• Journal of The Korean Association For Science Education
• /
• v.42 no.3
• /
• pp.371-381
• /
• 2022

This study causally investigates whether high school student with high science learning motivation becomes to achieve more or vice versa, and also how those two factors affect STEM career motivation. Research participants were 1st year students in a high school at Seoul. We surveyed their science learning motivation three times in the same time interval in the fall semester of 2021, and once a STEM career motivation in the third period. We collected data from 171 students with their mid-term and final exam scores, with which, we constructed and fitted an autoregressive cross-lagged model. The research model shows high measurement stability and fit indices. All the autoregressive and cross-lagged paths were statistically significant. However, standardized regression coefficients were larger in path from motivation to achievement compared to the opposite. Only science learning motivation shows significant direct effect on STEM career motivation, rather than achievement. For indirect effects, the first science learning motivation affected the final exam score and STEM career motivation, and the final exam score affected STEM career motivation. However, the final exam score did not have a total effect toward STEM career motivation. The result of this study shows reciprocal and cyclic causality between science learning motivation and achievement - in comparison, the effect of motivation for the opposite is larger than that of achievement. Also the result of this study strongly reaffirms the importance of science learning motivation. Instructional implications for strengthening science learning motivation throughout a semester was discussed, and a study for the longitudinal effect of science learning motivation and achievement in high school student toward future STEM vocational life was suggested.

• Clean Technology
• /
• v.29 no.1
• /
• pp.31-38
• /
• 2023

Due to water shortages caused by water pollution and climate change, total organic carbon (TOC) standards have been implemented for wastewater discharged from public sewage treatment facilities. Furthermore, there is a growing interest and body of research pertaining to the reuse of sewage treatment water as a secure alternative water resource. The membrane bio-reactor (MBR) method is commonly used for advanced wastewater treatment because it can remove organic and inorganic ions and it does not require or emit any chemicals. However, the MBR process uses a separation membrane (MF), which requires frequent film cleaning due to fouling caused by a high concentration of mixed liquor suspended solid (MLSS). In this study, process improvement and microbubble cleaning efficiency were evaluated to improve the differential pressure, water flow, and MF fouling, which are the biggest disadvantages of operating the MF. The existing MBR method was improved by installing a precipitation tank between the air tank and the MBR tank in which raw water was introduced. Microbubbles were injected into a separation membrane tank into which the supernatant water from the precipitation tank was introduced. The microbubble generator was operated with a 15 day on, 15 day off cycle for 5 months to collect discharged water samples (4L) and measure TOC. As the supernatant water from the precipitation tank flowed into the separation membrane tank, about 95% of the supernatant water MLSS was removed so the MF fouling from biological contamination was prevented. Due to the application of microbubbles to supernatant water from the precipitation tank, the differential pressure of the separation membrane tank decreased by 1.6 to 2.3 times and the water flow increased by 1.4 times. Applying microbubbles increased the TOC removal rate by more than 58%. This study showed that separately operating the air tank and the separation membrane tank can reduce fouling, and suggested that applying additional microbubbles could improve the differential pressure, water flow, and fouling to provide a more efficient advanced treatment method.

• Journal of Bio-Environment Control
• /
• v.32 no.2
• /
• pp.89-96
• /
• 2023

This study was conducted to apply with an air duct for the cooling and a utilizing cultivating method that uses the fruiting node and the defoliation to the high-temperature vertical and hydroponic cultivation of the oriental melon. The lower fruiting node (LF) was to remove all third vines generated from 5 nodes of a secondary vine. The higher fruiting node (HF) was fruiting on the third vine generated from a first node of the third vine. The direction of the stem string; upward (UW), downward (DW). Four treatment conditions were applied with the LF-UW, LF-DW, HF-UW (control), and HF-DW. The leaf age of melon leaves was measured for photosynthesis at 3 days intervals, and the fruit characteristic was conducted on 79 fruits in each treatment. The photosynthesis rate steadily increased after leaf development, reaching 20.8 μmol CO₂·m^-2·s^-1 on the 10 days, gradually increasing to 21.3 μmol CO₂·m^-2·s^-1 on the 19 days, and reaching 23.4 μmol CO₂·m^-2·s^-1 on the 32 days. After that, it lowered to 16.8 μmol CO₂·m^-2·s^-1 on the 38 days and dropped significantly to 7.6 μmol CO₂·m^-2·s^-1 on the 47 days. As a result of the fruit characteristics by fruiting nodes, the treatments of the fruit length was 12.6-13.4 cm, respectively, which was significant, and the fruit width was 7.9- 8.6 cm, respectively, was not significant. The soluble content ranged from 12.9 to 15.7°Brix, and the significance of all treatments, and higher than of LF-DW and HF-UW. The photosynthesis rate of melon leaves was good until 32 days after leaf development, but after that, the rate decreased. As for fruit quality, it was conformed that melons can be cultivated at the LF because the fruit enlargement and soluble content dose not decrease even when set at the LF. Results indicated that those can be used for LF and defoliation in the development of vertical and hydroponic cultivation method in high-temperature season.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.1
• /
• pp.45-51
• /
• 2019

