• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.39-46
• /
• 2014

Network RTK GNSS positioning technique which has been developed to overcome the limitation of Single reference station RTK is used widely in the field of general surveying, cadastre surveying and engineering surveying due to the high accuracy and efficiency. It is specified Network RTK, Single reference station RTK and Static of GNSS as a surveying method in the regulation of Cadastre Re-survey Surveying. In this study, Network RTK and Static GNSS surveying were accomplished at cadastral re-survey field in Hadong, Gyeongnam and the surveying results were compared. Also, to analyze the performance of site calibration in Network RTK surveying, two types of Network RTK surveying with and without site calibration were accomplished and the results was compared. The research result shows that average positioning error between Network RTK(VRS) without site calibration and Static surveying result is 2.44cm and 1.53cm respectively and average positioning error between Network RTK(VRS) with site calibration and Static surveying result is 0.19cm and 0.82cm respectively at two zone. So, it was proved the effect of calibration in network RTK(VRS) surveying.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.305-315
• /
• 2020

The purpose of this study is to compare algorithms of single photo resection, which determines the exterior orientation parameters used in fields such as photogrammetry, computer vision, robotics, etc. To this end, the algorithms were compared by generating experimental data by simulating terrain based on a camera used in aerial and close-range photogrammetry. Through experiments on aerial photographic camera that was taken almost vertically, it was possible to determine the exterior orientation parameters using three ground control points, but the Procrustes algorithm was sensitive to the configuration of the ground control points. Even in experiments with a close-range amateur camera where the attitude angles of the camera change significantly, the algorithm was sensitive to the configuration of the ground control points, and the other algorithms required at least six ground control points. Through experiments with two types of cameras, it was found that cosine lawbased spatial resection shows performance similar to that of a traditional photogrammetry algorithm because the number of iterations is short and no explicit initial values are required.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.203-211
• /
• 2009

With supply of the domestic digital camera, the relative importance of the digital camera is coming to be high gradually on aerial photogrammetry, the image of digital camera is more applied in image map or digital topographic map production. But, there are cases that do not have position information or attitude information of each photograph in digital camera results. Therefore, we wish to present additional method to get more accurate photograph control point result. In this study, One is called A method, which is the case of entering positioning information of principal point from topographic map as default values that are need to extract tie point automatically using by 56 pieces of photography that are photographed by DMC to the extent to 5 courses and 35 GCP points. The other is called B-method, which is the case of entering exterior orientation parameters that are processed by block adjustment for A-method using by 4 control points in method-1 as default values. We have analyzed about results per control points arrangement for two cases using MATCH-AT that is photograph control point measurement S/W of Germany INPHO company. As a result of analysis, accuracy of B-method was better than that of A-method, and we could get more accurate results if block adjustments are executed including self calibration. Also, it is more effective in expense side that using self calibration for photograph survey in B-method because can reduce GCP numbers.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.389-398
• /
• 2002

As the necessity of land information has increased according to development of computer and Information-communication, people have been interested in the satellite measurement system that can update Cadastral and Geographical information rapidly and exactly. Most Cadastral base points which had limitation of measurement technology in the 1910s were less accurate and were destroyed through the Korean War. They also many problems in the process of reinstallation. So, they require the quick and correct method of measurement in re-equipment of a base point and a parcel based survey and so on. This study intends to present the GPS survey direction by understanding and analysing all sorts of problems rising in case of applying the GPS to cadastral area in order to increase the efficiency of the GPS measurement, and also develop the GPS kinematic survey program to apply to the efficiency of a kinematic survey. As a result of research, I could confirm the accuracy of Cadastral base points in Kwangju area by using Korea GPS array and a base point, and could get the result similar to existent cadastral survey result with the coordinate conversion program of Cadastral technology research institute. We however have to pay our attention to the transformation of the plane coordinates because the difference between tens of cm and the existing result can outbreak according to the Gauss conformal double projection method. And, I could figure out the practicality of the developed GPS kinematic survey program, compared with common use program. I expect that it can be applied to the digital cadastral survey and the cadastral map renewal as well.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.21-28
• /
• 2010

The classical RTK System requires that GPS data is transmitted from a single reference receiver to one or more roving units. But its error increase due to distance between reference and rover. VRS(Virtual Reference Station) system, a network of reference stations can be used to isolate the components of these systematic errors and use the resultant corrections to create Virtual Reference Stations at any location within the network. Use of a VRS significantly reduces the effects of systematic errors and improved accuracy. In this study, Network-RTK survey using VRS serviced by NGII(National Geographic Information Institute) was performed and the results were compared with results of total station surveying and notified coordinates of cadastral control points for utilization assessment of VRS.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.445-458
• /
• 2012

