• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.33-42
• /
• 2013

This paper presents a multihop range-free localization algorithm to estimate the physical location of a normal node with local connectivity information in anisotropic sensor networks. In the proposed algorithm, a normal node captures the detour degree of the shortest path connecting an anchor pair and itself by comparing the measured hop count and the expected hop count, and the node estimates the distances to the anchors based on the detour degree. The normal node repeats this procedure with all anchor combinations and pinpoints its location using the obtained distance estimates. The proposed algorithm requires fewer anchors and less communication overhead compared to existing range-free algorithms. We showed the superiority of the proposed algorithm over existing range-free algorithms through MATLA simulations.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.329-342
• /
• 2003

Most of the existing multicast routing protocols for ad-hoc networks do not take into account the efficiency of the protocol for the cases when there are large number of sources in the multicast group, resulting in either large overhead or poor data delivery ratio when the number of sources is large. In this paper, we propose a multicast routing protocol for ad-hoc networks, which particularly considers the scalability of the protocol in terms of the number of sources in the multicast groups. The proposed protocol designates a set of sources as the core sources. Each core source is a root of each tree that reaches all the destinations of the multicast group. The union of these trees constitutes the data delivery mesh, and each of the non-core sources finds the nearest core source in order to delegate its data delivery. For the efficient operation of the proposed protocol, it is important to have an appropriate number of core sources. Having too many of the core sources incurs excessive control and data packet overhead, whereas having too little of them results in a vulnerable and overloaded data delivery mesh. The data delivery mesh is optimally reconfigured through the periodic control message flooding from the core sources, whereas the connectivity of the mesh is maintained by a persistent local mesh recovery mechanism. The simulation results show that the proposed protocol achieves an efficient multicast communication with high data delivery ratio and low communication overhead compared with the other existing multicast routing protocols when there are multiple sources in the multicast group.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.6
• /
• pp.93-100
• /
• 2014

The objective of this study is to propose the measurement system implementation method for the evaluation and measurement of the indoor-impulsive over 170 dB noise source. For the purpose of measuring impulse noise, design and implementation constructed followed subsystems of the testing center, microphone, ear simulator, head and torso simulator and so on. Measurement systems for the accuracy and reliability of impulse noise are implemented when measuring 3 ways of measurements method by the simultaneous measurement system design. For the accuracy and reliability of three mutually indoor-impulse noise measurements were compared, three kinds of measuring methods in accordance with the peak sound pressure level and octave band. Comparing the results of data, the indoor-impulse noise by analyzing a frequency characteristic was validated in difference for the statistical significance. Result are determined by the influence of the reflected wave. Therefore, the flexible size of the interior test site while interior impulse noise measurement system was constructed. Throughout this system can be affected by parameters that are the impulse noise source and the corresponding frequency-characteristic analysis to determine the spectrum of the reflected wave. And, in the near future, indoor impulse noise measurement systems for acquisition and analysis are utilized in useful data.

• Journal of Advanced Navigation Technology
• /
• v.14 no.3
• /
• pp.452-458
• /
• 2010

In case of an embedded system with computing resource restrictions such as system power and cpu, the overhead due to displaying data on the computer screen may have a significant influence on the system performance. This paper describes an initialization method for LCD-driving components such as an ARM Core, an LCD controller, and an SPI(serial peripheral interface). It also introduces a pixel display function and a panel display method using virtual screen for reducing the display overhead for an LN2440SBC system with an ARM9-based S3C2440A microprocessor. A virtual screen is a large space of computer memories allocated much larger than those needed for one-time display of an image. Displaying a specific region of a virtual screen is done by assigning it as a view-port region. Such a display is useful in an embedded system when concurrently running tasks produce and display their respective results on the screen; it is especially so when the execution result of each task is partially modified, instead of being totally modified, on its turn and displayed. If the tasks running on such a system divide and make efficient use of the region of the virtual screen, the display overhead can be minimized. For the performance comparison with and without using the virtual screen, two different images are displayed in turn and the amount of time consumed for their display is measured. The result shows that the display time of the former is about 5 times faster than that of the latter.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.287-299
• /
• 2008

HTTP is one of the most widely used protocols of the WWW. Currently it uses TCP as the transport layer protocol to provide reliability. The HTTP uses separate TCP connection for each file request and adds unnecessary head-of-line blocking overhead for the file retrieval. The web application is short sized and affected by the increased handover latency of TCP in wireless environment. SCTP has attractive features such as multi-streaming and multi-homing. SCTP's multi-streaming and multi-homing avoid head-of-line blocking problem of TCP and reduce handover latency of TCP in wired and wireless environment. Mean response time is the important measure in most web application. In this paper, we present the comparison of mean response time between HTTP over SCTP with that of HTTP over TCP in wired and wireless environments using NS-2 simulator. We measured mean response time for varying packet loss rate, bandwidth, RTT, and the number of web objects in wired environment and mean response time and packet loss rate for varying moving speed and region size in wireless environment. Our experimental result shows that SCTP reduces the mean response time of TCP based web traffic.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.6
• /
• pp.607-614
• /
• 2013

