6D robotic couch was measured using 6 MV and 15 MV, and that of the standard exact couch was measured at the sliding rail position (In-Out) using 6 MV and 10 MV. In the case of the standard exact couch, the measured relative dose was 16.53% (rails at the "In position," $175^{\circ}$, 6 MV), 12.42% (rails at the "In position," $175^{\circ}$, 10 MV), 13.13% (rails at the "Out position," $175^{\circ}$, 6 MV), and 9.96% (rails at the "Out position," $175^{\circ}$, 10 MV). In the case of the 6D robotic couch, the measured relative dose was 6.82% ($130^{\circ}$, 6 MV) and 4.92% ($130^{\circ}$, 15 MV). The photon energies were surveyed at the same incident angle. The dose attenuation for an energy of 10 MV was 4~5% lower than that for 6 MV. This indicated that the higher photon energy, lesser is the attenuation. The results of this study indicated that the attenuation rate for the 6D robotic couch was confirmed to be 1% larger than that for the standard exact couch at 6 MV and $180^{\circ}$. In the case of the standard exact couch, the dose attenuation was found to change rapidly in accordance with the phase ("In position" and "Out position") of the sliding rail.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.273-280
• /
• 2014

Purpose : To verify the skin dose in Tomotherapy-based radiation treatment according to the change in tumor locations, skin dose was measured by using Gafchromic EBT3 film and compared with the planned doses to find out the gap between them. Materials and Methods : In this study, to measure the skin dose, I'm RT Phantom(IBA Dosimetry, Germany) was utilized. After obtaining the 2.5mm CT images, tumor locations and skin dose measuring points were set by using Pinnacle(ver 9.2, Philips Medical System, USA). The tumor location was decided to be 5mm and 10mm away from surface of the phantom and center. Considering the attenuation of a Tomo-couch, we ensured a symmetric placement between the ceiling and floor directions of the phantom. The measuring point of skin doses was set to have 3mm and 5mm thickness from the surface. Measurement was done 3 times. By employing TomoHD(TomoHD treatment system, Tomotherapy Inc., Madison, Wisconsin, USA), we devised Tomotherapy plans, measured 3 times by inserting Gafchromic EBT3 film into the phantom and compared the measurement with the skin dose treatment plans. Results : The skin doses in the upper part of the phantom, when the tumor was located in the center, were found to be 7.53 cGy and 7.25 cGy in 5mm and 3mm respectively. If placed 5mm away from the skin in the ceiling direction, doses were 18.06 cGy and 16.89 cGy; if 10mm away, 20.37 cGy and 18.27 cGy, respectively. The skin doses in the lower part of the phantom, when the tumor was located in the center, recorded 8.82 cGy and 8.29 cGy in 5mm and 3mm, each; if located 5mm away from the lower part skin, 21.69 cGy and 19.78 cGy were respectively recorded; and if 10mm away, 20.48 cGy and 19.57 cGy were recorded. If the tumor was placed in the center, skin doses were found to increase by 3.2~17.1% whereas if the tumor is 5mm away from the ceiling part, the figure decreased to 2.8~9.0%. To the Tomo-couch direction, skin doses showed an average increase of 11% or over, compared to the planned treatment. Conclusion : This study found gaps between planned skin doses and actual doses in the Tomotherapy treatment planning. Especially to the Tomo-cocuh direction, skin doses were found to be larger than the planned doses. Thus, during the treatment of tumors near the Tomo-couch, doses will need to be more accurately calculated and more efforts to verify skin doses will be required as well.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.389-390
• /
• 2007

배터리 기반 시스템(휴대폰, PDA, 노트북)에서 현재 배터리에 대한 정확한 잔량 표시는 중요하다. 사용자입장에서 언제 배터리를 충전시켜야 하는지 알아야 하기 때문이다. 그런데 지금까지의 배터리 잔량 측정 장치를 보게 되면, 배터리의 전압만을 측정[1]하여 잔량을 표시하는 방식으로서 여기에는 여러 가지 문제점이 있다. 가장 중요한 문제점으로는 순간적인 배터리 전압강하에 따른 실 시간적이고 정확한 보상체계가 갖춰져 있지 않다는 점이다. 물론 하드웨어적으로 Schmitt Trigger라는 회로[2]를 구성하여 이를 방지해 놓고 있기는 하지만 Hysteresis margin[3]을 벗어난 값에 대해서는 보상을 해주지 않는다. 이런 보상은 보통 소프트웨어적으로 각 이밴트별 룩업 테이블을 만들어서 compensation하고 있기는 하지만, 수많은 이벤트에 대한 보상 값들과 예상치 못한 동작상의 오류를 막을 수는 없다. 따라서 이에 대한 근본적인 대안으로서 본 논문에서는 load current를 측정하여 그에 따른 전압강하를 계산하고 실시간적으로 배터리 전압에 보상을 해줌으로서 보다 정확한 배터리 잔량 표시를 구현하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.10
• /
• pp.928-936
• /
• 2013

3D crosstalk is one of the disturbing things to recognize 3D images. This is caused by the phenomenon that input image for left eye is transferred at the right eye and right eye is transferred at the left eye because of the imperfect isolation by the device characteristics. In this paper, we review the 3D PDP (Plasma Display Panel) operation using active shutter glasses and crosstalk measurement method and investigate the major cause of 3D crosstalk and extend conventional 3D crosstalk using full white and full black image input to Gray-to-Gray (GtoG) 3D crosstalk. We suggest a specific method to reduce Gray-to-Gray 3D crosstalk by using Look up Table (LUT) and sub-field mapping in PDP. And then, we verify the method by measuring GtoG 3D crosstalk rate through specific test images and numerical results.

