• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.2
• /
• pp.31-34
• /
• 2018

In this study, the feasibility of ZnO/Al/ZnO flexible transparent electrodes for future flexible optoelectronic devices was investigated. All depositions were performed on PET substrates. The thicknesses of the top and bottom ZnO layers were 5-70 nm and 2.5-20 nm, respectively. The highest visible light transmittance was recorded when the thicknesses of the top and bottom ZnO layers 30 nm and 2.5 nm, respectively. 62% optical transmittance (at the wavelength of 400 nm) and sheet resistance of $19{\Omega}/{\Box}$ were measured. After repetitive bending test at a curvature radius of 5 mm, the transmittance and sheet resistance did not change.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.389-397
• /
• 2007

This paper proposes miniaturized broadband parasitic patch antenna. The proposed antenna consists of a probe fed reduced size main patch and U-shaped parasitic patches. The parasitic patches are incorporated to the radiating edges of the main patch to miniaturize the antenna size. The broadband impedance matching can be achieved by either E-plane or H-plane electromagnetic coupling between main patch and parasitic elements. The size of radiating elements is $18{\times}17.6\;mm^2$ and the overall dimension of designed antenna with substrate and ground plane is $25{\times}30{\times}4\;mm^3$. The fabricated antenna on a FR4 substrate shows two resonant frequencies(5.12 GHz and 6.08 GHz) with 27.3 %(1.5 GHz) fractional bandwidth at 5.5 GHz center frequency. The calculated and measured radiation patterns are almost similar to conventional patch antenna.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.772-779
• /
• 2015

In this paper,a reconfigurable multi-band mobile antenna with switching line for LTE band 13, GSM, K-PCS, WCDMA band. The proposed antenna is planar strip line design and composed of stub shorted to the ground plane and two switching line for proposed band operation. To obtain the optimized parameters, we used the simulator, Using the obtained parameters is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -6 dB impedance bandwidth requirement while simultaneously covering when the state of sw1 and sw2 on for LTE band 13, the state of sw1 off and sw2 on for GSM, K-PCS, the state of sw1 off and sw2 off for WCDMA. Respectively and characteristics of gain and radiation patterns are determined for a reconfigurable multi-band mobile terminal.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.6
• /
• pp.18-26
• /
• 2010

Outdoor lighting has become a necessary essential part of society for safety and comfortable space. However, inappropriate outdoor lighting leads to energy waste and poor landscape. Outdoor lighting is a very important social element, which enables us to conduct various activities at night in a safe, efficient and comfort way. River Thames in UK, Venice in Italy and Sydney in Australia is a good example of the coastal area. This paper aims to evaluate the light pollution of outdoor lighting in coastal area in Busan city. The Radiant Imaging ProMetric-1400 was used to measure the luminance of Gwangalli Beach, Marine City and Haeundae Beach. Compare to the CIE recommendation level the luminance of the all outdoor lighting were about 2~20 times higher. Outdoor lighting of the building facade luminance level and color should be particularly limited.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.767-772
• /
• 2006

The receiver of this paper is Dual-band monopulse type for prototype of tracking radar. Localization of radar technology is an issue of SamsungThales and go into development. Dual-band radar in comparison with Single-band radar requires higher cost and power consumption but there are many advantages of dealing with jamming, detection range, image signal rejection, cloud-rain influence, clutter, resolution. The receiver is comprised of X-band RF head module, Ka-band RF head module and common IF module. Each signal of X-band and Ka-band is selected by the switch in If module. Phase shifter in IF module of local stage controls the phase of sum, azimuth, elevation channel. In the test result, gain is $40{\pm}3 dB$, isolation of transmitter/receiver is 39 dBc, dynamic range is 110 dB and noise figure of each channel is 4.5dB and 6.9dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.9
• /
• pp.814-820
• /
• 2015

In this paper, A high selective dual-band bandpass filter was proposed using a dual-mode ring resonator with two short-circuited stubs. For dual-mode resonance, the ring resonator is directly connected with non-orthogonal feed-lines via coupling capacitors. Two short-circuited stubs which are unequal lengths are simultaneously placed at two corners along the two symmetry plane of the ring resonator in order to obtain dual-band responses. Because the feeding angle perturbated ring resonator of the proposed dual-band bandpass filter has the symmetrical structure, Even/Odd mode analysis can be well applied to extract the scattering parameters and transmission zero frequencies. The proposed dual-band bandpass filter was designed and fabricated for WLAN(Wireless Local Area Network) application of IEEE 802.11n standard. The measured results showed a good agreement with the simulation results, and it should be well applied not only for WLAN applications but also for any other communication systems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.2
• /
• pp.145-150
• /
• 2016