Nowadays, automotive manufacturers have developed various technologies to improve fuel economy and reduce harmful emissions. The ultra-lean direct injection engine is a promising technology because it has the advantage of improving thermal efficiency through the deliberate control of fuel and ignition. This study aims to investigate the development of a spray-guided-type lean-burn LPG direct injection engine through the redesign of the combustion system. This engine uses a central-injection-type cylinder head in which the injector is installed adjacent to the spark plug. Fuel consumption and combustion stability were estimated depending on the ignition timing and injection timing at various air-fuel ratios. The optimal injection timing and ignition timing were based on the best fuel consumption and combustion stability.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.335-353
• /
• 2017

This paper presents the application technique on thrust jacking pressuring of shield TBM in the sharp curved tunnel alignment by model tests. Recently, the application of shield TBM method as mechanized tunnelling is increasing to prevent the vibration and noise problems, which can be occurred in the NATM in the urban area in Korea. However, it is necessary to plan the sharp curved tunnel alignment in order to avoid the building foundation and underground structures, to develop the shield TBM operation technique in the shape curved tunnel alignment. Therefore, the main operation parameters of shield TBM in the curved tunnel alignment are reviewed and analyzed based on the case study and analytical study. The results show that the operation of shield jacking force system is the most important technique in the shape curved tunnel alignment. The simplified scaled model tests are also carried out in order to examine the ground-shield TBM head behaviour. The earth pressures acting on the head of shield TBM are investigated according to two different shield jacking force systems (uniform and un-uniform pressure) and several articulation angles. The results obtained from the model tests are analysed. These results will be very useful to understand the shield TBM head interaction behaviour due to the shield jacking operation technique in the shape curved tunnel alignment, and to develop the operation technique.

• Journal of the Korea Convergence Society
• /
• v.11 no.9
• /
• pp.277-285
• /
• 2020

The purpose of this study was to evaluate the effects of wearing Head-Mounted Display (HMD) on the cervical range of motion (CROM), neck muscle thickness, and pain in healthy young adults. The HMD group(male=16, female=7) was asked to perform sitting comfortably in a backless chair with hands on their knees with the HMD was worn on their heads to watch the video for 30 minutes. The control group(male=15, female=8) was asked to sit in the same posture as the HMD group for 30 minutes. CROM, neck muscle thickness, and pressure pain threshold (PPT) of both the upper trapezius and levator scapulae were measured before and after intervention. CROM and PPT of the upper trapezius and levator scapulae in the HMD group were significantly decreased and the thickness of the muscles in the HMD group were significantly increased more than in the pre-test (p<.05). There was no significant difference in CROM, muscle thickness, and PPT in the control group. Wearing HMD for a long time can cause a decrease in CROM and PPT and an increase in muscle thickness, and there is a risk of developing musculoskeletal disorders in the neck and shoulder. Therefore, this study recommends maintaining the correct posture of the neck and shoulder and using HMD only for an appropriate time.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.6
• /
• pp.145-154
• /
• 2018

A loosely coupled message broker system is a popular method for integrating distributed software components. Especially, a distributed broker structure with multiple brokers with active-standby or active-active message replicas are used to enhance availability as well as message processing performance. However, there are problems in both active-standby and active-active replica structure. The active-standby has relatively low processing performance and The active-active structure requires a high synchronization overhead. In this paper, we propose an active-active structure of replicas to increase the availability of the brokers without compromising its high fault-tolerancy. In the proposed structure, standby replicas process the requests of the active replicas so that load balancing is achieved without additional brokers, while the distributed coordinators are used for the synchronization process to decrease the overhead. We formulated the overhead incurred when synchronizing messages among replicas, and the formulation was used to support the experiment results. From the experiment, we observed that replicas of the active-active structure show better performance than the active stand-by structure with increasing number of users.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.7-8
• /
• 2017

최근 ARM 프로세서의 가상화 확장 기술을 이용하는 임베디드 시스템에서 다종의 OS 작동을 지원하는 하이퍼바이저가 많이 개발되었다. 가상화 기술은 하드웨어 자원을 효과적으로 사용한다는 이점이 있지만, RTOS를 작동시킬 경우 하이퍼바이저의 오버헤드에 의해 RTOS의 성능이 저하될 수 있는 문제가 발생한다. 본 논문에서는 가상화 기술을 지원하는 ARMv7 Cortex-A15 프로세서를 탑재한 NVidia Jetson TK-1 임베디드 보드에서 RTOS가 단독으로 작동했을 때의 성능과 QPlus Hypervisor를 통해 Linux OS와 함께 RTOS가 작동했을 때의 성능을 측정하고 비교 분석 하였다.