Purpose: The clinical and radiological results of patients with type 3 talar neck fractures treated with the anteromedial approach using medial malleolar osteotomy and large distractor were analyzed retrospectively. Materials and Methods: From March 2009 to August 2016, 12 patients with a type 3 talar neck fracture, who underwent the anteromedial approach using a medial malleolar osteotomy and large distractor and who could be followed-up for more than 12 months after the operation, were examined. The patients were examined for the presence of Hawkins signs by anteroposterior and lateral radiographs and osteonecrosis by magnetic resonance imaging (MRI) on the postoperative 3 months. Subsequently, every 3 months, radiographic union was assessed by a simple radiograph and clinical symptoms. Twelve months postoperatively, posttraumatic arthritis was assessed and the American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score was analyzed. Results: In 7 cases, osteonecrosis was found on MRI performed 3 months after surgery. On the other hand, at the 12 months follow-up, all of them obtained AOFAS scores of 83.86±4.53 without surgical treatment. Radiographic union was achieved in all cases. The mean union period was 5.3 months. In 10 cases, traumatic arthritis was found after the radiographical and clinical evaluation. In addition, all of them could carry on everyday life by conservative treatment. The AOFAS ankle-hindfoot score was measured to be 85.17 on average. Other complications included superficial wound infection in 2 cases. Conclusion: An anteromedial approach using a medial malleolar osteotomy and a large distractor in the surgical treatment of patients with type 3 talar neck fractures can achieve anatomical reduction of the displaced fragment without a lateral dissection. This is considered to be another good surgical option.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.4
• /
• pp.232-239
• /
• 2023

This study was to evaluate the values of Korean native sweet sorghum as a new feed crop for ruminants. Sweet sorghum was the Muan native species (Bioenergy Crop Research Center, National Institute of Crop Science), and cultivated from May to October 2021 at Sangji University (Wonju-si, Gangwon-do, Korea). There were a non-treated group (Con), a recommended amount treatment (RD) and a treatment with double the recommended amount (Double RD) by an oil cake fertilizer. Plant height was measured at weekly intervals for 12 weeks after planting sweet sorghum seedlings, and was a significant difference in the order of Double RD, followed by RD and Con in 7 weeks (p<0.05). Feed values and sugar contents were measured in 7, 9, and 11 weeks. Crude protein of Double RD was higher than that of the other treatments in 7 and 9 weeks (p<0.05). Crude fat was higher at Double RD than the other one in 9 weeks (p<0.05). ADF and NDF of Double RD were higher than the other one (p<0.05). When it was compared to corn and sudangrass hybrids grown on farms, Crude protein was lower in sweet sorghum than other crops (p<0.05), and crude fat was higher in sweet sorghum than corn (p<0.05). Crude fiber, ADF and NDF were higher in sweet sorghum compared to corn and sudangrass (p<0.05). The sugar contents of sweet sorghum were 4.07 ± 0.12~7.63 ± 0.21 brix, and showed higher than corn and sudangrass hybrid (p<0.05). The rumen in situ digestibility of sweet sorghum was 30.73~38.13% at the 9th and 11th weeks, and showed higher than that of corn and sudangrass hybrids (p<0.05). Therefore, it is considered that Korean native sweet sorghum has sufficient value as a new forage crop for ruminants, and good value as yield, nutrients and digestibility, when the grass height is 273.33~332.50 cm.

