• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.24 no.2
• /
• pp.317-326
• /
• 1994

Panoramic radiographs of a dry skull were used to evaluate the accuracy of four panoramic dental X-ray systems in determining tooth angulations in the buccal segments. The four machines evaluated were the Philips Oralix Pan DC, the GE panelipse, the SS White panorex 1, and the SS White Panorex 2. Panoramic radiographs were taken at six different patient positions for each machine to evaluate the effects of patient positioning on determining tooth angulations in the buccal segments. All of the machines studied showed a significant correlation between the mean radiographic estimates and the actual measurements regardless of positioning(p<0.05). With correct placement of the skull, the results were analyzed for an error tolerance of +/-3/sup 0/ between the actual measurements and the radiographic estimates for tooth angulation. The SS White Panorex 1 was accurate 74% of the time, the GE Panelipse was accurate 67% of the time, the Philips Oralix Pan DC and the SS White Panorex 2 were accurate 64% of the time. When an error tolerance of +/-5/sup 0/ was permitted, the accuracy was 89% for the SS White Panorex 1 and the GE Panelipse, 85% for the Philips Oralix Pan DC, and 81% for the SS White Panorex 2.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.4
• /
• pp.28-35
• /
• 2021

Infrared (IR) stealth technology to protect aircraft from heat-tracking missiles is a very important factor in the development of military aircraft. In this study, the intensities of signal generation were compared by observing the IR signals generated from the plumes of the engine and identifying them for each measurement angle. To simulate a jet engine applied to an actual aircraft, a small turbojet engine was constructed, the infrared signal characteristics for each wavelength were identified according to the measurement angle, and the total infrared radiance was derived by integrating the signal for each wavelength. Through this study, we intend to present basic data for improving the infrared stealth performance of aircraft.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.2
• /
• pp.157-161
• /
• 1993

결정화 유리에서의 결정질 양의 측정, 혹은 소결체에서의 잔류 유리량을 측정할 때 유용한 방법을 찾아내기 위하여 현재까지 보고되어 있는 방법중에서 XRD를 이용한 Ohlberg의 방법과 Wakelin등의 방법을 이용하여 코디어라이트 조성의 유리와 α-코디어라이트의 혼합물에 대하여 결정질 양을 측정하였다. Ohlberg의 방법은 한 각도에서 측정하는 경우, 약 4∼5%의 오차를, 4각도에서 측정하여 평균한 경우에는 2∼3%의 오차를 보였으며, Wakelin등의 방법은 실험 양이 많았지만 2∼3%의 오차를 보였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.128-129
• /
• 2000

3차원 형상측정에서 많이 쓰이고 있는 모아레 간섭계에는 그 setup에 따라 Projection Type과 Shadow Type이 있다. 이러한 모아레 간섭계는 광원과 측정 카메라의 각도에 의해 물체의 형상을 측정하게 된다. 그러나, 이러한 광원과 측정 카메라의 각도에 의해 생겨나는 그림자에 의한 영향 때문에 물체의 형상이 굴곡이 심한 곳은 측정하기 어렵다. 본 논문에서는 아래 그림과 같이 두 개 이상의 광원을 사용하여 그 영향을 줄이기 위한 방법을 제안하였다. 이 방법은 projection type이나 shadow type에서 동일하게 적용 가능할 것으로 예상된다. (중략)

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.2
• /
• pp.80-85
• /
• 2020

Recently the incidence of musculoskeletal disorders in students and office workers is increasing, and the necessity of maintaining correct posture and corrective training is required, but related research is insufficient. In the previous study, a membrane sensor or a pressure sensor was placed on the seat cushion to see the deviation of the body weight, or a sensor that restrained the user was attached to measure the position change. In this study, a sensor device for detecting a position change in consideration of wearing comfort was developed, and the measured angle was verified through an analysis app. A sensor device consisting of an IMU sensor is attached to the cervical spine and vertebra spine to measure the position transformation in the sitting position. The change value of the position measured by the two sensors was converted into an angle, and the angle value is displayed in real time through the analysis app. In this study, the possibility of measuring the real-time change value according to the change in position, the convenience of wearing, and the tendency of angle measurement were proved. Future research should proceed with more precise angle calculation and correction of motion noise.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2541-2544
• /
• 2003

