• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.361-366
• /
• 2004

GPS 관측기법을 지적측량에 도입하기 위하여 GPS를 이용한 새로운 지적측량 모형(Model)을 정립하는 연구와 관련 기술들을 개발하는 연구가 활발히 진행되고 있다. 이와 같은 추세에 발맞추어 GPS 자료처리 및 기준점 성과산출과 관련하여 국내ㆍ외 측량 관련 상용 GPS 자료처리 소프트웨어의 현황 및 성능을 파악하고, 자료처리 알고리즘을 분석하여, 우리 실정에 적합한 GPS 자료처리 소프트웨어를 개발하는 것을 본 연구의 목적으로 한다. 본 연구에서는 국내ㆍ외의 전문 업체, 기관(대학)이 보유하고 있는 상용 소프트웨어 현황 분석 및 자료처리 방법에 따른 오차 발생을 연구하여 기선해석, 망 조정, 좌표변환 등 에 관련된 전문 소프트웨어 기능을 비교 분석하여 자료처리 산출성과의 정확도를 향상시키는 방향을 모색한다. 또한 기존 GPS 자료처리 소프트웨어에 적용된 알고리즘을 분석하고 지적측량성과 산출에 최적인 알고리즘을 연구하여 새로운 지적기준점 성과 산출을 위한 지적측량 성과계산 소프트웨어를 개발한다.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.685-691
• /
• 2007

In this paper through Honan high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21 cm to 40 cm diminishing to a gentle straight line, distortion of X axis varies 14 cm to 29 cm. Through a revision, the deviation value between the coordinates were 6 mm to 9 mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey (10 cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.201-208
• /
• 1993

The emergence of the Global Positioning System(GPS) with its benefits of speed and economy now offers an opportunity to analyse, strengthen, densify and constitute the control network, in addition to providing mapping, cadastral and engineering control under the unfavorable conditions. This research aims at the using of GPS compared to conventional geodetic positioning techniques in Korean primary control networks. A GPS test network of 10km baselines, which is measured and analysed by Wild GPS-System 200, are compared to the distances from EDM and official coordinates, and relative GPS heights are transformed to the height differences on the mean sea level. The results of this study confirms that using GPS merely as a new type of instrument is the most powerful method for the densification of the control points retaining existing networks and existing computational procedures.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.511-518
• /
• 2012

It is well-known that non-metric digital cameras have to be calibrated for the close-range photogrammetry. But, the self-calibration is still not an easy task because it requires rather a large calibration site of accurate control points, multiple image acquisitions in different positions, and accurate image point measurements that are quite labor-intensive and time-consuming. Based on the premise, this study carried out check point accuracy analysis from self-calibration of different control point designs and photo combinations. The test results showed that the calibration using three photos covering three-dimensional control points produced high accuracy, but control points on a plane could attain the comparable accuracy with four photos including a 90-degree rotated photo. We then compared the target accuracy of on-site self-calibration using flat control points to that of laboratory-self calibration and observed comparable results.

• Korean Journal of Remote Sensing
• /
• v.24 no.4
• /
• pp.381-388
• /
• 2008

In the common practice of air-photographing measurement aerial-photogrammetric, the location of camera at the time of photographing is identified by performing aerotriangulation. However, installing ground-base station to enable aerotriangulation takes majority portion of a map making cost. Aerial-photogrammetric has shown a great improvement helped by steady upgrading in equipment and development in quantitative study. Aerotriangulation can be replaced by Direct Georeferencing, which uses GPS/INS to identify a camera location and to produce detailed information. An innovative technique replacing aerotriangulation, it has a disadvantage that base station has to be available in the area of photographing. The study intends to suggest a method applying VRS in GPS/INS aerotriangulation. Despite the fact that Direct Georeferencing is the innovated technique which substitutes existing aerotriangulation, it still need to install the ground-base station in GPS/INS aerotriangulation. GPS/INS data was analyzed with 4 different cases in order to accomplish the purpose of this study. In addition, in the thesis, it was approved that VRS can be utilized to make small-scale map as accurate as base station. This study is expected to improve the efficiency of work by showing that VRS can be used not only in base station but also enabling base station in the ground-access challenging area.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.499-505
• /
• 2004