• The Journal of Korean Society for Radiation Therapy
• /
• v.35
• /
• pp.23-31
• /
• 2023

Purpose: The purpose of this study is to evaluate the usefulness of Non-Treat Functionality Volumetric Modulated Arc Therapy(NTF-VMAT) and Treat Functionality VMAT(TF-VMAT) treatment plans in reducing the low-dose area during radiation therapy for patients with multiple metastatic cancers. Materials and Methods: The study was conducted on an Arccheck phantom, treatment planning target locations were set in pairs at intervals of 2 cm, 4 cm, and 6 cm on the X, Y, and Z axes. Based on these location settings, the volume of the low-dose area in NTF-VMAT and TF-VMAT was measured and compared. Results: The results of the study showed that, within a prescription dose range of 10% ~ 70%, the difference in low-dose area volumes across each axis was as follows: On the X-axis, there was a maximum difference of -47.6% and a minimum difference of -2.2%. On the Y-axis, there was a maximum difference of -17.5% and a minimum difference of -7.3%. The Z-axis showed a maximum difference of -39.7%, with the smallest difference being -6.8%. Conclusion: In radiation therapy for patients with multiple metastatic cancers, the TF-VMAT treatment plan was able to reduce the low-dose area by 10-40% compared to NTF-VMAT. This suggests that utilizing Treat Functionality, which includes the Island block technique, improves dose distribution and minimizes side effects, making it beneficial for the treatment of patients with multiple metastatic cancers.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.72-81
• /
• 2024

Purpose: This study aimed to assess the marginal and internal fit of 3-unit monolithic zirconia fixed partial dentures (FPDs) fabricated via computer-aided design and computer-aided manufacturing (CAD/CAM) from solid working casts and removable die system. Materials and Methods: The tooth preparation protocol for a zirconia crown was executed on the mandibular right first premolar and mandibular right first molar, with the creation of a reference cast featuring an absent mandibular right second premolar. The reference cast was duplicated using polyvinyl siloxane impression, from which 20 working casts were fabricated following typical dental laboratory procedures. For comparative analysis, 10 FPDs were produced from a removable die system (RD group) and the remaining 10 FPDs from the solid working casts (S group). The casts were digitized using a dental desktop scanner to establish virtual casts and design the FPDs using CAD. The definitive 3-unit monolithic zirconia FPDs were fabricated via a CAM milling process. The seated FPDs on the reference cast underwent digital evaluation for marginal and internal fit. The Mann-Whitney U test was applied for statistical comparison between the two groups (α = 0.05). Results: The RD group showed significantly higher discrepancies in fit for both premolars and molars compared to the S group (P < 0.05), particularly in terms of marginal and occlusal gaps. Color mapping also highlighted more significant deviations in the RD group, especially in the marginal and occlusal regions. Conclusion: The study found that the discrepancies in marginal and occlusal fits of 3-unit monolithic zirconia FPDs were primarily associated with those fabricated using the removable die system. This indicates the significant impact of the fabrication method on the accuracy of FPDs.

• Journal of the Korean Society of Radiology
• /
• v.82 no.3
• /
• pp.670-681
• /
• 2021

Purpose This study aimed to investigate the optimal threshold value in Hounsfield units (HU) on CT to detect the solid components of pulmonary subsolid nodules using pathologic invasive foci as reference. Materials and Methods Thin-section non-enhanced chest CT scans of 25 patients with pathologically confirmed minimally invasive adenocarcinoma were retrospectively reviewed. On CT images, the solid portion was defined as the area with higher attenuation than various HU thresholds ranging from -600 to -100 HU in 50-HU intervals. The solid portion was measured as the largest diameter on axial images and as the maximum diameter on multiplanar reconstruction images. A linear mixed model was used to evaluate bias in each threshold by using the pathological size of invasive foci as reference. Results At a threshold of -400 HU, the biases were lowest between the largest/maximum diameter of the solid portion of subsolid nodule and the size of invasive foci of the pathological specimen, with 0.388 and -0.0176, respectively. They showed insignificant difference (p = 0.2682, p = 0.963, respectively) at a threshold of -400 HU. Conclusion For quantitative analysis, -400 HU may be the optimal threshold to define the solid portion of subsolid nodules as a surrogate marker of invasive foci.

