• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.1
• /
• pp.65-70
• /
• 2014

This paper introduces a preform design method for a ring rolling process with an outer step. Underfilling is one of the general defects of the profile ring rolling process. It occurs when the deformation amount is small or step depth of the profiled region is large. To prevent underfilling, increasing the deformation amount or using a preform of size similar to that of the final product are required. Furthermore, the filling limit equation is suggested based on the shape factor and deformation ratio for preventing defects in the products. The filling limit equation has been derived through finite element analyses and production tests for four different cases. For verifying the suggested method, realsized profile rolling tests were performed, and test results were compared with the predictions of the equation.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.1-10
• /
• 2018

Although the soil nailing method is generally used as a gravity grouting, the development and application of pressurized grouting method has recently increased to address the problem of joint generation and filling due to grouting. Pressurized grouting of the soil nailing method is generally used in combination with ordinary portland cement and water. In the field, the cement is mixed with the rapid setting cement to reduce curing time because ordinary portland cement takes more than 10 days to satisfy the required strength. In this study, uniaxial compression tests and laboratory tests were carried out to confirm the efficiency of the grouting material according to the mixing ratio of rapid setting cement. The mixing ratio of 30% grouting satisfies the required strength within 7 days and satisfies the optimum gel time. As a result of the laboratory test with granite weathered soil, the reinforcing effect was confirmed to be 1.5 times as compared with the gravity type at an injection time of 10 seconds and a strain of 15%. The friction resistance increases linearly with the increase of the injection time, but it is confirmed that the friction resistance decreases due to the hydraulic fracturing effect at the injection time exceeding the limit injection pressure. Numerical analysis was performed to compare the stability of slopes not reinforced with slopes reinforced with gravity and pressurized soil nailing.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.342-351
• /
• 2019

The optimum N concentrations incorporated as pre-planting nutrient charge fertilizer were determined for seedling raising using cylindrical paper pots. A root medium was formulated by blending of peat moss (particles smaller than 2.84 mm were 80-90%) and perlite (1 to 3 mm) with the ratio of 7:3 (v/v). The treatment N concentrations incorporated during the root medium formulation were adjusted to 0, 150, 250, 500, and $750mg{\cdot}L^{-1}$ and the concentrations of essential nutrients except N were equal in all treatments. After making of paper pots and putting into the 40-cell tray, the seeds of Chinese cabbage ('Chunmyeong Bom Baechu') and pak-choi ('Hanog cheonggyeongchae') were sown. During the raising of seedlings, weekly analysis of medium pH, EC and concentrations of inorganic elements were conducted. After 21 and 20 days after seed sowing of Chinese cabbage and pak-choi, the growth of the above-ground parts were measured and contents of inorganic elements in the plant tissues were analyzed. During the growing period, pH of the root media rose gradually and the EC decreased rapidly at week 3. The pH of root media at harvest was in the range of 5.3 to 5.9 in Chinese cabbage and 4.93 to 5.39 in pak-choi. Growth of the aboveground parts in terms of fresh and dry weight in both the plants were the highest in the $250mg{\cdot}L^{-1}$ N treatment and the lowest in the control treatment. The elevation of pre-planting N concentrations in root medium resulted in the increase of tissue N content and decrease of P, Ca, and Mg contents. The regression equation derived from the influence of varied pre-planting N concentrations on dry weight of above-ground tissue were $y=-0.0036x^2+0.0021x+0.0635$ ($R^2=0.9826$) in Chinese cabbage and $y=-0.16x^2+0.0009x+0.032$ ($R^2=0.991$) in pak-choi. When the low critical concentration of pre-plant N is taken at the point where dry weight of above-ground tissue is 10% less than maximum (0.40 g in Chinese cabbage and 0.16 g in pak-choi), those point are 0.36 g and 0.144 g per plant in Chinese cabbage and pak-choi, respectively. The lower critical N concentrations of root media calculated from the regression equations are $196mg{\cdot}L^{-1}$ for Chinese cabbage and $187mg{\cdot}L^{-1}$ for pak-choi. These results indicate that optimum pre-plant N concentrations for seedling raising using paper pots are in the range of 196 to $250mg{\cdot}L^{-1}$ for Chinese cabbage and 187 to $250mg{\cdot}L^{-1}$ for pak-choi.