현재 국내에서 활발히 이루어지고 있는 GPS 정밀측지측량은 획득된 GPS 관측값의 결과값이 GPS 기준점의 기하학적 강도와 분산계수의 상관관계의 연관성과의 분석없이 사용되고 있는 문제점을 파악하고 육지와 해상의 통합지리정보시스템구축을 위한 수치지도와 전자해도의 통합투영의 필요성에 의해서 이루어졌다. 본 연구의 목적은 크게 GPS 관측값의 정밀도를 향상시키는 방법과 수치지도와 전자해도의 통합투영으로 GPS 기준점들을 이용한 수치지도와 전자해도상의 경계선 오차량을 비교검토를 통해 수치지도와 전자해도의 통합관리의 방향을 제시하는데 있다. GPS 관측값의 정밀도 향상을 위한 방법제시를 위하여 GPS 망조정에 사용되는 3점의 기준점에 대한 기하학적인 강도에 따른 정밀도 분석방법과 분산계수의 변화에 따른 GPS 관측값들의 정밀도 분석방법으로 나누어 검토하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.1
• /
• pp.21-32
• /
• 1999

Mapping and precise point determination by photogrammetry have been shown to be an economic solution. But control points are necessary to determine the exterior orientation parameters. Although the number of required control points has been reduced based on extended bundle adjustment and reinforced cross-strip, the ground survey is a significant factor of whole expenses in photogrammetry. The status of GPS-photogrammetry with kinematic DGPS-positioning to overcome this disadvantages, is now steadly progressive since the first possibility has been proved. The completed satellite configuration, powerful receiver function and upgraded software for kinematic DGPS-positioning have extensively improved the accuracy of combined bundle adjustment. So the research for the operational use of GPS-photogrammetry is absolutely necessary. The presented test field was designed for identification of subsidences in a coal mining area, flown with 60％ sidelap and cross strips. Just with 6 control points and combined block adjustment instead of the traditionally used 21 horizontal and 81 vertical control points the same ground accuracy has been reached. The accuracy of kinematic GPS-positioning and combined block adjustment was independent upon the distance of the ground reference station. It also has been showed that the special model for the systematic error correction in the combined block adjustment.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.313-323
• /
• 2016

Recently, "Cadastral Confirmation Surveying" has been established to promote efficiently and systematically its work. To do so, it is necessary that cadastral control point should be set up and transverse grid coordinates should be determined for high accuracy and boundary restoration based on the cadastral control point. This study expects the potentially institutional problem of detail surveying and the limitation of Network-Real Time Kinematic, introduced to measure the cadastral control point first in the issued regulation, and thus presents the improvement and the management of the block boundary of larger parcel as solutions. This can be applied promptly, when the location difference of ground and border, registered in cadastral record for quake and others, occurs. Thus, the public confidence of cadastral record may become higher and relevant social costs get reduced by the advanced prevention effect of boundary dispute, which represents much to the management of cadastral institution. Provided cadastral confirmation surveying is implemented with the management of the block boundary of larger parcel, proposed in this study.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.39-46
• /
• 2002

This paper shows what is point to be considered at that time in cadastral settlement surveying after declination analysis between GPS and traditional surveying at coordinate result of cadastral triangulation points and supplementary point in site selected deplaning of streets which is surveyed traditional surveying. In the case that coordinates of cadastral triangulation assistance points was decided by standard of the existing cadastral triangulation points that direction of the error vector is in opposition, authors could know all errors was reduced inside coordinate by error being offset each other through the results of study. The coordinates result of cadastral triangulation point by standard of the cadastral triangulation points reduces the deviation value through error that an intersection points was centered being offset each other but through the result that a tendency of errors occurrence is analyzed goniometrys, supplementary points that is close to cadastral triangulation assistance points was affected by error of cadastral triangulation assistance points.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.29-40
• /
• 2002

In photogrammetry, the accuracy is analyzed by using the coordinate of the targeted position determined by the geometric principle, thus, the reliability depends on the accuracy of the coordinate of the targeted position. Thereby, geographic surveying is essential to perform such tasks, and it requires approximately $30{\sim}50%$ of total cost and times to produce a finalized map. The main purpose of this study is to determine the configuration of the disposition of minimum datum points and their configuration, which were determined by surveying values available through using the structure of block model based on the aerotriangulation. ortho projection image was produce and digital topographic map was achieved by the optima model(CASE7). We also performed comparative analysis about the result of local datum point and the accuracy of overlapping based on the surveying results. Consequently, it is possible to analyze the unknown position accurately with the optimal model., CASE 7, which is the minimum datum points configuration required to block adjustment. Furthermore, this optimal model, which provides the minimum datum points, results costs and time saving effects compared to the previous methodology.