• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06d
• /
• pp.52-53
• /
• 2011

차세대 위치기반 서비스의 최종 형태는 실내외 구분 없이 서비스를 제공하여야 한다. 그러나 실내에서 정확한 GPS 정보를 얻기 힘들기 때문에 실내와 실외에서 서로 다른 측위방식이 사용되고 있다. 따라서 실내외 연속측위를 수행하기 위해서는 실내좌표의 값을 실외에서 사용하는 GPS 좌표로 변환할 수 있어야 한다. 본 논문에서는 실내측위 시 위치 변화에 GPS 변화율을 적용하여, 실내측위의 변화에 따라 GPS 값의 변화를 주어 실내에서도 GPS정보를 얻을 수 있는 방법을 제안한다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.4
• /
• pp.51-58
• /
• 2003

Satellite-based positioning system such as global positioning system(GPS) has played a major role in data capture technology for constructing GIS database. Recent advances in satellite-based positioning technology have made the task of precisely locating features fast, easy, and inexpensive, and determined their current latitude and longitude. However, there are still situations where satellite-based positioning service will not provide users with desired precision such as in urban environments, that is, the only severe handicap still hampering satellite-based positioning is the well-known problem of restricted satellite visibilities. As the majority of the creation and updating of road and street network are carried out in urban environments, the obstruction problem considerably impedes the wider application of satellite-based positioning. This paper presents the current GPS-based positioning environment for GIS data acquisition in urban areas. A field experiment with measurement vehicle has been performed under varying operational conditions and areas where shading of satellite signal is encountered due to buildings and overpasses with measurement vehicle in order to evaluate the availability of existing GPS-based positioning. We found that the current GPS-base positioning system we used in this study was insufficient for a precise GIS data acquisition. This research would make a contribution for the development of base data to supplementary technology, which can complement the existing GPS-based positioning.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.4
• /
• pp.49-55
• /
• 2015

This paper explains major considerations for integrated GPS/GLONASS/BDS positioning, and then analyzes integrated GNSS positioning accuracies based on low-cost receivers in open-sky and poor reception environments. In an open-sky environment, horizontal RMSE of the integrated system positioning is about 1.2m. It shows improved result compared with single system positioning, the improvement ratio was 17-55%. In poor reception environments, we sometimes could not do positioning because the number of visible satellites gets below four. In an integrated positioning mode, the number of visible satellites was always higher than four, allowing us to find positions all the time. The horizontal RMSE of the integrated system positioning in poor reception environments is about 6.4m. Compared with single system positioning;the integrated system positioning shows better performance and the improvement ratio was 8-47% for the horizontal directions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.9
• /
• pp.570-577
• /
• 2014

Range-based real time localization systems require superior localization techniques as well as accurate ranging algorithms for better performance. To evaluate the ranging accuracy between two nodes in practical environments, this paper does not only present a qualitative analysis by computing a distance equation under SDS-TWR measurement model of no symmetry assumption, but also executes a quantitative evaluation by doing experiments after building up a test network employing the developed sensor node. Experimental results show that the ranging accuracy of the proposed implementation of IEEE 802.15.4a software stack is superior with smaller average error rate by 60% to one of the commercial Nanotron's reference development kit.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.86-89
• /
• 2016

실내 위치 인식 기술은 Wi-Fi, Bluetooth Low Energy 등 여러 기술을 통해 시도되어 왔으며, 실내 위치 인식 시스템의 상용화가 급증하는 추세이다. 대표적인 실내 측위 시스템인 Wi-Fi 기반 실내 측위는 고출력으로 넓은 범위에 서비스를 제공해주지만, 각 AP 마다 파워 출력이 다르기 때문에 위치 인식 측면에서의 오차가 발생하고, Bluetooth Low Energy 기반 실내 측위는 10m Cell 내에서는 정확한 인식이 가능하지반, 10m 거리 밖 오차는 매우 크다. UWB(Ultra Wide Band)[1][2][3]는 저전력으로, 3.1~10.6GHz의 대역올 이용하여, Wi-Fi의 10배 이상의 속도로 데이터를 전달한다. 이때, 데이터 전달에 사용되는 전파신호는 레이더 신호와 유사한 특징을 가져 거리측정에 사용될 수 있으며, 실내 측위 시 15cm 이내의 정확도를 가진다. 본 논문에서는 UWB의 광대역을 이용한 핑거프린팅과 정밀 측위를 위한 TDoA 기법을 이용한 정밀 실내 측위 알고리즘을 제안한다.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.564-573
• /
• 2015