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.107-117
• /
• 2024

This study investigated temporal changes in forest physical variables and their effects on thermal comfort and physiological and psychological responses. Environmental factors (air temperature, mean radiant temperature, wind speed, and relative humidity), the predicted mean vote (PMV), and the predicted percentage of dissatisfied (PPD) visitors were continuously measured between 9:00 AM and 6:00 PM. We assessed the physiological and psychological responses (heart rate variability, heart rate, oral temperature, blood pressure, pulse rate, thermal sensation vote, comfort sensation vote, and subjective feelings) of 30 male university students (average age: 21.7±1.9 years), who closed their eyes and relaxed for 5 minutes every hour. Examination of correlations between environmental factors and physiological responses showed that ① the mean radiant temperature, wind speed, and relative humidity significantly changed with time; ② PMV and PPD also showed significant changes over time, and the thermal sensation vote corresponded with PMV; however, the comfort sensation vote did not correspond with PPD; ③ Among the physiological responses, parasympathetic nerve activity, sympathetic nerve activity, heart rate, and diastolic blood pressure significantly varied with time, with parasympathetic nerve activity having the lowest value and sympathetic nerve activity the highest at the highest air temperature (2:00-4:00 PM); and ④ Air temperature, mean radiant temperature, and wind speed showed a negative correlation with parasympathetic nerve activity and a positive correlation with sympathetic nerve activity. These findings indicate that the relaxation effects of the forest environment depend on what time of day people are exposed to it, and the changes occurring in forest environmental factors over time modulate these effects.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.479-492
• /
• 1997

Background : Isoniazid(INH) and rifampicin(RFP) are potent antituberculous drugs which have made tuberculous disease become decreasing. In Korea, prescribed doses of INH and RFP have been different from those recommended by American Thoracic Society. In fact they were determined by clinical experience rather than by scientific basis. Even there has been. few reports about pharmacokintic parameters of INH and RFP in healthy Koreans. Method : Oral pharmacokinetics of INH were studied in 22 healthy native Koreans after administration of 300 mg and 400mg of INH to each same person successively at least 2 weeks apart. After an overnight fast, subjects received medication and blood samples were drawn at scheduled times over a 24-hour period. Urine collection was also done for 24 hours. Pharmacokinetics of RFP were studied in 20 subjects in a same fashion with 450mg and 600mg of RFP. Plasma and urinary concentrations of INH and RFP were determined by high-performance liquid chromatography(HPLC). Results : Time to reach peak serum concentration (Tmax) of INH was $1.05{\pm}0.34\;hrs$ at 300mg dose and $0.98{\pm}0.59\;hrs$ at 400mg dose. Half-life was $2.49{\pm}0.88\;hrs$ and $2.80{\pm}0.75\;hrs$, respectively. They were not different significantly(p > 0.05). Peak serum concentration(Cmax) after administration of 400mg of INH was $7.14{\pm}1.95mcg/mL$ which was significantly higher than Cmax ($4.37{\pm}1.28mcg/mL$) by 300mg of INH(p < 0.01). Total clearance(CLtot) of INH at 300mg dose was $26.76{\pm}11.80mL/hr$. At 400mg dose it was $21.09{\pm}8.31mL/hr$ which was significantly lower(p < 0.01) than by 300mg dose. While renal clearance(CLr) was not different among two groups, nonrenal clearance(CLnr) at 400mg dose ($18.18{\pm}8.36mL/hr$) was significantly lower than CLnr ($23.71{\pm}11.52mL/hr$) by 300mg dose(p < 0.01). Tmax of RFP was $1.11{\pm}0.41\;hrs$ at 450mg dose and $1.15{\pm}0.43\;hrs$ at 600mg dose. Half-life was $4.20{\pm}0.73\;hrs$ and $4.95{\pm}2.25\;hrs$, respectively. They were not different significantly(p > 0.05). Cmax after administration of 600mg of RFP was $13.61{\pm}3.43mcg/mL$ which was significantly higher than Cmax($10.12{\pm}2.25mcg/mL$) by 450mg of RFP(p < 0.01). CLtot of RFP at 450mg dose was $7.60{\pm}1.34mL/hr$. At 600mg dose it was $7.05{\pm}1.20mL/hr$ which was significantly lower(p < 0.05) than by 450mg dose. While CLr was not different among two groups, CLnr at 600 mg dose($5.36{\pm}1.20mL/hr$) was significantly lower than CLnr($6.19{\pm}1.56mL/hr$) by 450mg dose(p < 0.01). Conclusion : Considering Cmax and CLnr, 300mg, of INH and 450mg RFP might be sufficient doses for the treatment of tuberculosis in Koreans. But it remains to be clarified in the patients with tuberculosis.