새로운 원리에 의한 원격 거리 및 각도측정 시스템［1］［2］(이하 TS, Total Station)을 개발하였다. 본 시스템은 마이크로 터널링 공법의 굴진기의 후미 또는 임의의 기준점에 원격으로 점멸할 수 있는 십자형의 발광체를 부착하고, 추진관에 고정시킨 상하좌우 각도측정 및 비접촉식 레이저 거리측정기가 부착된 무인 원격 제어장치에 의하여 십자형 발광체의 중심을 자동으로 검출한다. 또한. 회전각과 CCD 라인 스캔 센서의 조합에 의하여 각도를 정밀하게 원격 측정하게 된다. 한편 본 시스템을 이용하면 마이크로 터널링 공법에 의한 추진관내의 측정 가능한 범위를 연결하는 위치에 복수의 TS를 배치하여 서로의 위치를 자동으로 계측하고 그들 데이터를 컴퓨터에 의하여 계산함으로써, 맨홀의 임의의 기준점으로부터 굴진기의 현재 좌표를 신속하고 정확하게 계산할 수 있다.

• 재활복지
• /
• v.22 no.2
• /
• pp.213-230
• /
• 2018

The study looked at the impact on the health of the spine caused by the increasing addiction to smart phones, and examine the moderating effect of adjusting spinal health according to cognitive strength. All subjects used the smartphone by measuring the diagnostic scale of the smartphone addiction, the angle of forward inclination of the cervical spine, and the amplitude variation of the cognitive Gamma-Peak of the brain waves. As a result, as the use of smart phones increases, the spine angle significantly increased (p<0.001), as cognitive strength increased, the spine angle decreased significantly (p<0.01). The cognitive strength also showed the effect of adjusting the spine angle through interaction with the degree of use of a smartphone (p<0.05). This results in a higher degree of smartphone use in lower and middle cognition strength groups, which results in a higher angle of forward tilt in the cervical spine.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.96-102
• /
• 2009

In this paper, the effects of the position and the angle of the potential probes on the measurements of the ground resistance with the fall-of-potential method are described and the testing techniques to minimize the measuring errors are proposed. The fall-of-potential method is theoretically based on the potential and current measuring principle and the measuring error is primarily caused by the position and angle of auxiliary probes. In order to analyze the relative error for measuring value of ground resistance due to the position of the potential probe, ground resistance were measured in case that the distance of current probe was fixed at 50[m] and the distance of potential probe was located from l0[m] to 50[m]. Also, the potential probe was located at 30[$^{\circ}$], 45[$^{\circ}$], 60[$^{\circ}$], 90[$^{\circ}$] and 180[$^{\circ}$]. As a consequence, relative error decreased with increasing the distance of potential probe and decreasing the angle between current probe and potential probe. The results could be help to determine the position of potential probe when the ground resistance was measured at grounding system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.134-138
• /
• 2021

Various types of precision plastic thin films are used widely in high-performance displays, such as smartphones. For plastic thin-films manufactured by the Roll-to-Roll process, the film thickness must be measured and managed while moving. In the Roll-to-Roll process, wrinkles are generated when tension is applied to the film, which causes an inclination on the optical axis of the thickness gauge, resulting in a loss of accuracy. Therefore, this study attempted to develop an optical interference tomography measurement system. In this study, the tilt angle of the film was measured to correct the measurement value error in the thickness gauge caused by the tilt of the film. The system was constructed so that the laser was irradiated on the tilted film, and the laser reflected from the film was formed on the PSD. The relationship between the tilt angle of the film and the output value of the PSD was obtained experimentally. Using this, a device to measure the tilt angle of the film was constructed, and angle measurements were taken at a speed of 250,000Hz.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.532-535
• /
• 2014

This paper analyzed thermal characteristics of super junction MOSFET using process and design parameters. Trench process is very important to super junction MOSFET process. We analyzed the difference of temperature, thermal resistance, total power consumption according to trench etch angle. As a result we obtained minimum value of temperature difference and thermal resistance at $89.3^{\circ}$ of trench etch angle. The electrical characteristics distribution of super junction MOSFET is not showed tendency according to trench etch angle. We need iterative experiments and simulation for optimal value of electrical characteristics. The super junction power MOSFET that has superior thermal characteristics will use automobile and industry.