GPS is the representative positioning technology for providing the location information. This technique has the disadvantage that does not operate in the shadow areas, such as urban or dense forest and the interior. This paper proposes a hybrid indoor positioning algorithm, which estimates a more accurate location of the terminal using strength of the Wi-Fi signal from the indoor AP. To determine the location of the user, we establish the most appropriate path loss model for the measurement environment. by using the RSSI value measured in a variety of environment such as building structure, person, distance, etc. The path loss exponent obtained by the path loss model is changed according to the environment. REKF, PF estimate the position of the terminal by using measured value from the AP with path loss exponent. For more accurate position estimation, we select positioning system by the value of threshold measured by experiments rather than a single positioning system. Experimental results using the proposed hybrid algorithm show that the performance is improved by about 17% than the conventional single positioning method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.9-15
• /
• 2005

Most of location systems use RF signal. Because multipath is too severe at indoor environment, RF signal are usually used in outdoor positioning such as GPS. To overcome the difficulty at indoor positioning, m positioning is recently developed and is being vigorously studied. Some standardizations on UWB are in progress at IEEE 802.15 committee. In developing UWB positioning system, we should consider the synchronization of sensor network, positioning algorithm, sensor allocation, and so on. This paper presents a comparison of TDOA positioning algorithms that are widely used in location systems. Two algorithms are compared; one is derived by linearization, and the other is by analytic solution(CH algorithm). Simulation results show that the CH algorithm is superior to the linearized least square at indoor environment in that CH algorithm shows consistent positioning performance regardless of the visibility and geometry of basestations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.10
• /
• pp.20-28
• /
• 2011

This paper proposes a reliable high-precision positioning system that converges a satellite navigation system and a vision system in order to resolve position errors and outdoor shaded areas, two disadvantages of a satellite navigation system. In kinematic point positioning, the number of available satellite navigation systems changes in accordance with a moving object's position. For location determination of the object, it should receive location data from at least four satellite navigation systems. However, in urban areas, exact location determination is difficult due to factors like high buildings, obstacles, and reflected waves. In order to deal with the above problem, a vision system was employed. First, determine an exact position value of a specific building in urban areas whose environment is poor for a satellite navigation. Then, identify such building by a vision system and its position error is corrected using such building. A moving object can identify such specific building using a vision system while moving, make location data values, and revise location calculations, thereby resulting in reliable high precision location determination.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.6 s.312
• /
• pp.1-9
• /
• 2006

For the indoor positioning, wireless fingerprinting is most favorable because fingerprinting is most accurate among the techniques for wireless network based indoor positioning which does not require any special equipments dedicated for positioning. The deployment of a fingerprinting method consists of off-line phase and on-line phase. Off-line phase is not a time critical procedure, but on-line phase is indeed a time-critical procedure. If it is too slow then the user's location can be changed while it is calculating and the positioning method would never be accurate. Even so there is no research of improving efficiency of on-line phase of wireless fingerprinting. This paper proposes a decision-tree method for wireless fingerprinting and performs comparative analysis of the fingerprinting techniques including K-NN, Bayesian and our decision-tree.

• The KIPS Transactions:PartC
• /
• v.16C no.5
• /
• pp.645-652
• /
• 2009

Location-based service providing the customized information or service according to the user's location has attracted a lot of attention from the mobile communication industry. The service is realized by means of several building blocks, a localization scheme, service platform, application and service. The localization scheme figures out a moving target's position through measuring and processing a wireless signal. In this paper, we propose an adaptive localization scheme in an indoor localization system based on IEEE 802.15.4 standard. In order to enhance the localization accuracy, the proposed scheme selects the best reference points and adaptively reflects the changes of propagation environments of a moving target to approximate distances between the target and the reference points in RSS(Received Signal Strength) based localization system using triangulation. Through the implementation of the localization system, we verify the performance of the proposed scheme in terms of the localization accuracy.