• Journal of radiological science and technology
• /
• v.42 no.6
• /
• pp.435-440
• /
• 2019

This is to study the accuracy of the actual size according to the TOD(table object distance; TOD) change when measuring blood vessels using angiography equipment, and to help the optimal selection of the device used accordingly. Balls similar to the size of common vessels were calibrated with TOD using 30 mm, 20 mm, 10 mm, 5 mm and acrylic phantoms, catheter calibration from 0 cm to 10 cm, 20 cm and 30 cm, respectively. It was measured whether there was a change in the measured value according to the change. The equipment used was GE Innova 3131 IQ equipment, and the image reconstruction method was GE AW4.7 post processing program. Two radiotechnologists were scanned three times by catheter calibration method and 3DRA(3dimension rotational angiography; 3DRA) volume rendering method. The independent sample T-test showed 0.981 (p> 0.05) to verify the significance between the two observers. As a result, in case of catheter calibration, the error rate at TOD 0 mm and 10 mm is within ± 10%, but when the TOD is changed to 20 mm and 50 mm respectively, the tolerance is ± 10% except for 30 mm ball exceeded. On the other hand, 3DRA was included within the tolerance range of ± 10% overall even when the TOD was changed from 0 mm to 50 mm. In the catheter calibration method, the larger the TOD, the larger the error range, and the 3DRA method was able to measure vascular vessels accurately close to the actual measurement without any consideration of the TOD.

• The KIPS Transactions:PartC
• /
• v.16C no.4
• /
• pp.449-460
• /
• 2009

The signature hashing algorithm[9] provides the fast pattern matching speed for network IPS(Intrusion Prevention System) using the hash table. It selects 2 bytes from all signature rules and links to the hash table by the hash value. It has an advantage of performance improvement because it reduces the number of inspecting rules in the pattern matching. However it has a disadvantage of performance drop if the number of rules with the same hash value increases when the number of rules are large and the corelation among rules is strong. In this paper, we propose a method to make all rules distributed evenly to the hash table independent of the number of rules and corelation among rules for overcoming the disadvantage of the signature hashing algorithm. In the proposed method, it checks whether or not there is an already assigned rule linked to the same hash value before a new rule is linked to a hash value in the hash table. If there is no assigned rule, the new rule is linked to the hash value. Otherwise, the proposed method recalculate a hash value to put it in other position. We implemented the proposed method in a PC with a Linux module and performed experiments using Iperf as a network performance measurement tool. The signature hashing method shows performance drop if the number of rules with the same hash value increases when the number of rules are large and the corelation among rules is strong, but the proposed method shows no performance drop independent of the number of rules and corelation among rules.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.11
• /
• pp.2835-2844
• /
• 1998

Most data parallel languages provide the block-cyclic distribution (cyclic(k)) that is one of the most general regular distributions. In order to generate local addresses for an array section A(l:h:s) with block-cyclic distribution, efficient compiling methods or run-time methods are required. In this paper, two local address generation methods for the block-cyclic distribution are presented. One is a simple scan method that is modified from the virtual-block scheme. The other is a linear-time ${\Delta}M$ table that contains the local memory access information construction method. This method is simpler than other algorithms for generating a ${\Delta}M$ table. Experimental results show that a simple that a simple scan method has poor performance but a linear-time ${\Delta}M$ table generation method is faster than other algorithms in ${\Delta}M$ table generation time and access time for 10,000 array elements.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.693-701
• /
• 2020

In this paper, SQL statements are analyzed to improve database performance in the current course registration system. The performance of the current database was measured through the execution plan of the SQL statements used in the transactions related to the course registration. Through the SQL analysis, the complemented SQL statements confirmed the improved performance. Overall, the performance of the course registration database system was improved through the analysis of the execution plan, and some improvement methods of the course registration SQL were shown as test results. The improved method is to reorganize the tables and index tables related to the course registration through database tuning, and utilize the SQL function to implement an optimized system that has evolved into a course database system with improved performance. The enrollment system re-adjusted by the proposed method showed excellent results in terms of performance compared to the previous enrollment system, and the integrated performance test result reduced the response time by 1.8 to 18 times.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.184-184
• /
• 2004

볼 나사는 반도체ㆍLCDㆍPDP 등 전자제품 조립장비 제조업체와 CNC 공작기계, 정밀측정기계, 직교좌표로봇, 반송장치, 항공기용 유압구동장치 대체품, 전동공구, 파워 steering, 테이블 개폐장치 등에서 구동 장치 및 물품의 이송을 위해 대부분 사용되는 중요한 기계요소 중의 하나이다. 그것은 회전운동을 직선운동으로 전환해주는 기구부에 들어가는 가장 중요한 부품이며, 원통형의 봉에 나선형의 그루브를 가공한 장축의 나사와 단축의 너트 사이에 볼을 게재시켜 축의 회전 시 적은 구름마찰로 인해, 너트부가 직선 운동하는데 원활 하게 만들어진 기계요소이다.(중략)