The objective of GPS control surveying is ultimately to determine coordinate sets of control points within targeted accuracy through a series of observations and network adjustments. To this end, it is of equivalent importance for the accuracy of these coordinates to be realistically represented by using an appropriate method. The accuracy representation can be quantitively made by the variance-covariance matrices of the estimates, of which features are sensitive to the mathematical models used in the adjustment. This paper deals with impact of functional and stochastic modeling techniques into the accuracy representation of the GPS control surveying with a view of gaining background for its standardization. In order to achieve this goal, mathematical theory and procedure of the single-baseline based multi-session adjustment has been rigorously reviewed together with numerical analysis through processing real world data. Based on this study, it was possible to draw a conclusion that weighted-constrained adjustment with the empirical stochastic model was among the best scheme to more realistically describe both of the absolute and relative accuracies of the GPS surveying results.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.293-298
• /
• 2014

Recently, the direct georeferencing has been becoming a common method in the aerial photogrammetry. As this direct georeferencing method using converged sensor of the digital photogrammetry camera and GPS(Global Positioning System)/INS(Inertial navaigation System), more rapid and accurate aerial photogrammetry has improved following advanced performance in photogrammetry. Since the accuracy of EO parameters from the direct georeferencing is determined by GPS/INS accuracy, it is significant to calculate the exact attitude information using values of INS rotations. For following calculations, the misalignment, such as INS rotation and the gap of GPS/INS, has to be decided. Because the number of ground control points are used for tirangulation and boresight calibration, those results should be different according to array and location of ground control points. In the study, those location and array of ground control points were tested to be used boresight calibration. As a result, there is no significant change of misalignment and exterior orienation parameters in the case when ground control points were at all course. On the contrarily, the difference has been shown in the case of no ground control point at course.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.154-163
• /
• 2015

This study is based on deductions from analysis of historical changes in hydrographic surveys, the problems with the existing system in Korea and analysis of the literature, including foreign cases. Using these criteria, we created and administered a survey of marine professionals of Korea, and based on the results, established an order of priority for hydrographic surveys, as follows: changes in the seabed, quantities of marine traffic, existing performance data from hydrographic survey, consumer's demand, marine accidents, conservation of oceanic environment, and natural resources. The study also deduced, based on a survey of experts, the relative importance ranking of the major ports in South Korea and suggests policy implications and a priority decision model to conduct future hydrographic surveys in a more scientific and systematic way.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.457-467
• /
• 2018

Currently, the regulation and rules for public surveying and the UCPs (Unified Control Points) adapts those of the triangulated traverse surveying. In addition, such regulations do not take account of the unique characteristics of GNSS (Global Navigation Satellite System) surveying, thus there are difficulties in field work and data processing afterwards. A detailed procesure of GNSS processing has not yet been described either, and the verification of accuracy does not follow the generic standards. In order to propose an appropriate procedure for field surveys, we processed a short session (30 minutes) based on the scenarios similar to actual situations. The reference network in Seoul was used to process the same data span for 3 days. The temporal variation during the day was evaluated as well. We analyzed the accuracy of the estimated coordinates depending on the parameterization of tropospheric delay, which was compared with the 24-hr static processing results. Estimating the tropospheric delay is advantageous for the accuracy and stability of the coordinates, resulting in about 5 mm and 10 mm of RMSE (Root Mean Squared Error) for horizontal and vertical components, respectively. Based on the test results, we propose a procedure to estimate the daily solution and then combine them to estimate the final solution by applying the minimum constraints (no-net-translation condition). It is necessary to develop a web-based processing system using a high-end softwares. Additionally, it is also required to standardize the ID of the public control points and the UCPs for the automatic GNSS processing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.778-778
• /
• 2012

수문조사시설 중 하나인 영점표고검정수준점은 장기간의 시간 경과에 따른 하천 수문관측 환경변화로 망실 및 침하 등으로 인한 신뢰도가 저하되고 있는 것이 현실이다. 수위표 영점표고는 일반적으로 하상부터 자유수면의 높이까지를 일컫는 수위에 대한 기준 높이가 되는 값으로 영점표고의 변동은 수위의 변동을 초래하기 때문에 관측된 수위의 시계열 연속성을 확보하기 위해서는 영점표고검정수준점의 신뢰도가 대단히 중요하다. 따라서 본 연구에서는 수문자료에 직접적인 품질에 영향을 줄 수 있는 영점표고검정수준점에 대하여 체계적이고 전문적인 공공측량을 실시하였으며, 왕복수준측량 과정에서 발생할 수 있는 오류 및 오차를 검증하기 위해 RTK-GPS 측량을 병행 실시하였다. RTK-GPS 측량을 실시하기 전 낙동강권역내의 국립지리정보원에서 관리하고 있는 통합기준점을 대상으로 삼각망 구축을 실시하였다. RTK-GPS 측량의 결과를 토대로 직접수준측량과의 비교 검토를 실시하였으며, 두 측량성과간의 차이가 0.2m 이상을 경우에는 재 측량을 실시하여 발생될 수 있는 오류를 최소화 하였다. 또한 수준측량과 RTK-GPS 측량으로 확정된 영점표고검정수준점의 표고값을 이용하여 수위표 영점표고의 적정성을 검토하고자 하는 해발수위 비교를 실시하였다. 비교방법은 비교적 수면경사가 크게 나타나지 않는 지점을 선택하여 적정성을 검토하였으며, 기존 영점표고검정수준점보다 개선되는 효과를 얻을 수 있었다.