The capability of accurate positioning and tracking is necessary to implement an unmanned autonomous driving system. The moving-baseline GPS Technique is a promising candidate to mitigate positioning errors of conventional GPS system. It provides accurate positioning data based on the phase difference between received signals from multiple GPS antennas mounted on the same platform. In this paper, we propose a dual-band dual-circularly-polarized antenna suitable for the moving-baseline GPS. The proposed antenna operates at GPS L1 and L2 bands, and fed by the side of the antenna instead of the bottom. The antenna is firstly designed by calculating theoretical values of key parameters, and then optimized by means of 3D full-wave simulation software. Simulation and measurement results show that the optimized antenna offers 6.1% and 3.7% bandwidth at L1 and L2, respectively, with axial ratio bandwidth of more than 1%. The size of the antenna is $73mm{\times}73mm{\times}6.4mm$, which is small and low-profile.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.1
• /
• pp.63-71
• /
• 1983

A dye-edge tracking algorithm was used to determine the corresponding points in the two images(anterior-posterior and lateral) of the digital subtraction biplane angiography. This correspondence was used to reconstruct three dimensional images of cerebral artery in a dog experiment. The method was tested by comparing the measured image of oblique view with the computed reconstructed image. For the present study, we have developed three new algorithms. The first algorithm is to determine the corresponding dye-edge points using the fact the dye density at the moving edge avows the same changing pattern in the two projection views. This moving pattern of dye-edge density is computed using a matching method of cross-correlation for the two sequential frames' dye density. The second algorithm is for simplified perspective transformation, and the third one is to identify the specific corresponding points on the small vessels. The present method can be applied to compute the blood velocity using the dye-edge displacement and the three- dimensional distance data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.528-537
• /
• 2011

In this paper, a broadband antenna of the CPW structure with a band-notched characteristic is presented. To obtain this characteristic, the complementary split ring resonator(CSRR) is inserted in the ground plane. In addition, the IEEE 802.11a WLAN band(5.15～5.825 GHz) appears in the band-notched characteristic. The proposed antenna dimension is $36{\times}60{\times}1.6\;mm^3$, and it is designed on the FR-4 substrate having a relative dielectric constant of 4.4. The designed antenna shows that the resonant frequency is 2.03～10.78 GHz below the return loss of -10 dB and a VSWR less than 2 was satisfied. As a result, the proposed CSRR has a band-notched characteristic in the range of 4.917～6.017 GHz which the center frequency is about 5.4 GHz band.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.41-41
• /
• 2018

안정적이고 효율적인 전력 공급을 위해 번화가 대로변 주변에 다수의 지상 변압기 및 개폐기가 설치되고 있으며, 이로 인해 불법 부착물로 인한 도시의 미관 훼손, 변압기 및 개폐기의 오염 등의 문제가 발생하고 있다. 따라서 각 산업체 및 연구 기관에서는 부착 방지용 코팅 도료 및 시트에 대해 다양한 연구개발을 진행하고 있으며, 현장에 적용되고 있는 사례도 있다. 하지만 현재 현장에 적용된 대부분의 제품들은 약 1년 정도의 시간이 지나면 고유의 기능을 상실하며, 도료 및 시트와 기판 사이의 박리가 일어나 우수한 성능을 보이지 않아, 결과적으로 도시에 더욱더 악영향을 주고 있다. 이러한 원인으로는 도료 및 시트의 성능 평가를 위한 다양한 규격들이 존재하지만, 테이프류 탈착 시 영향을 주는 인자(Factor)들이 명확하게 설정되어 있지 않고, 이에 대해 면밀하게 분석한 자료가 없으며, 정량적이고 객관적인 시험 방법이 고려되지 않고 있기 때문에 좋은 제품을 선별하기 어려운 상황이다. 따라서 여러 가지 제품들의 비교평가 및 기술 개발에 활용할 수 있는 가이드라인을 제시하기 위해 일반적으로 사용되고 있는 면테이프(Duct tape)를 이용하여 기판(Substrate)에 대해 다양한 인자를 기준으로 탈착 특성을 측정 및 평가하였다. 현재 지상 배전함 및 개폐기는 분체도장(Powder coating)으로 구성되어져 있으며, 그 모재는 탄소강(Carbon steel)으로 이루어져 있고, 소수의 경우 스테인리스(Stainless steel)를 사용하기 있기 때문에 분체도장(Powder coating), 탄소강(Carbon steel), 스테인리스(Stainless steel)를 기판으로 선정하여 탈착 특성을 평가했다. 탈착 특성에 관여하는 요인으로는 탈착 각도(Peeling angle), 탈착 속도(Peeling speed), 표면 조도(Surface roughness) 등이 있고, 상대 습도(Relative humidity)의 경우 탈착 특성에 영향을 거의 주지 않는 것을 확인했다. 탈착 시 각도가 클수록, 속도가 빠를수록, 조도가 작을수록 부착력(Peel resistance, N/cm)과 탈착 에너지(Energy, J)가 커지며, 탈착 특성에 영향을 주는 인자를 바탕으로 95% 신뢰도 구간을 적용한 탈착특성 모델링을 제시하였다. 이 모델링을 이용하여 실제 현장에서 발생할 수 있는 다양한 각도($90^{\circ}$, $180^{\circ}$)와 속도 범위(100 ~ 1500mm/min)에서의 탈착 특성을 추정하는 것으로, 좋은 성능 및 내구성을 가진 제품을 효과적으로 선별한다.